}

Tender For Modernization Of Bharath Ratna Dr.Mgr New Bus Stand, TIRUNELVELI CORPORATION MAIN OFFICE-Tamil Nadu

Municipal Adminitration And Water Supply Department-MAAWSD has published Tender For Modernization Of Bharath Ratna Dr.Mgr New Bus Stand. Submission Date for this Tender is 12-02-2020. Bus Stand Tenders in TIRUNELVELI CORPORATION MAIN OFFICE Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

23366038
Tender For Modernization Of Bharath Ratna Dr.Mgr New Bus Stand
Open Tender
Indian
Tamil Nadu
TIRUNELVELI CORPORATION MAIN OFFICE
12-02-2020

Tender Details

Tender For Modernization Of Bharath Ratna Dr.Mgr New Bus Stand

Key Value

Document Fees
Refer document
EMD
INR 1480000.0 /-
Tender Value
INR 14.80 Crore /-

BOQ Items

Name of Work : MODERNISATION OF BHARATH RATNA DR.MGR NEW BUS STAND
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete BI01010001010000000000000515BI0100001115 7853 m3
2 2 Plain Cement Concrete 1:4:8 (one cement, Four fine aggregates and Eight coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification BI01010001010000000000000515BI0100001116 400 m3
3 3 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) BI01010001010000000000000515BI0100001117 1413 m3
4 4 Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed BI01010001010000000000000515BI0100001118
5 5 For Plinth Beam BI01010001010000000000000515BI0100001119 3461.84 m2
6 6 For Columns BI01010001010000000000000515BI0100001120 1720.46 m2
7 7 For RooF Beams And Slabs BI01010001010000000000000515BI0100001121 4892.24 m2
8 8 Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. BI01010001010000000000000515BI0100001122 177016 KG
9 9 Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification BI01010001010000000000000515BI0100001123 484 m3
10 10 Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification BI01010001010000000000000515BI0100001124 916 m2
11 11 Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock to required size as directed by the departmentalofficers of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. BI01010001010000000000000515BI0100001125 1310 m2
12 12 Brick work in Cement Mortar 1:5 Mix Using kilnburnt Country bricks of size 83/4" x 41/4" x 23/4" from approved quarry including cost and conveyance of materials to site and all labour charges etc., complete asper standard specifications BI01010001010000000000000515BI0100001126 525.662 m3
13 13 Brick Partition wall using kiln burnt counltry bricks size of 83/4" x 41/4" x 23/4" from approved quarry in Cement Mortar 1:3 , 10.8cm. thick with all cost and conveyance of materials and labour charges etc., complete as per standard specification BI01010001010000000000000515BI0100001127 104 m2
14 14 Plastering with Cement Mortar 1:5 mix. using 12mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification BI01010001010000000000000515BI0100001128 4622 m2
15 15 Supplying and laying in flooring with fully polished Synthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers BI01010001010000000000000515BI0100001129 1593 m2
16 16 Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. BI01010001010000000000000515BI0100001130 419 m3
17 17 Paving the floor with ceramic tiles siratch proof design of size 305mm x 305mm x 6mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surfaceetc complete BI01010001010000000000000515BI0100001131 95 m2
18 18 Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. BI01010001010000000000000515BI0100001132 137 m2
19 19 Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] BI01010001010000000000000515BI0100001133 754 Rm
20 20 Plastering with Cement Mortar 1:4 , using 20mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification BI01010001010000000000000515BI0100001134 5860 m2
21 21 Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete. BI01010001010000000000000515BI0100001135 180 m3
22 22 Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete BI01010001010000000000000515BI0100001136 2488 m2
23 23 Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. BI01010001010000000000000515BI0100001137 7406.14 m3
24 24 Supplying and Erecting of Rolling Shutters shall be pull and push type ( manually operated) made of 18 G/3" lathe sections which consist of five main parts such as curtain, lock plate, guide channels, rollers and hood cover. These five main parts are made out of special components detailed below. Curtain shall be of 18G/3" lathe sections cut to required size and filled with heavy cast iron/ MS clips for 8'0" (245 m) heigh rolling shutter lathe sections provided shall be not less than 37 numbers. Lock plate shall be 10 G sheet and attached to the side bracket with 20mm square bar. Side brackets shall be 10 G MS plate and cast iron "u" clamp shall be riveted to the side brackets. Roller shall be heavy cast iron piles fitted with heavy duty "c" class 40 mm steel pipe and high tensile high carbon coil springs, 2 spring shall be supplied side brackets shall be of 100 G MS plate and cast iron "u" clamp shall be riveted to the side brackets. Hood cover shall be of 0.80 mm CRCA sheet reinforced with 25mm x 25mm x 25 mm x 3mm MS angles of gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heave coat of red oxide primer etc., complete complying standard specification (GEAR operated type from 8 sq.m. to 12 sq.m area) \n BI01010001010000000000000515BI0100001138 192 m2
25 25 Painting 2 coats with approved cement paint over one priming coat of cement paint over cement plastered wall surface and ceiling ,(other new surface ) including cleaning, preparing the surface and curing etc., complete. BI01010001010000000000000515BI0100001139 10482 m2
26 26 Painting two coats with ready mixed enamel paint of approved colour and quality including priming coat over New Iron work etc., complete 10sqm. BI01010001010000000000000515BI0100001140 384 m2
27 27 Supplying And Fixing Of Pipe Lines 110mm dia PVC Pipes For Water Supply in Shops BI01010001010000000000000515BI0100001141 560 Rm
28 28 Supplying And Fixing Of Pipe Lines 50mm dia PVC Pipes For Water Supply in Shops BI01010001010000000000000515BI0100001142 560 Rm
29 29 Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., BI01010001010000000000000515BI0100001143 4 Nos
30 30 Supplying & fixing door shutters for Medium Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete. BI01010001010000000000000515BI0100001144 9 m2
31 31 Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification BI01010001010000000000000515BI0100001145 35 m2
32 32 Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. BI01010001010000000000000515BI0100001146 18 Nos
33 33 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers BI01010001010000000000000515BI0100001147 4 Nos
34 34 S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour BI01010001010000000000000515BI0100001148 10 Nos
35 35 Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications BI01010001010000000000000515BI0100001149 12 Nos
36 36 Supplying and fixing in position of alulminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beamsor masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium sirface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections. BI01010001010000000000000515BI0100001150 11 Nos
37 37 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding grinding, polishing, conveyance, electrical charges, etc. complete. BI01010001010000000000000515BI0100001151 795 m2
38 38 Supply and Delivery of Plastic Wheeled Dust Bins Topside Fully Covered GBRW 00-12-04 120 litres Capacity 940mm Height, Top Side 540mm and Bottom Side 480mm painted with TCMC Logo. BI01010001010000000000000515BI0100001152 30 Nos
39 39 Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation-250 Litres BI01010001010000000000000515BI0100001153 12 Nos
40 40 Supply and Fixing of CCTV Cameras 5 units with Specification of Dahua- HAC-HFW 1100DP-B-0600 720P 1 Mega Pixel Analog High Definition camera, outdoor-25/30 fps@720P,1/2.9" 1 Megapixel CMOS, 50m IR,ICR, 6mm Lens optional, IR Bullet Dahua - Channel - AHD, High Video Quality on HD 1080N, Transmit Video Signal, audio signal & Dual way data communication signal over one coaxial cable, HD Video transmission without Video quality loss & delay, extremely, long transmission distance (300), Support analog 1280 H Video output, Seagate HDD 1000GB 12V 20Ah Camera Power adapter, BNC & DC Pins 18.5" Compaq HP Monitor including camera fittings charges 3+1 CCTV Cable, Cable laying with Electrical Materials, Underground Laying ( Based on Site) as directed by Departmental Executive Engineer. BI01010001010000000000000515BI0100001154 8 Nos
41 41 Supply, delivery and Fixing of 48W LED Street light Fitting in the New GI Tubular Pole for Street Light 8 metre Length free standing Single arm 8 sided octagonally continouosly tapered structured Bracket Pole with Base Plate (300x300x12mm),bottom pole dia 130mm top pole dia 70mm 3mm thk, Fitting Made of Pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF z 0.9. System efficiency 285. Operating voltage range of 120V to 270V with surge arrestor inimum of 1kV. Maximum Driver not than 700mA. THD < 10%. Lumens package not less than 105 Im/W for LED Source. Test certificate from NABL (National accredited board for testing & Calibration laboratory) for LM79 report. In house testing facility to be available for the same, Lamp life not less than 50,000 hours etc. complete as per standard Specifications. Supply and Fixing of 2 sets of clamps 7” x 3” x 4mm size made of MS flat of size 25mm wide x 3mm thick suitable for EB RCC pot with 6 Nos of 5/8” full thread 2” length MS bolts & nuts and 40mm dia “b” class pipe of 1.50m metre length bent in l shape. The power supply should be of 1100V copper flexible cable of PVC insulated unsheathed 3 core x 1.5sqmm in 3 meter length. The rate includes the labour charges, fixing new 48 W LED lamp fitting and termination etc., complete as directed by the departmental officer. BI01010001010000000000000515BI0100001155 56 Nos
42 42 Supply and Delivery of 30W LED street light system made up of prisine die cast aluminium housing with heat resistant toughened glass coven confirming to IP65. Separate compartment for LEDs & Electronic driver with CCT of 5700k, Df > 0.9, system efficiency >85.Operating voltage Range of 120V to 270V with surge arrester minimum of 1 kV. Driver current not less than 700mA. THD < 10%. Lumens package not less than 105/m/W for LED source. Test certificate from NABL(National Accredited Board for testing and calibration Laboratory) for LMM report. In house testing facility to be available for the same lamp life not less than 50,000 hours etc. complete as per standard specification. BI01010001010000000000000515BI0100001156 200 Nos
43 43 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 BI01010001010000000000000515BI0100001157 2543 m3
44 44 Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. BI01010001010000000000000515BI0100001158 2543 m3
45 45 Providing and laying prime coat over WBM / WMM surface using 7 Kg of Emulsion Bitumen (SS1) per10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5 BI01010001010000000000000515BI0100001159 8474 m2
46 46 Providing and laying tack coat over WBM / WMM surface ( treated with primer ) using 2.50 Kg of Bitumen Emulsion ( RS1 ) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5 BI01010001010000000000000515BI0100001160 24873 m2
47 47 Providing and laying prime coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications BI01010001010000000000000515BI0100001161 8474 m2
48 48 Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 BI01010001010000000000000515BI0100001162 997 m3
49 49 Providing and laying Bituminous concrete to 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required,including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications. BI01010001010000000000000515BI0100001163 997 m3
50 50 Providing and laying of hot applied themoplastic compound 2.5mm thick including reflectorsing glass beads at 250gram/sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as IRC 35.The finished to be level uniform and free from streaks and holes etc. complete as per MORT and H specification no. 803 BI01010001010000000000000515BI0100001164 611 m2
51 51 Providing and fixing of road stud 100 x 100mm diecast in aluminium ressistance to corrosive effect of sait and grift fitted eith lenes reflected instaled in concrete or asphalts surface by drilling hole 30mm upto a depth of 60mm and beded in a suitable bitumens grout are epoxy mortar etc., complete as per BS (part) 1973. BI01010001010000000000000515BI0100001165 668 nos
52 52 Supply and'flxlng of 65 mm (21/2") GI pipe (Class 'B') of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with suitabie- MS box to house 5A control switch 16 A fuse unit (500V) etc. with suitable angie iron frame work, with door and with lock and _key arrangements-and with supply and ?xing of 4' 20W LED Fitting Single street light fitting 1 metre of 32mm dia 61 pipe (Class 'B') complete, with necessary clamps, on the above post 'with PVC unsheathed leads with painting of suitable colour. BI01010001010000000000000515BI0100001166 30 nos
53 53 Supply,erection,testing and commissioning of following indoor type 11KV/433V cast resin dry type transformer inclding all asssesories and componenets as required.rate shall be inclusive of transportation,bottom mounting,minor civil works,foundations and test etc. 1000KVA Transformer (ANNEXURE VII Part M 1 d ) BI01010001010000000000000515BI0100001167 6 nos
54 54 Supply and laying of 3 1/2 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. SD 205 BI01010001010000000000000515BI0100001168 640 rmt
55 55 Supplying , Fixing and Commisioning Passenger Information Display Its Controller Unit With GPRS/GPS Modem with 3G Support, PIS-Stop announcements Based on GPS Co ordinates and Displayin internal LED Boards , Route Display in External Display Boards, Route Selection Option Thro Driver Display. Building Amblifier for bus stop And Driver Announcements, Building 4 Channel DVR-Support 4 x Cameras,USB interface For Downloading Video Data And Uploading Route Info Messages Etc,. External GPS Antenna, IP 54 Enclosure with Industrial connectors, 7" Touch Screen Driver Display (IP 54), Microphone 4 Speakers, PANIC Button, Survilence Camera 2 Nos Internal,. including all Materials of Loading, unloading, Transporting and All Labour Charges etc,. Complete. BI01010001010000000000000515BI0100001169 6 Nos
56 56 Supplying , Fixing and Commisioning Variable Message Display Full colour RGB LED Display, Outdoor, Water Proof, Day & Night Visible VMD P8 SMD Pitch mm, (6 ft x 10 ft) of Size, 384 x640 LED Matrix Resolution, 6000-6500 of Brightness Cd/m2, 3g/4G GPRS Control System For VMD, Including Unipole Structure,Civil Work and Installation with Electrical Power Supply Wiring & all Materials of Loading, unloading, Transporting and All Labour Charges etc,. Complete. BI01010001010000000000000515BI0100001170 6 Nos
57 57 Supply and erection of 25KW Solar On Grid Solar Rooftop System from Go Solar Solutions consists of following components.Make : Canadian Solar/Vikram SolarType : Poly-crystalline Power: 315/320/325/330 Wp (According to Availability)Quantity: 158 No Size : 2000mm x 1000mm (2 meters x 1 meters) Voltage : 440/220Volts On Grid Solar Inverter Make : Delta Inverter (German) Size : 50kW Phase : Three (3 Phase) Quality : Premium Quantity : 1 Unit \nOutput : 440/230 Volts @ 50Hz\nMonitoring System : Yes (DelREMO-Delta Realtime Monitoring) Type : Wifi/Lan/GSM Mobile Apps : Yes Electrical Accessories (Compulsory)\nDC Distribution Box: Yes (Fuse+Surge Trap+MCCB Breaker) \nAC Distribution Box: Yes (Fuse+Surge Trap+MCCB Breaker) Mounting Structure: Type : Aluminium or Galvanized \nAngle : As per site requirement \nDesign : Customized Wiring & Cabling Make : Polycab \nMaterial: Copper Size : 6mm2 Solar Power Output (Generation) Units per Day: 225 kWh Units Per Month : 6750 Units Units Per Year : 72,500 Units DC Side: Armoured Cable \n BI01010001010000000000000515BI0100001171 14 Nos
58 58 Supply and fixing of Retro Reflective Single arrow road name sign board of size 1600mm x 900mm made out of retro reflective sheeting conforming to Type XI standards of ASTM D 4956 – 09 & as per IRC 67-2012 specifications fully covered over 2mm thick aluminium and back support frame MS angle of 25mm x 25mm x 3mm, supported by 2 nos of vertical posts 73mm OD@3.69kg/M SCH 5 Grade Stainless Steel pipe firmly fixed to the ground by means of properly designed foundation of size 300mm x 300mm x 450mm with M15 grade cement concrete and the item shall include earthwork excavation, cost of all materials, loading, unloading, lead, lift, transportation etc., complete. The sign board background shall be blue in color with letters and border in white. 10 years pre-qualification warranty as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the sheeting manufacturer & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender. BI01010001010000000000000515BI0100001172 12 Nos
59 59 Providing Through Vertical Joint with 12mm space filled with bitumenous compound running from bottom of foundation upto the top of parapet wall as directed- 10 m2 (S.I.149) data 85 BI01010001010000000000000515BI0100001173 20 Sq.M
60 60 R.C.C. precast slab with 25mm thick in RCC M20 Mix using 20mm hard broken stone jelly and river sand including the cost of reinforcement grill and fabrication charges, complete complying with standard specification and as directed by the departmental officers. Data BI01010001010000000000000515BI0100001174 14 Sq.M
61 61 Dismantling the existing damaged brick or stone masonary wall in cement mortar, clearing away and carefully stacking materials useful for re-use for any thickness of walls including all labour charges etc complete. PWD SOR P,No 24 Sl. No. 15 BI01010001010000000000000515BI0100001175 237 Cum
62 62 Dismantling Using Mahineries the Existing damaged RCC beam,slab&columns up to 3m height clearing away and carefully stacking materials useful for re-use for any thickness including all labour charges etc..complete as per standard specification. PWD SOR P,No 25 Sl. No. 35A BI01010001010000000000000515BI0100001176 47 Cum
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail