Tender For Repair-Maintenance Of Fire Tenders(03) & Fire Jeeps(02)-Matching Jobs(Make-Ashok Leyland, Model-Comet) -, ROURKELA-Odisha

Tender For Repair-Maintenance Of Fire Tenders(03) & Fire Jeeps(02)-Matching Jobs(Make-Ashok Leyland, Model-Comet) -1)BODY WORK: TOTAL BODY SHEETS REMOVED FROM THE BODY STRUCTURE # REPLACING THE DAMAGED / RUSTED ANGLES, BOX CHANNELS, FRAME SHEET, DOOR FRAME AND REPAIRING THE BODY STRUCTURE AS EXISTING BODY DESIGN. ALL EXTERNAL BODY SHEET, OTHER DAMAGED SHEET AND ALL DOORS / BODY INTERNAL SHEET TO BE REPAIRED / REPLACED WITH NEW 18 GAUGE ALUMINUM SHEET WITH SYNTHETIC PADDING TO AVOID BODY SHEET VIBRATION. DAMAGED PORTION OF FRONT SIDE SHEET SHALL BE REPLACED WITH NEW SHEET AND FRONT BUMPER, FRONT MUDGUARDS AND REAR MUDGUARDS SHALL BE REPAIRED WITH NEW SHEET (1.5 MM CR SHEET). ALL DAMAGED DRAWER FLOORS SHOULD BE REPLACED WITH NEW 03 MM ALUMINIUM CHEQUER PLATE WITH ADEQUATE BOTTOM CHANNEL (1.5#) SUPPORTSREAR FOOT RESTS SHOULD BE FABRICATED WITH 1.5# BOX CHANNEL COVER WITH 03 MM ALUMINUM CHECKER PLATE & FLEXIBLE STEPS FABRICATED BELOW THE REAR FOOTREST. ROOF TOP ALUMINUM CHECKER PLATES SHOULD NOT BE REPLACED. ALL DAMAGED / WEAKED HINGES OF DOORS & DRAWERS TO BE REPLACED WITH NEW. ALL DOORS & DRAWER LOCKERS SHALL BE FITTED WITH NEW HEAVY DUTY LOCK ASSEMBLY WITH TWIN STEPS STOPPERS. REPLACING OF ALL DOOR GLASSES (TOUGHENED GLASS), LIFTING MACHINES (DOORS), ALL LEVERS (DOORS & LOCKERS), NYLON RUBBER SEAL (FRONT WIND SHIELD GLASSES), ALL VELVETS CHANNELS (GLASS CHANNEL WITH GOOD QUALITY), ALL NYLON RUBBER SEAL (DOORS, WITH GOOD QUALITY), CABIN FLOOR ALUMINUM CHECKER PLATES SHOULD BE REMOVED AND DAMAGED CR SHEET REPLACED WITH NEW ONE THERE AFTER EXISTING CABIN FLOOR ALUMINUM CHECKER PLATES FIXED. EXTINGUISHER DRAWERS SHALL HAVE FLEXIBLE NYLON STRIP ARRANGEMENT FOR EASY FIXING / REMOVAL OF EXTINGUISHERS. NEW BATTERY STAND FRAME WITH CLAMPING ARRANGEMENT. REPAIRING OF DRIVER SEAT FRAME. PARTITION / PARTIAL MODIFICATION OF BOTH SIDE LOCKERS (1ST, 2ND & 4TH) FOR PROPER STORAGE OF EQUIPMENTS WITH 03MM ALUMINIUM CHEQUER PLATE WITH ADEQUATE BOTTOM CHANNEL SUPPORT (1.5#). ALL LOCKERS SHALL HAVE 07CM RISER. ALL LOCKER FRAME BOX CHANNEL SHALL BE OF MILD STEEL. OUTSIDE CLIMBING RAIL REPAIRING. ADDITIONAL SUPPORT FOR ROOF TOP LADDER STAND. CLAMPING ARRANGEMENT FOR FIRE HOOK, FIRE BEATER AT ROOF TOP ETC. WINDSHIELD SUNRAY PROTECTION ARRANGEMENT. MUD FLAP FOR ALL WHEELS. NEW AIR PRESSURE HORN FIXING. BOTH SIDE NEW REAR-VIEW MIRRORS SHALL BE FITTED NEW (14#). 2)SUSPENSION SYSTEM: OVERHAULING OF BOTH FRONT & REAR SUSPENSION SYSTEM. CAMBERING OF LEAF SPRINGS, FITTING OF NEW SPRING PIN, BUSHES, SHACKLE BUSHES, U- BOLTS, CENTRE BOLTS & LOCKS PINS ETC.) 3)STEERING SYSTEM: OVERHAULING OF KINGPINS & STEERING SYSTEM. FITTING OF NEW KING PIN WITH BEARING / BUSHES, STEERING BOX OVERHAULING, TIE-ROD ENDS REPLACEMENT AND ALIGNMENT OF FRONT WHEEL. 4)WHEEL SYSTEM: ALL FRONT & REAR WHEEL BEARINGS OVERHAULING & GREASING. 5)BRAKE SYSTEM: COMPLETE OVERHAULING OF BRAKE SYSTEM. FITTING OF NEW BRAKE SHOES, REPLACEMENT OF ALL DAMAGED PARTS, FITTING OF NEW VALVEKITS, BRAKE CHAMBER KITS6)CLUTCH SYSTEM & PROPELLER SHAFTS: OVERHAULING OF CLUTCH SYSTEM & MAIN PROPELLER SHAFT. REPLACEMENT OF CLUTCH PLATE, FITTING OF NEW PRESSURE PLATE ASSEMBLY, RELEASE BEARING, CLUTCH WITH DRAW PLATE. CHECKING & OVERHAULING OF BOTH THE PROPELLER SHAFT U-J CROSS BEARING ASSEMBLY, SLIP SHAFT YOKE ASSEMBLY, CENTRE BEARING, YOKE ASSEMBLY. 7)PAINTING - THOROUGH SCRAPPING OF ALL PAINTED SURFACES. OUTSIDE BODY COMPLETE PAINTING WITH PRIMER PAINT (SINGLE COAT) FOLLOWED BY POSTAL RED AUTOMOTIVE 2K DUCO MAKE (DOUBLE COAT) THEREAFTER #CLEAR COAT# COATING (SINGLE COAT). INTERIOR PAINTING WITH LIGHT GREY DUCO MAKE PAINT (DOUBLE COAT). CHASSIS PAINTING WITH RED OXIDE (SINGLE COAT) FOLLOWED WITH GREY PAINT (SINGLE COAT). PAINTING OF ALUMINUM CHECKER PLATE WITH ALUMINUM PAINT DUCO MAKE (DOUBLE COAT). PAINTING OF FIRE PUMP & AUXILIARIES WITH PRIMER (SINGLE COAT) FOLLOWED WITH POSTAL RED AUTOMOTIVE PAINT (SINGLE COAT). PAINTING OF ALL STRUCTURE FRAMES WITH PRIMER (SINGLE COAT). PAINTING OF WATER TANK: INTERNAL AS WELL AS EXTERNAL WITH SINGLE COAT PRIMER PAINT AND INTERNAL WITH DOUBLE COAT ANTI CORROSIVE SYNTHETIC RUBBER PAINT. SAIL LOGO STICKERING ON FRONT DOOR (BOTH SIDES) WITH 8# SIZE (YELLOW/NAVY BLUE COLOUR). BOTH SIDE OF COMPLETED VEHICLE SHALL BE STICKERING WITH # STEEL AUTHORITY OF INDIA LTD, ROURKELA STEEL PLANT, IN 4# YELLOW COLOR CAPITAL LETTERS WITH LEFT SIDE 10# YELLOW COLOUR #SAIL LOGO# STICKERING, ALL VEHICLE PARTICULARS, NUMBER PLATES & VEHICLE REGD. NUMBER SHALL BE STICKERING ON THE LEFT FACE/SUITABLE PLACE OF THE VEHICLE., etc.

Refer document

INR 15000.0 /-

Refer document