Military Engineer Services-MES has published Repair Of Servo Stabilizer , Apfc Panel And Connected Items At Af Stn Phalodi. Submission Date for this Tender is 09-06-2020. Greases Tenders in PHALODI Rajasthan. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Feb-2020 | Date Corrigendum | Date | 11-03-2020 |
2 | 05-Mar-2020 | DATE CORRIGENDUM 2 | Date | 21-03-2020 |
3 | 16-Mar-2020 | DATE POSTPONED | Date | 28-03-2020 |
4 | 21-Mar-2020 | Date_C | Date | 25-04-2020 |
5 | 20-Apr-2020 | Further date corrigendum | Date | 26-05-2020 |
6 | 20-May-2020 | D_C | Date | 01-06-2020 |
7 | 03-Jun-2020 | DC | Date | 09-06-2020 |
Name of Work : REPAIR OF SERVO STABILIZER, APFC PANEL AND CONNECTED ITEMS AT AF STN PHALODI | |||||
---|---|---|---|---|---|
Srl. No. | Item Description | Item Code / Make | Approx No of Units reqd | Units | |
1 | 1 | Repair of existing automatic / manual type APFC panel cleaning of dust inside the panel by using electric blower, contactor relay, junction point/ connection servicing overhouling of cooling fan, testing of APFC relay & including necessary setting with current transformer(CT) load adjustment to match of 50 KVAR to 200 KVAR to set the power factor in range between 0.96 to 0.99 complete all as specified and directed. \nNote :- (i) Minor item / spares parts shall deemed to be included in the above & not to be paid separtely.\n(ii) Major parts/items required to be replaced shall be measured and paid for separately under respective items here-in-after. | 15 | Each\nJob | |
2 | 2 | S & F in renewal of existing contactor capacitor, duty type, 3 pole, AC, of capacity having coil voltage 250 Volt up to suitable for 20 KVAR along with 1 NO + 1 NC auxilary contact complete all as specified and directed.\nMake: - C&S /L&T/Ducati. | 10 | Each\n | |
3 | 3 | S & F in renewal of existing contactor capacitor, duty type, 3 pole, AC, of capacity having coil voltage 250 Volt up to suitable for 25 KVAR along with 1 NO + 1 NC auxilary contact complete all as specified and directed.\nMake :- C&S /L&T/Ducati. | 7 | Each\n | |
4 | 4 | S & F in renewal of APFC /AIPFC relay source type with protection device intelligent automatic processor on power controller unit up to 8 stage complete all as specified and directed. \nMake :- Cat Part No 415-98-9040 of Ducati or Equivalent Make/Model of EPOCS /ENERCON. | 5 | Each\n | |
5 | 5 | All ditto as per item No. 4.00 (here-in-before) but 12 stage complete all as specified and directed. | 3 | Each\n | |
6 | 6 | S & F in renewal of capacitor, 3 phase, 415 Volt, 50 HZ & APP type, electric to ISS 13340 /13341 to ICC 9311, of capacity 5 KVAR (bottle type), gas filled complete all as specified and directed.\nMake :- EPOCS /ABB /Ducati. | 20 | Each\n | |
7 | 7 | All as per item No. 6.00 (here-in-before) but capacitor capacity 10 KVAR complete all as specified and directed. | 20 | Each\n | |
8 | 8 | All as per item No. 6.00 (here-in-before) but capacitor of capacity 12.5 KVAR complete all as specified and directed. | 15 | Each\n | |
9 | 9 | All as per item No. 6.00 (here-in-before) but capacitor of capacity 15 KVAR complete all as specified and directed. | 15 | Each\n | |
10 | 10 | All as per item No. 6.00 (here-in-before) but capacitor of capacity 25 KVAR complete all as specified and directed. | 5 | Each\n | |
11 | 11 | S & F in renewal of Volt meter 0-500 Volt, digital type of size 96mm x 96 mm square, flush mounted type having lamp accuracy glass (-1) complete all as specified and directed. \nMake :- AE/ENERCON/IMP/HPL/Havells. | 10 | Each\n | |
12 | 12 | S & F in renewal of Ammeter 0-200 Amp, digital type of size 96mm x 96 mm Square, flush mounted type having lamp accurracy glass --1 complete all as specified and directed. \nMake :- AE/ENERCON/IMP/HPL/Havells. | 12 | Each\n | |
13 | 13 | S & F in renewal of current transformer (CT) coil suitable for Amp meter 100/5 Amp complete all as specified and directed. \nMake :- AE/ENERCON/EPCOS. | 18 | Each\n | |
14 | 14 | S & F in renewal of indicating lamp set RYB for phase indication operating on 240 Volt, 50 HZ, AC with new one LED panel, mounting type to match existing one complete all as specified and directed. \nMake :- L&T/C&S/ABB. | 15 | Set of Three | |
15 | 15 | M & L in renewal of main incoming Single Core FRLS Round PVC Insulated Industrial Grade Copper Conductor 10 Sqmm (Unsheathed) Flexible Cables, 1100 Volts,conforming to IS: 694 complete all as specified and directed.\nMake :- Havells/Polycab/Finolex/RPG Cables. | 50 | RM | |
16 | 16 | S & F in renewal of MCB, single pole, 6 to 32 Amp, 'C' curve having rupturing capacity 10 KA conforming to IS-8828-1996, IEC-60898, complete all as specified & directed. | 20 | Each\n | |
17 | 17 | S & F in renewal of MCB, TP, 63 Amps, 415 Volts, C-curve, rupturing capacity 10KA conforming to IS-8828-1996, IEC-60898, complete all as specified & directed. | 14 | Each\n | |
18 | 18 | S & F in renewal of MCB, TP, 40 Amps, 415 Volts, C-curve, rupturing capacity 10KA conforming to IS-8828-1996, IEC-60898, complete all as specified & directed. | 5 | Each\n | |
19 | 19 | M & L for complete servicing, overhauling, testing and replacement of minor parts as required in repair for Voltage Stabilizer, 3 Phase, of capacity 20 KVA to 75 KVA, 415 Volt, 50 Hz complete all as specified and directed.\nNote :- (i) Minor item / spares parts shall deemed to be included in the above & not to be paid separtely.\n(ii) Major parts/items required to be replaced shall be measured and paid for separately under respective items here-in-after. | 2 | Each Job | |
20 | 20 | M & L for complete servicing, overhauling, testing and replacement of minor parts as required in repair for Voltage Stabilizer, 3 Phase, of capacity 100 KVA to 300 KVA, 415 Volt, 50 Hz complete all as specified and directed.\nNote :- (i) Minor item / spares parts shall deemed to be included in the above & not to be paid separtely.\n(ii) Major parts/items required to be replaced shall be measured and paid for separately under respective items here-in-after. | 3 | Each Job | |
21 | 21 | S & F in renewal of Togal Switch suitable for 3 Phase Voltage Stabilizer complete all as specified and directed. | 10 | Each | |
22 | 22 | M & L for disconnecting/dismantling primary & secondary connection carefully of servo voltage stablizer, out door/indoor type, of capacity 50 KVA to 300 KVA from its foundation and including safely shifting from one place to another place (where directed by Engr-in-Charge) and re-connection of cabling, earthing, installation, testing and commissoning of the servo voltage stablizer complete all as specified and directed.\nNote :- (i) Renewal of minor items /spares such as bearing, foundation nuts, bolts, washers, fresh grease, etc shall be deemed to be included in the unit rate quoted.\n(ii) Cost of necessary tools and plants such as Back Hoe Loader (JCB), vehicle, ladders, hydra/crane for shifting & re-connection of servo voltage stablizer etc shall be deemed to be included in the unit rate quoted of item. | 2 | Each Job | |
23 | 23 | M & L for painting of servo voltage stablizer externally spray painting with synthetic enamel paint of grey color after cleaning surfaces throughly with thinner and scrapper and preparing the surface to required standard and including writing and marking such as MES No on the body of servo voltage stablizer of capacity upto 75 KVA complete all as specified and directed. | 10 | Each Job | |
24 | 24 | M & L for painting of servo voltage stablizer externally spray painting with synthetic enamel paint of grey color after cleaning surfaces throughly with thinner and scrapper and preparing the surface to required standard and including writing and marking such as MES No on the body of servo voltage stablizer of capacity upto 100 KVA to 300 KVA complete all as specified and directed. | 10 | Each Job | |
25 | 25 | M & L for servicing/fault detection of working/non working existing voltage stabilizer automatic operation, three phase of various Makes & capacity exceeding 16 KVA but not exceeding 100 KVA at different locatoins by dismantling / opening the stabilizer for checking the parts/components, circuit for proper functioning, cleaning inside the stabilizer and including renewal of defective minor items i.e. screws, lugs, cut out/fuses, reset switches, rubber packing etc. and Re-assembling the stabilizer, testing on rated equipment load for automatic operation to stabilizer standard out put voltage, complete all as specified and directed.\nNote :- (i) Minor item / spares parts shall deemed to be included in the above unit rate quoted & not to be paid separtely.\n(ii) Major parts/items required to be replaced shall be measured and paid for separately under respective items here-in-after. | 13 | Each Job | |
26 | 26 | All as per item No. 25 (here-in-before) but capacity of Servo Voltage Stabilizer exceeding 100 KVA but not exceeding 300 KVA complete all as specified and directed. | 8 | Each Job | |
27 | 27 | S & F in renewal of push butten switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 5 | Each | |
28 | 28 | S & F in renewal of Auto manual switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 10 | Each | |
29 | 29 | S & F in renewal of Micro switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 4 | Each | |
30 | 30 | S & F in renewal of PCB holder as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 9 | Each | |
31 | 31 | S & F in renewal of Carbon bush as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 10 | Each | |
32 | 32 | S & F in renewal of Carbon bush holder as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 9 | Each | |
33 | 33 | S & F in renewal of Trigger transformer as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 7 | Each | |
34 | 34 | S & F in renewal of Amp metre selector switch as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 8 | Each | |
35 | 35 | S & F in renewal of Shunt coil, 220 Volt, AC, as per existing Make and suitable for servo stabilizer of capacity upto 300 KVA complete all as specified and directed. | 5 | Each | |
36 | 36 | S & F in renewal of electronic circuit card (PCB) as per existing Make and suitable for automatic three phase stabilizer of capacity 16 KVA to 50 KVA of various Make with high & low Voltage cutout device but excluding ICS, complete all as specified and directed. | 6 | Each | |
37 | 37 | All as per item No. 36 (here-in-before) but capacity of Servo Voltage Stabilizer exceeding 60 KVA but not exceeding 75 KVA complete all as specified and directed. | 5 | Each | |
38 | 38 | All as per item No. 36 (here-in-before) but capacity of Servo Voltage Stabilizer 100 KVA complete all as specified and directed. | 1 | Each | |
39 | 39 | All as per item No. 36 (here-in-before) but capacity of Servo Voltage Stabilizer exceeding 150 KVA but not exceeding 160 KVA complete all as specified and directed. | 1 | Each | |
40 | 40 | All as per item No. 36 (here-in-before) but capacity of Servo Voltage Stabilizer exceeding 200 KVA but not exceeding 300 KVA complete all as specified and directed. | 2 | Each | |
41 | 41 | S & F in renewal of Servo motor with RC net work 3 Kg as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 20 KVA to 40 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 5 | Each | |
42 | 42 | S & F in renewal of Servo motor with RC net work 3 Kg as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 50 KVA to 75 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 9 | Each | |
43 | 43 | S & F in renewal of Servo motor with RC net work 10 Kg as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 100 KVA to 150 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 8 | Each | |
44 | 44 | S & F in renewal of Servo motor with RC net work 10 Kg as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 200 KVA to 300 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 7 | Each | |
45 | 45 | S & F in renewal of Control circuit Low/high Cut off with relay as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 40 KVA to 60 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 3 | Each | |
46 | 46 | S & F in renewal of Control circuit Low/high Cut off with relay as per existing Make and suitable for 3 Phase Voltage Stabilizer of capacity 75 KVA to 300 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 7 | Each | |
47 | 47 | M & L in renewal of Gas Ket Sets as per existing Make and suitable for 3 Phase Voltage Stabilizer complete all as specified and directed. | 3 | Each\nJob | |
48 | 48 | S & F in renewal of gear and driver assembly as per existing Make and suitable for Voltage Stabilizer of capacity exceeding 50 KVA but not exceeding 100 KVA per phase complete all as specified and directed. | 2 | Each | |
49 | 49 | S & F in renewal of gear and driver assembly as per existing Make and suitable for Voltage Stabilizer of capacity exceeding 100 KVA but not exceeding 300 KVA per phase complete all as specified and directed. | 2 | Each | |
50 | 50 | M & L in renewal of Main Boosting TR/Dimmer (variac) rewinding (Copper winding wire, heavy duty, Class A) suitable for 3 Phase Voltage Stabilizer of capacity 50 KVA to 150 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 4 | Each Job | |
51 | 51 | M & L in renewal of Main Boosting TR/Dimmer (variac) rewinding (Copper winding wire, heavy duty, Class A) suitable for 3 Phase Voltage Stabilizer of capacity 200 KVA to 300 KVA, 415 Volt, 50 Hz complete all as specified and directed. | 2 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail