West Bengal State Police Housing Corporation Limited has published Construction Of 3 Storied ( G Plus 2 ) Office Building Of Dig ( Baruipur Range ) Of Correctional Service , Wb And Executive Guest House Along With Allied Works At Presidency Jail Complex Of Baruipur , South 24 Parganas . ( 1St Call ) . Submission Date for this Tender is 18-02-2020. Building Work Tenders in Presidency Jail Complex of Baruipur West Bengal. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 11-Feb-2020 | Corrigendum 1 | Date | 18-02-2020 |
Name of Work: Construction of 3 storied (G+2) office Building of DIG (Baruipur Range) of Correctional Service, WB and Executive Guest House along with allied works at Presidency Jail Complex of Baruipur, South 24 Parganas. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Civil works | BI01010001010000000000000515BI0100001112 | ||
2 | 2 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. | BI01010001010000000000000515BI0100001113 | 590.835 | SQM |
3 | 3 | Earth work in excavation of foundation trenches of drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils with in a lead of 75m. As directed. The item includes necessary trim-ming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not execeeding 1,500 mm | BI01010001010000000000000515BI0100001114 | 956 | CuM. |
4 | 4 | Earth work in excavation of foundation trenches of drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing spreading or stacking the spoils with in a lead of 75m. As directed. The item includes necessary trim-ming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete.\nDepth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. | BI01010001010000000000000515BI0100001115 | 132 | CuM. |
5 | 5 | Earth work in filling in foundation trenches or plinth with good earth, in layer not exceeding 150mm including watering and ramming etc. layer by layer complete a) With earth obtained from excavation of foundation. | BI01010001010000000000000515BI0100001116 | 396 | CuM. |
6 | 6 | Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed and consolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) | BI01010001010000000000000515BI0100001117 | 271 | CuM. |
7 | 7 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work). With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth. | BI01010001010000000000000515BI0100001118 | 230 | CuM. |
8 | 8 | Providing Bored Cast-in-situ using tripod, winches M25 grade R.C.C. pile in position as per specifications in all kinds of soil including cost of boring using drilling mud to stabilize the bore and flushing the bore of excess mud with freshly prepared drilling fluid by using pumps prior to placing concrete by tremie pipe in one continuous operation and including the cost of all materials and labour for placing of concrete and also including the cost of mobilization and hire charges of all equipment necessary for boring, welding of reinforcement cage as necessary and lowering of reinforcement cage, preparation and placing of concrete, including the cost of concrete but excluding the cost of reinforcement and labour for bending binding etc. complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Work to be executed as per IS: 2911 (Part II Sec 2). b.iv. 450 mm dia Pile. | BI01010001010000000000000515BI0100001119 | 1500 | Mtr. |
9 | 9 | Integrity testing of Pile using Low Strain / Sonic\nIntegrity Test / Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerized equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-incharge. Within 50 km. radius from Raj-Bhavan | BI01010001010000000000000515BI0100001120 | 25 | Each |
10 | 10 | Removal of mud/sludge/slurry/liquid earth obtained during piling work from the working site and disposal of the same beyond the KMC/Municipal or any suitable area with conformity of Municipal Corporation Rules using tanker including loading and unloading the same with pump, clearing the site complete in all respect as per direction of the Engineer-in-charge. For 450mm Pile | BI01010001010000000000000515BI0100001121 | 1500 | Mtr. |
11 | 11 | Performing Lateral load test on two piles or two groups of piles by introducing a hydraulic jack with gauge between two piles or pile groups under test by applying horizontal loads in increments of about 20% of the estimated safe load at each stage and applying the next increment after the rate of displacement is nearer to 0.1 mm. per 30 minutes till the total displacement becomes, 12 mm at the cutoff level including the cost of arranging the entire set-up, hire charges of all implements including at least two dial gauges, preparing the pile head if necessary, and removal of all arrangement after completion etc. complete in all respect including cost of carriage of all materials and as per IS specification and direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001122 | 2 | Each |
12 | 12 | Performing Vertical load test on single Pile in accordance with IS:2911(Part-IV) by hydraulic jacks on pile/piles with 1.5 times the design load including preparation of the head of piles with concrete of required strength for receiving the jacks with all ancillary arrangements for setting up gauges, construction of suitable platforms, keeping the loads and dismantling and removing all arrangement etc. complete as per IS specification and direction of Engineer-in-charge. Testing load up to 100 T. | BI01010001010000000000000515BI0100001123 | 2 | Each |
13 | 13 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powered or local sand. | BI01010001010000000000000515BI0100001124 | 105 | SQM |
14 | 14 | Cement concrete with graded stone ballast(40 mm size) excluding shuttering . With Pakur Variety 1:3:6 proportion In ground floor and foundation. | BI01010001010000000000000515BI0100001125 | 65.3 | CuM. |
15 | 15 | Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture]\nM 25 Grade. Pakur Variety. FOUNDATION & GROUND FLOOR | BI01010001010000000000000515BI0100001126 | 36.8 | CuM. |
16 | 16 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier]. In Ground Floor and Foundation. With approved concrete pump. FOUNDATION & GROUND FLOOR | BI01010001010000000000000515BI0100001127 | 189 | CuM. |
17 | 17 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier]. In Ground Floor and Foundation. With approved concrete pump.FIRST FLOOR | BI01010001010000000000000515BI0100001128 | 75 | CuM. |
18 | 18 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier]. In Ground Floor and Foundation. With approved concrete pump. SECOND FLOOR | BI01010001010000000000000515BI0100001129 | 80 | CuM. |
19 | 19 | Supplying ready mixed concrete of M 25 Grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu.m of wet concrete produced in computerised batching plant under controlled condition using approved super plastisizer, designing concrete mix following I.S. 10262 and I.S. 456, transporting the mix with agitation in transit mixer to work site depositing the mix on a platform erected for the purpose at required levels of concreting and then placing the mix in its final location of form work compacting and curing the same complete as per specification & direction of the Engineer-in-charge including computerised batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete but excluding cost of hire charge of platform and its supporting staging which would be paid through separate item. [cement to be supplied by the Manufacturer/ supplier]. In Ground Floor and Foundation. With approved concrete pump. THIRD FLOOR | BI01010001010000000000000515BI0100001130 | 18 | CuM. |
20 | 20 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof of GF 9 to 12 mm thick approved quality ply board shuttering in any concrete work. FOUNDATION & GROUND FLOOR | BI01010001010000000000000515BI0100001131 | 1295 | SqM. |
21 | 21 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof of GF 9 to 12 mm thick approved quality ply board shuttering in any concrete work. FIRST FLOOR | BI01010001010000000000000515BI0100001132 | 710 | SqM. |
22 | 22 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof of GF 9 to 12 mm thick approved quality ply board shuttering in any concrete work. SECOND FLOOR | BI01010001010000000000000515BI0100001133 | 710 | SqM. |
23 | 23 | Hire and labour charges for shuttering with centreing and necessary staging up to 4m using approved stout props thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, linteles curved or straight including fitting, fixing and striking out after complition of works upto roof of GF 9 to 12 mm thick approved quality ply board shuttering in any concrete work. THIRD FLOOR | BI01010001010000000000000515BI0100001134 | 140 | SqM. |
24 | 24 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. SAIL/ TATA/RINL. GROUND FLOOR | BI01010001010000000000000515BI0100001135 | 47 | M.T. |
25 | 25 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. SAIL/ TATA/RINL. FIRST FLOOR | BI01010001010000000000000515BI0100001136 | 8.1 | M.T. |
26 | 26 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. SAIL/ TATA/RINL. SECOND FLOOR | BI01010001010000000000000515BI0100001137 | 8.8 | M.T. |
27 | 27 | Reinforcement for reinforced concrete work in all sorts structure including distribution bars, stirrups, binders etc. including of rods initial straightening and removal of loose rust (if necessary), cutting to requisite length , hooking and bending with 16 gauge black annealed wire at every inter section, complete as per drawing and direction. SAIL/ TATA/RINL. THIRD FLOOR | BI01010001010000000000000515BI0100001138 | 2 | M.T. |
28 | 28 | Brick work with 1st class bricks in cement mortar (1:6). IN FOUNDATION AND PLINTH | BI01010001010000000000000515BI0100001139 | 88 | CuM. |
29 | 29 | Brick work with 1st class bricks in cement mortar (1:6). GROUND FLOOR | BI01010001010000000000000515BI0100001140 | 61 | CuM. |
30 | 30 | Brick work with 1st class bricks in cement mortar (1:6). FIRST FLOOR | BI01010001010000000000000515BI0100001141 | 46 | CuM. |
31 | 31 | Brick work with 1st class bricks in cement mortar (1:6). SECOND FLOOR | BI01010001010000000000000515BI0100001142 | 46 | CuM. |
32 | 32 | Brick work with 1st class bricks in cement mortar (1:6). THIRD FLOOR | BI01010001010000000000000515BI0100001143 | 21 | CuM. |
33 | 33 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in. GROUND FLOOR | BI01010001010000000000000515BI0100001144 | 938 | SqM |
34 | 34 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in. FIRST FLOOR | BI01010001010000000000000515BI0100001145 | 144.4 | SqM |
35 | 35 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)in. SECOND FLOOR | BI01010001010000000000000515BI0100001146 | 165 | SqM |
36 | 36 | 250 mm th. Autoclave aerated concrete block Work with size 625 mm x 250 mm x 125 mm- Grade-I, having drying Shrinkage less than 0.05% conforming to IS: 2185 (Part-3)-1984 made up of fly ash (conforming to IS: 3812-1981, with permissible loss on ignition upto 6% ), lime , cement and laid in Cement Mortar (1:6) complete in all respect as per direction & satisfaction of Engineer -in Charge . In Super Structure, Ground Floor. | BI01010001010000000000000515BI0100001147 | 21.5 | CuM. |
37 | 37 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). | BI01010001010000000000000515BI0100001148 | 30 | SqM |
38 | 38 | Labour for Chipping of concrete surface before taking up Plastering work. | BI01010001010000000000000515BI0100001149 | 1970 | Sqm |
39 | 39 | Supplying fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core so as to import monolitaheic composite structure as per approved technology of Departmant of Science (DST) to satisfy IS : 4020 door testing performance . 66mm X 90 mm | BI01010001010000000000000515BI0100001150 | 75 | Mtr. |
40 | 40 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.\n32 mm thick. GROUND FLOOR | BI01010001010000000000000515BI0100001151 | 7.5 | SqM |
41 | 41 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.\n32 mm thick. FIRST FLOOR | BI01010001010000000000000515BI0100001152 | 9.2 | SqM |
42 | 42 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.\n32 mm thick. SECOND FLOOR | BI01010001010000000000000515BI0100001153 | 1.85 | SqM |
43 | 43 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.\n32 mm thick. THIRD FLOOR | BI01010001010000000000000515BI0100001154 | 2.2 | SqM |
44 | 44 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\nSal : Malayasian. GROUND FLOOR | BI01010001010000000000000515BI0100001155 | 0.68 | Cu.M |
45 | 45 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\nSal : Malayasian. FIRST FLOOR | BI01010001010000000000000515BI0100001156 | 0.25 | Cu.M |
46 | 46 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\nSal : Malayasian. SECOND FLOOR | BI01010001010000000000000515BI0100001157 | 0.33 | Cu.M |
47 | 47 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wideeach and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneerscomplete, including fitting, fixing shutters inposition but excluding the cost of hinges andother fittings in ground floor.(a) 35 mm thick shutters (single leaf). GROUND FLOOR | BI01010001010000000000000515BI0100001158 | 15 | SqM |
48 | 48 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wideeach and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneerscomplete, including fitting, fixing shutters inposition but excluding the cost of hinges andother fittings in ground floor.(a) 35 mm thick shutters (single leaf).FIRST FLOOR | BI01010001010000000000000515BI0100001159 | 12.8 | SqM |
49 | 49 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wideeach and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneerscomplete, including fitting, fixing shutters inposition but excluding the cost of hinges andother fittings in ground floor.(a) 35 mm thick shutters (single leaf). SECOND FLOOR | BI01010001010000000000000515BI0100001160 | 15 | SqM |
50 | 50 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface].\n (ii) With 1:4 cement mortar, \nb) 10 mm thick plaster. Ceiling Plaster. GROUND FLOOR | BI01010001010000000000000515BI0100001161 | 255 | SqM |
51 | 51 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \n(ii) With 1:4 cement mortar, \nb) 10 mm thick plaster. Ceiling Plaster.\n FIRST FLOOR | BI01010001010000000000000515BI0100001162 | 255 | SqM |
52 | 52 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \n(ii) With 1:4 cement mortar, \nb) 10 mm thick plaster. Ceiling Plaster. \nSECOND FLOOR | BI01010001010000000000000515BI0100001163 | 265 | SqM |
53 | 53 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface].\n (ii) With 1:4 cement mortar,\n b) 10 mm thick plaster. Ceiling Plaster. \nTHIRD FLOOR AND MUMPTY ROOM | BI01010001010000000000000515BI0100001164 | 28 | SqM |
54 | 54 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \na) 20mm thick plaster.\n OUTSIDE. GROUND FLOOR | BI01010001010000000000000515BI0100001165 | 1180 | SqM |
55 | 55 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \na) 20mm thick plaster.\n FIRST FLOOR | BI01010001010000000000000515BI0100001166 | 275 | SqM |
56 | 56 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \na) 20mm thick plaster. \nSECOND FLOOR | BI01010001010000000000000515BI0100001167 | 275 | SqM |
57 | 57 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface].\nWith 6:1 cement mortar\n a) 20mm thick plaster.\n THIRD FLOOR AND MUMPTY ROOM | BI01010001010000000000000515BI0100001168 | 265 | SqM |
58 | 58 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \nb) 15mm thick plaster. \nINSIDE GROUND FLOOR | BI01010001010000000000000515BI0100001169 | 860 | SqM |
59 | 59 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \nb) 15mm thick plaster. \nINSIDE FIRST FLOOR | BI01010001010000000000000515BI0100001170 | 625 | SqM |
60 | 60 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar\n b) 15mm thick plaster. \nINSIDE. SECOND FLOOR | BI01010001010000000000000515BI0100001171 | 780 | SqM |
61 | 61 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]. \nWith 6:1 cement mortar \nb) 15mm thick plaster.\n INSIDE. THIRD FLOOR AND MUMPTY ROOM | BI01010001010000000000000515BI0100001172 | 90 | SqM |
62 | 62 | Neat Cement Punning above 1.5mm thick in Wall dado, Window Sill Floor and Drain etc Note Cement 0.152 cum 100 Sqmts. ALL FLOOR | BI01010001010000000000000515BI0100001173 | 190 | SqM |
63 | 63 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer.\nOne Coat, ALL FLOORS | BI01010001010000000000000515BI0100001174 | 3160 | SqM |
64 | 64 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :Standard Quality (Two coats) ALL FLOORS | BI01010001010000000000000515BI0100001175 | 3160 | SqM |
65 | 65 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) | BI01010001010000000000000515BI0100001176 | 3160 | SqM |
66 | 66 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. \nGROUND FLOOR. Two coats | BI01010001010000000000000515BI0100001177 | 2113 | SqM |
67 | 67 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. \nFIRST FLOOR . Two coats | BI01010001010000000000000515BI0100001178 | 275 | SqM |
68 | 68 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.\n SECOND FLOOR . Two coats | BI01010001010000000000000515BI0100001179 | 275 | SqM |
69 | 69 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. \nTHIRD FLOOR AND MUMPTY ROOM. \nTwo coats | BI01010001010000000000000515BI0100001180 | 265 | SqM |
70 | 70 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.a) Normal Acrylic Emulsion. \n GROUND (External surface ) \nTwo coats | BI01010001010000000000000515BI0100001181 | 2073 | SqM |
71 | 71 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffol. Two coatsding and all incidental charges but excluding the cost of primer.a) Normal Acrylic Emulsion. \nFIRST FLOOR. \nTwo coats | BI01010001010000000000000515BI0100001182 | 275 | SqM |
72 | 72 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.a) Normal Acrylic Emulsion.\n SECOND FLOOR. \n Two coats | BI01010001010000000000000515BI0100001183 | 275 | SqM |
73 | 73 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\na) Normal Acrylic Emulsion.\n THIRD FLOOR AND MUMPTY ROOM. \n Two coats | BI01010001010000000000000515BI0100001184 | 265 | SqM |
74 | 74 | Primming One coat on Timber or Plaster surface with Synthetic Oil bound Primer of approved Quality inclusing smooting surface by sand Papering etc | BI01010001010000000000000515BI0100001185 | 158 | SqM |
75 | 75 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | BI01010001010000000000000515BI0100001186 | 135 | SqM |
76 | 76 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : \nOn timber or plastered surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001187 | 158 | SqM |
77 | 77 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : iv) On Steel and other Metal Surface.With super gloss (hi-gloss). Two coat with any shade except white | BI01010001010000000000000515BI0100001188 | 135 | SqM |
78 | 78 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative at Wall. GROUND FLOOR | BI01010001010000000000000515BI0100001189 | 105 | SqM |
79 | 79 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative at Wall. FIRST FLOOR | BI01010001010000000000000515BI0100001190 | 105 | SqM |
80 | 80 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) WALL With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative at Wall. SECOND FLOOR | BI01010001010000000000000515BI0100001191 | 90 | SqM |
81 | 81 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N. GROUND FLOOR | BI01010001010000000000000515BI0100001192 | 28 | SqM |
82 | 82 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N.FIRST FLOOR | BI01010001010000000000000515BI0100001193 | 58 | SqM |
83 | 83 | Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N.. SECOND FLOOR | BI01010001010000000000000515BI0100001194 | 55 | SqM |
84 | 84 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) = 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick\ncement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of\nEngineer-in-Charge. (Note: This work should not be\nexecuted without specific permission of Superintending Engineer) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5\nmm thick). GROUND FLOOR | BI01010001010000000000000515BI0100001195 | 160 | SqM |
85 | 85 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) = 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (size not Iess than 600mmX 600 mm X 9.5 mm thick) FIRST FLOOR | BI01010001010000000000000515BI0100001196 | 142 | SqM |
86 | 86 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) = 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick\ncement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials,Iabour and all other incidental charges complete true to the manufacturer's specification and direction of\nEngineer-in-Charge. (Note: This work should not be\nexecuted without specific permission of Superintending Engineer)(size not Iess than 600mmX 600 mm X 9.5 mm thick). SECOND FLOOR | BI01010001010000000000000515BI0100001197 | 168 | SqM |
87 | 87 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing incement slurry with admixture of pigmentmatching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work.[Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] Extra cost of labour for prefinished and premoulded Nosing to treads of steps. GROUND FLOOR | BI01010001010000000000000515BI0100001198 | 90 | SqM |
88 | 88 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing incement slurry with admixture of pigmentmatching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work.[Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] FIRST FLOOR | BI01010001010000000000000515BI0100001199 | 25 | SqM |
89 | 89 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing incement slurry with admixture of pigmentmatching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work.[Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] SECOND FLOOR | BI01010001010000000000000515BI0100001200 | 25 | SqM |
90 | 90 | 18 mm. to 22 mm. thick, kota stone slab setting 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing incement slurry with admixture of pigmentmatching the stone shade, including grinding & polishing as per direction of Engineer - in -charge to match with the existing work.[Slurry for bedding @ 4.4 kg/Sq.m andpointing @2.0 kg/Sq.m] . THIRD FLOOR | BI01010001010000000000000515BI0100001201 | 8 | SqM |
91 | 91 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shade including grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. GROUND FLOOR | BI01010001010000000000000515BI0100001202 | 30 | SqM |
92 | 92 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shade including grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. FIRST FLOOR | BI01010001010000000000000515BI0100001203 | 10 | SqM |
93 | 93 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shade including grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. SECOND FLOOR | BI01010001010000000000000515BI0100001204 | 10 | SqM |
94 | 94 | Supplying, fitting and fixing 18 mm. to 22mm. thick kota stone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) includingmaking suitable arrangement to hold thestone properly by brass / copper hooksincluding pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture ofpigments matching the stone shade including grinding and polishing all completeas per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m]. THIRD FLOOR | BI01010001010000000000000515BI0100001205 | 2.4 | SqM |
95 | 95 | Extra cost of labour for pre finish and pre moulded nosing to treads of steps,railing,window sil etc of kota stone. | BI01010001010000000000000515BI0100001206 | 135 | RM |
96 | 96 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick. GROUND FLOOR | BI01010001010000000000000515BI0100001207 | 3 | SqM |
97 | 97 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick. FIRST FLOOR | BI01010001010000000000000515BI0100001208 | 2.1 | SqM |
98 | 98 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor.3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick. SECOND FLOOR | BI01010001010000000000000515BI0100001209 | 2.1 | SqM |
99 | 99 | Supplying, fitting and fixing windows and ventilators with or with out integrated grills conforming to IS 1038 - 1975 and manufactured from rolled steel sections conforming to IS 7452 - 1974 with non -friction projecting type ,box type hinges , glazing clips ,lugs locking bracket , handle plat etc, including hoisting in position , straightening if required , fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Fixed type steel windows as per IS Sizes with horizontal glazing bars. GROUND FLOOR | BI01010001010000000000000515BI0100001210 | 7.5 | SqM |
100 | 100 | Supplying, fitting and fixing windows and ventilators with or with out integrated grills conforming to IS 1038 - 1975 and manufactured from rolled steel sections conforming to IS 7452 - 1974 with non -friction projecting type ,box type hinges , glazing clips ,lugs locking bracket , handle plat etc, including hoisting in position , straightening if required , fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Fixed type steel windows as per IS Sizes with horizontal glazing bars. FIRST FLOOR | BI01010001010000000000000515BI0100001211 | 7.45 | SqM |
101 | 101 | Supplying, fitting and fixing windows and ventilators with or with out integrated grills conforming to IS 1038 - 1975 and manufactured from rolled steel sections conforming to IS 7452 - 1974 with non -friction projecting type ,box type hinges , glazing clips ,lugs locking bracket , handle plat etc, including hoisting in position , straightening if required , fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Fixed type steel windows as per IS Sizes with horizontal glazing bars. SECOND FLOOR | BI01010001010000000000000515BI0100001212 | 7.45 | SqM |
102 | 102 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) i) 4mm thick.All Floor | BI01010001010000000000000515BI0100001213 | 24 | SqM |
103 | 103 | Extra for fixing glass panes in steel window. | BI01010001010000000000000515BI0100001214 | 24 | SqM |
104 | 104 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium slidingWindow of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film. Natural white. For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. | BI01010001010000000000000515BI0100001215 | 198 | Kg |
105 | 105 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4mm thick coloured / tinted / smoke glass. | BI01010001010000000000000515BI0100001216 | 30 | SqM |
106 | 106 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6mm thick coloured / tinted / smoke glass. | BI01010001010000000000000515BI0100001217 | 58 | SqM |
107 | 107 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge. For sliding windows. U' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001218 | 190 | Mtr. |
108 | 108 | Supplying maruti lock (100mm) | BI01010001010000000000000515BI0100001219 | 32 | Pair |
109 | 109 | Supplying PVC rollers for sliding windows as per direction of Engineer\nin charge. | BI01010001010000000000000515BI0100001220 | 48 | Each |
110 | 110 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Door frame. (Top & sides). | BI01010001010000000000000515BI0100001221 | 82 | Mtr. |
111 | 111 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Shutter : Top rail. | BI01010001010000000000000515BI0100001222 | 20 | Mtr. |
112 | 112 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Shutter : Bottom rail. | BI01010001010000000000000515BI0100001223 | 20 | Mtr. |
113 | 113 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Shutter : Lock rail | BI01010001010000000000000515BI0100001224 | 20 | Mtr. |
114 | 114 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Shutter : Door vertical. | BI01010001010000000000000515BI0100001225 | 84 | Mtr. |
115 | 115 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). Movable door shutter. Shutter : Glazing clip. | BI01010001010000000000000515BI0100001226 | 260 | Mtr. |
116 | 116 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixingglass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. 3 /4 track sliding window. | BI01010001010000000000000515BI0100001227 | 30 | SqM |
117 | 117 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking rangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded alumium sections, glass, panel boards neoprene / EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt, glazing clips etc. (10% rate reduction has to be made for swing doors or partitions where floor sping is not used. 10% enhancement of rate is to be made where door frame of extruded aluminium sections has to be fitted and fixed to masonry wall. 5% rate enhencement may be allowed for double leaf swing door. Payment shall be made for the shutter area only exept where door frame is fixed the entire opening shall be taken to consideration.Payment for door frame\nsections are to be paid seperately). | BI01010001010000000000000515BI0100001228 | 52 | SqM |
118 | 118 | 12mm thick cleared toughened glass coforming to IS: 2553-1992 (Part-II) | BI01010001010000000000000515BI0100001229 | 6.2 | SqM |
119 | 119 | Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001230 | 2 | Each set |
120 | 120 | Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not used). | BI01010001010000000000000515BI0100001231 | 2 | pair |
121 | 121 | a) M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. Mtr . GROUND FLOOR | BI01010001010000000000000515BI0100001232 | 5.8 | Qntl |
122 | 122 | a) M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. Mtr . FIRST FLOOR | BI01010001010000000000000515BI0100001233 | 5.6 | Qntl |
123 | 123 | a) M.S. or W.I. Ornamental grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 16 Kg./sq. Mtr . SECOND FLOOR | BI01010001010000000000000515BI0100001234 | 5.6 | Qntl |
124 | 124 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. IN GROUND FLOOR | BI01010001010000000000000515BI0100001235 | 14 | SqM |
125 | 125 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). 40mm X 6mm, 250mm Length | BI01010001010000000000000515BI0100001236 | 42 | Each |
126 | 126 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately). 40mm X 6mm, 125mm Length | BI01010001010000000000000515BI0100001237 | 150 | Each |
127 | 127 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark . 100mm X 50mm X 1.25mm | BI01010001010000000000000515BI0100001238 | 80 | Each |
128 | 128 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark . 75mm X 47mm X 1.70mm | BI01010001010000000000000515BI0100001239 | 30 | Each |
129 | 129 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. 250mm long | BI01010001010000000000000515BI0100001240 | 42 | Each |
130 | 130 | Anodised aluminium floor door stopper\n | BI01010001010000000000000515BI0100001241 | 10 | Each |
131 | 131 | Anodised aluminium barrel / tower /socket bolt (full covered) of approved manufractured from extructed section conforming to I.S. 204/74 fitted with cadmium plated screws. 150 mm long X 10mm dia bolt. | BI01010001010000000000000515BI0100001242 | 20 | Each |
132 | 132 | Anodised aluminium barrel / tower /socket bolt (full covered) of approved manufractured from extructed section conforming to I.S. 204/74 fitted with cadmium plated screws. 300 mm long X 10mm dia bolt. | BI01010001010000000000000515BI0100001243 | 85 | Each |
133 | 133 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal / Round rod). 125 mm grip x 12 mm dia rod. | BI01010001010000000000000515BI0100001244 | 24 | Each |
134 | 134 | Godrej Hydraulic door closer fitted and fixed complete.(b) Medium type | BI01010001010000000000000515BI0100001245 | 20 | Each |
135 | 135 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers includin fitting & fixing complete. | BI01010001010000000000000515BI0100001246 | 12 | Each |
136 | 136 | Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required) | BI01010001010000000000000515BI0100001247 | 409 | SqM |
137 | 137 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety | BI01010001010000000000000515BI0100001248 | 27.5 | CuM. |
138 | 138 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m | BI01010001010000000000000515BI0100001249 | 0.56 | MT |
139 | 139 | Plumbing & Sanitary. Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made. (a) For Exposed Work -- PVC Pipes (Dia). 50 mm | BI01010001010000000000000515BI0100001250 | 30 | Mtr. |
140 | 140 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made. (a) For Exposed Work -- PVC Pipes (Dia). 32mm | BI01010001010000000000000515BI0100001251 | 60 | Mts |
141 | 141 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made. (a) For Exposed Work -- PVC Pipes (Dia). 25 mm | BI01010001010000000000000515BI0100001252 | 35 | Mtr. |
142 | 142 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made.(b) For Concealed work. 15 mm | BI01010001010000000000000515BI0100001253 | 130 | Mtr. |
143 | 143 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made. (b) For Concealed work. 20 mm | BI01010001010000000000000515BI0100001254 | 85 | Mtr. |
144 | 144 | Supplying, fitting and fixing PVC pipes of approved makeof (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) Supreem made. (b) For Concealed work. 25 mm | BI01010001010000000000000515BI0100001255 | 30 | Mtr. |
145 | 145 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 40mm | BI01010001010000000000000515BI0100001256 | 4 | Each |
146 | 146 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 32 mm | BI01010001010000000000000515BI0100001257 | 20 | Each |
147 | 147 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 25 mm | BI01010001010000000000000515BI0100001258 | 25 | Each |
148 | 148 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap | BI01010001010000000000000515BI0100001259 | 10 | Each |
149 | 149 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.E.W.C. Plastic (hallow type) white | BI01010001010000000000000515BI0100001260 | 10 | Each |
150 | 150 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.White | BI01010001010000000000000515BI0100001261 | 10 | Each |
151 | 151 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(ii) 450 mm X 300 mm size | BI01010001010000000000000515BI0100001262 | 15 | Each |
152 | 152 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) | BI01010001010000000000000515BI0100001263 | 15 | Each |
153 | 153 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only \n(ii) 630X550X180 mm | BI01010001010000000000000515BI0100001264 | 6 | Each |
154 | 154 | Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe. | BI01010001010000000000000515BI0100001265 | 10 | Each |
155 | 155 | Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with coupling at one end fitted with necessary clamps. 1050 mm long | BI01010001010000000000000515BI0100001266 | 23 | Each |
156 | 156 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iv) 750 mm long | BI01010001010000000000000515BI0100001267 | 16 | Each |
157 | 157 | Supplying ,fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510 & 510 (A) Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001268 | 8 | Each |
158 | 158 | Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). | BI01010001010000000000000515BI0100001269 | 10 | Each |
159 | 159 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). | BI01010001010000000000000515BI0100001270 | 18 | Each |
160 | 160 | Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). | BI01010001010000000000000515BI0100001271 | 10 | Each |
161 | 161 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.i) 635 mm X 395 mm X 420 mm | BI01010001010000000000000515BI0100001272 | 2 | Each |
162 | 162 | Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect. | BI01010001010000000000000515BI0100001273 | 2 | Each |
163 | 163 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.(a) C.P. urinal flush pipe fittings range of one | BI01010001010000000000000515BI0100001274 | 3 | Each |
164 | 164 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm | BI01010001010000000000000515BI0100001275 | 10 | Each |
165 | 165 | Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar\nor similar brand). | BI01010001010000000000000515BI0100001276 | 10 | Each |
166 | 166 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). | BI01010001010000000000000515BI0100001277 | 10 | Each |
167 | 167 | Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm dia. and 600 mm long | BI01010001010000000000000515BI0100001278 | 20 | Each |
168 | 168 | Suppling fitting fixing liquid soap container b) PTMT (Prayag or Equivelent) | BI01010001010000000000000515BI0100001279 | 10 | Each |
169 | 169 | Suppling fitting fixing soap holder a) PTMT (Prayag or Equivelent) | BI01010001010000000000000515BI0100001280 | 12 | Each |
170 | 170 | Supplying fitting fixing PTMT smart shelf of approved make of size 300 mm | BI01010001010000000000000515BI0100001281 | 12 | Each |
171 | 171 | Supplying, fitting and fixing C.I. round grating. (ii) 150 mm dia | BI01010001010000000000000515BI0100001282 | 19 | Each |
172 | 172 | Supplying, fitting and fixing C.I. square jalli. (ii) 150 mm | BI01010001010000000000000515BI0100001283 | 10 | Each |
173 | 173 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. b) 110 mm | BI01010001010000000000000515BI0100001284 | 145 | Mtr. |
174 | 174 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (i) Door Tee (110 mm) | BI01010001010000000000000515BI0100001285 | 20 | Each |
175 | 175 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (ii) Door Y (LH) & (RH).(110 MM) | BI01010001010000000000000515BI0100001286 | 18 | Each |
176 | 176 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (iii) Door Bend T.S 110 mm | BI01010001010000000000000515BI0100001287 | 15 | Each |
177 | 177 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (iv) Plain Tee 110 mm | BI01010001010000000000000515BI0100001288 | 18 | Each |
178 | 178 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (v)Bend 45 Degree 110 mm | BI01010001010000000000000515BI0100001289 | 12 | Each |
179 | 179 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (vi) Pipe Clip 110 mm | BI01010001010000000000000515BI0100001290 | 144 | Each |
180 | 180 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. c) 160 mm | BI01010001010000000000000515BI0100001291 | 65 | metre |
181 | 181 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (i) Door Tee (160 mm) | BI01010001010000000000000515BI0100001292 | 12 | Each |
182 | 182 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (ii) Door Bend T S.(160 MM) | BI01010001010000000000000515BI0100001293 | 18 | Each |
183 | 183 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length.(iv) Plain Tee (160 mm) | BI01010001010000000000000515BI0100001294 | 18 | Each |
184 | 184 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (v) Bend 87.5 Degree (160 mm) | BI01010001010000000000000515BI0100001295 | 20 | Each |
185 | 185 | Supply of UPVC pipes (B Type) and fittings conforming to IS-13592-1992. (A) (i) Single Socketed 3 Mtr. Length. (vi) Pipe Clip 160 mm | BI01010001010000000000000515BI0100001296 | 75 | Each |
186 | 186 | Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials). (A) Above ground (ii) 110 mm | BI01010001010000000000000515BI0100001297 | 145 | Mtr. |
187 | 187 | Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials). (A) Above ground (iii) 160 mm | BI01010001010000000000000515BI0100001298 | 20 | Mtr. |
188 | 188 | Labour for fitting and fixing U.P.V.C pipes for above ground work including cost of joining materials etc. fitting and fixing all necessary specials, cutting pipes,cutting holes in walls or R.C floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 mtr. and refilling the same complete as per direction of the Engineer - in - Charge.(payment will be made on centre line measurment of the total pipe line including specials). (B) Below Ground. (iii) 160 mm | BI01010001010000000000000515BI0100001299 | 45 | Mtr. |
189 | 189 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer 2000 litre capacity | BI01010001010000000000000515BI0100001300 | 2 | Each |
190 | 190 | Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. litre capacity. | BI01010001010000000000000515BI0100001301 | 2 | Each |
191 | 191 | Labour for punching hole in plastic water storage tank upto 50 mm dia | BI01010001010000000000000515BI0100001302 | 8 | Each |
192 | 192 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external\nsurfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. With Pakur variety. (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001303 | 12 | Each |
193 | 193 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. With Pakur variety. (SAIL/TATA/RINL). For 30 users. | BI01010001010000000000000515BI0100001304 | 1 | Each |
194 | 194 | Box cutting or filling in Road embankment in all sorts of soil including spreading the spoils properly over the flank as necessary or on berm to approximate grade & camber and rolling the sub-grade with power roller to proper camber and grade as per direction and satisfaction of Engineer-in-charge including uprooting and removing plants and jungles when and where necessary. Depth up to 300mm. | BI01010001010000000000000515BI0100001305 | 525 | SqM |
195 | 195 | Construction of granular sub-base by providing graded material, mixing by mix in place method with Rotavator at OMC, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants including cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).(ii) Grading – II | BI01010001010000000000000515BI0100001306 | 105 | CuM. |
196 | 196 | 60 mm thick interlocking designer concrete paver block M- 35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.(ii) Coloured Decorative | BI01010001010000000000000515BI0100001307 | 220 | Sqm |
197 | 197 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 of Specifications for Road & BridgeWorks of MoRT&H (5th Revision). (The rate is inclusive of cost of all materials, labour, hire and usage charges of machinery and all incidental charges in this connection.)A) Using Concrete Mixer | BI01010001010000000000000515BI0100001308 | 215 | Mtr. |
198 | 198 | Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) | BI01010001010000000000000515BI0100001309 | 250 | SqM |
199 | 199 | Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 ( 8 parts of stacked volume of earth after reduction by 20%, one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary watering and finally fine dressing, levelling etc., including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50m lift upto 1.5m complete. This includes supply of labour, tools & plants including materials. Planting hedge plants in two rows at 30cm apart | BI01010001010000000000000515BI0100001310 | 60 | SqM |
200 | 200 | ELECTRICAL WORKS(Part -A ) Scheduled item. \nSupply & Fixing 415V 125A TPN (LT) switch in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall incl. earthing attachment.(Pwd page-D3 Item no. 4 (a) | BI01010001010000000000000515BI0100001311 | 1 | set |
201 | 201 | Supply & Fixing 415V 63A TPN (LT) switch in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall incl. earthing attachment.(Pwd page-D3 Item no. 4 (a) | BI01010001010000000000000515BI0100001312 | 2 | set |
202 | 202 | Supply & Fixing 415V 125A Four pole on load change over switch in suitable SS enclosure (Make L&T) on angle iron frame on wall incl. earthing attachment.(Pwd page-D2 Item no. 3 (a)) | BI01010001010000000000000515BI0100001313 | 1 | set |
203 | 203 | Supply & Fixing 415V 32 A TPN (LT) switch in suitable SS enclosure with HRC fuses on LS & NL on angle iron frame on wall incl. earthing attachment.(pump )(Pwd page-D3 Item no. 4 (a) | BI01010001010000000000000515BI0100001314 | 1 | set |
204 | 204 | Supplying & fixing 415V 315A sheet metal (16 SWG) Iron Clad Busbar chambers of on angle iron frame on wall, incl. earthing attachment and painting as required ( CU. BAR BOX-500 X 150 MM. CU BAR- 40 X 4MM(4 BAR)(Pwd page-D13 Item no. 19 (b) | BI01010001010000000000000515BI0100001315 | 0.8 | mtr |
205 | 205 | Supply & fixing of 240V 32A DP MCB (Legrand) in DP SS enclosure (Legrand) incl earthing attachment. ( FOR ROOF LIGHTING )(Pwd page-D6,9 Item no.7;11) | BI01010001010000000000000515BI0100001316 | 5 | set |
206 | 206 | Supply & fixing double door 4 way Vertical TPN MCB DB (Legrand) with IP 42/43 protection SS enclosure ressed in wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire, neutral link & earthing attachment comprising of the following accessories (Pwd page-D 6;8;11 Item no. 10) \na) 100A Four pole thermal magnetic MCCB- 1 no (25 KA/35KA)\nb) 63A TP MCB ---2 nos\nc)16 A to 32A SP MCB --- 6 nos | BI01010001010000000000000515BI0100001317 | 1 | set |
207 | 207 | Supply & fixing way double door Horizontal 6 wayTPNMCB DB (legrand ) concealed in wall incl inter connection with suitable copper wire, neutral link & earthing attachment comprising of the followings (All Legrand)(Pwd page-D 6;5 Item no. 7;6) (3nos EMR & 1 no normal)\na) 100A four pole MCB isolater --- 1 no\nb) 16 to 32A (as reqd.) SP MCB --- 18 nos | BI01010001010000000000000515BI0100001318 | 2 | set |
208 | 208 | Supply & Fixing (2+8) way SPN MCBDB (Legrand ) with IP-42/43 protection Concealed in wall & mending good the damages to original finish incl. Interconnection with suitable copper wire & nuetral link incl. earthing attachment comprising with the following (All Legrand):(Pwd page-D 6;9 Item no. 7,13)(4nos EMR)\na) 40A DP MCB isolator & necy. connection --- 1 no\nb) 6 to 16A SP MCB as required breaking capacity \n 10KA & C characteristic ---- 8 nos | BI01010001010000000000000515BI0100001319 | 7 | set |
209 | 209 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed(Pwd page-F2 Item no. 1 (a) 4 x 35 sq mm | BI01010001010000000000000515BI0100001320 | 50 | mtr |
210 | 210 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed(Pwd page-F2 Item no. 1 (a) 4 x 16 sq mm | BI01010001010000000000000515BI0100001321 | 40 | mtr |
211 | 211 | Laying of the following Alu. armoured cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed(Pwd page-F2 Item no. 1 (a) 2 x 6 sq mm | BI01010001010000000000000515BI0100001322 | 180 | mtr |
212 | 212 | Laying of the following XLPE Al armoured cable after cutting floor /pavement / wall and making holes incl, embedding tha cable at an average depth as below & mending good the damages to original finish:-(Pwd page-F 3 Item no. 5) 2 x6 sq mm | BI01010001010000000000000515BI0100001323 | 40 | mtr |
213 | 213 | Supply & laying medium gauge G.I.Pipe(ISI-Medium) for cable protection (Pwd page-F6 Item no. 11) \n 40 mm dia | BI01010001010000000000000515BI0100001324 | 80 | mtr |
214 | 214 | Supply & laying medium gauge G.I.Pipe(ISI-Medium) for cable protection (Pwd page-F6 Item no. 11) \n 80 mm dia for pole | BI01010001010000000000000515BI0100001325 | 20 | mtr |
215 | 215 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable:(Pwd page-F 4;5 Item no.7;8) 4 x 35 sq mm | BI01010001010000000000000515BI0100001326 | 6 | set |
216 | 216 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable:(Pwd page-F 4;5 Item no.7;8) 4 x 16 sq mm | BI01010001010000000000000515BI0100001327 | 6 | set |
217 | 217 | Supply & fixing compression type gland with brass gland brass ring incl. socketing the ends off by crimping method incl. S/F solderless socket (Dowels make) & jointing ,materials etc. Of the following XLPE/A cable:(Pwd page-F 4;5 Item no.7;8) 2 x 6 sq mm | BI01010001010000000000000515BI0100001328 | 12 | set |
218 | 218 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (brand appr by EIC) of the following sizes through alkathene pipe recessed in wall. (Pwd page-E9 Item no. 1 & E3) 4x10+2x6 sq mm though 25mm Alka Pipe(VTPN TO TPN ) | BI01010001010000000000000515BI0100001329 | 20 | mtr |
219 | 219 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (brand appr by EIC) of the following sizes through alkathene pipe recessed in wall. (Pwd page-E9 Item no. 1) 4x6+2x4 sqmm though 25mm Alka Pipe for | BI01010001010000000000000515BI0100001330 | 50 | mtr |
220 | 220 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (brand appr by EIC) of the following sizes through alkathene pipe recessed in wall. (Pwd page-E9 Item no. 1) 2x4+1x2.5 sq mm though 25mm Alka Pipe(SPNDB & AC ) | BI01010001010000000000000515BI0100001331 | 120 | mtr |
221 | 221 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (brand appr by EIC) of the following sizes through alkathene pipe recessed in wall. (Pwd page-E9 Item no. 1) 2x2.5+1x1.5 sqmm through 19mm Alka.pipe ( P/P) | BI01010001010000000000000515BI0100001332 | 250 | mtr |
222 | 222 | Supply & drawing of 1.1 Kv grade single core stranded 'FR' Pvc insulated & unsheathed copper wire (brand appr by EIC) of the following sizes through alkathene pipe recessed in wall. (Pwd page-E9 Item no. 1) \n3x1.5 sq mm through 19mm Alkathene pipe | BI01010001010000000000000515BI0100001333 | 100 | mtr |
223 | 223 | Distn. wiring in 3 x 1.5 sqmm single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/ fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish (Avg 9 mtr):(Pwd page-E20 Item no.1) | BI01010001010000000000000515BI0100001334 | 316 | Pts |
224 | 224 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq mm single core stranded 'FR' PVC insulated & unsheathed copper wire (brand approved by EIC) in 19mm bore, 3mm thickpolythene pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240V 6A 3 pin modular type plug socket & modular type switch(Brand appr. by EIC) incl. S&F earth continuity wire fixed on 4 module GI switch board with 3/4 module top cover plate flushed in wall incl mending good damage to original finish. (on board)(Pwd page-E20 Item no.3) | BI01010001010000000000000515BI0100001335 | 35 | Pts |
225 | 225 | Distribution wiring in 1.1 KV grade 3 x 1.5 sq mm single core stranded 'FR' PVC insulated & unsheathed copper wire (brand approved by EIC) in 19mm bore, 3mm thickpolythene pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240V 6A 3 pin modular type plug socket & modular type switch(Brand appr. by EIC) incl. S&F earth continuity wire fixed on 4 module GI switch board with 3/4 module top cover plate flushed in wall incl mending good damage to original finish. (Ave run 4.5 mtr)(Pwd page-E20 Item no.3) | BI01010001010000000000000515BI0100001336 | 10 | Pts |
226 | 226 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light points with 2 no. 2 way Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish.(Average run 9mtr)(Pwd page no E-24,item no-2.a) | BI01010001010000000000000515BI0100001337 | 12 | Pts |
227 | 227 | Supply & fixing of Modular type computer plug board of 8module GI box with cover plate recessed in wall comprising of the following(All cabtree): \na) 16A socket ---1 set b) 16 a switch --- 2 set\nb) 6A socket --- 2 sets | BI01010001010000000000000515BI0100001338 | 18 | set |
228 | 228 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu\nwire and earth continuity wire etc(Pwd page-E19 Item no.17) | BI01010001010000000000000515BI0100001339 | 10 | set |
229 | 229 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wirE (AC)(Pwd page-E17 Item no.5(a)\n | BI01010001010000000000000515BI0100001340 | 10 | set |
230 | 230 | Supply & fixing of Modular type 16A 3 pin modular type plug socket (Brand approved by EIC) with 16 A Modular type switch without plug top on of 4 module GI box with cover plate recessed in wall comprising of the following (All cabtree): (Pwd page-E18 Item no.9(b) a) 16A switch ---1 set \nb)16A socket - - 1 set | BI01010001010000000000000515BI0100001341 | 17 | set |
231 | 231 | Fixing only singal / twin fluorescent light complete with all accessories directly on wall/ceilinh/HW round block and suitable size of MS fastener,ceiling plate, nipples etc. as required(Pwd page-C 2 Item no.14(D) | BI01010001010000000000000515BI0100001342 | 74 | set |
232 | 232 | Supply & Fixing louver AL shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as following diameter(Pwd page-D14 Item no.32(a) \n 9" Exhaust fan(23cm) | BI01010001010000000000000515BI0100001343 | 17 | each |
233 | 233 | Supply & Fixing louver AL shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as following diameter(Pwd page-D14 Item no.32(a) \n12" Exhaust fan(30cm) | BI01010001010000000000000515BI0100001344 | 2 | each |
234 | 234 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:(Pwd page-c4 Item no.28) 9" Exhaust fan(23cm) | BI01010001010000000000000515BI0100001345 | 17 | each |
235 | 235 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:(Pwd page-c4 Item no.28) \n 12" Exhaust fan(30cm) | BI01010001010000000000000515BI0100001346 | 2 | each |
236 | 236 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering tha box(Pwd page-D14 Item no.31) | BI01010001010000000000000515BI0100001347 | 58 | set |
237 | 237 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.(Pwd page-E18 Item no.10) | BI01010001010000000000000515BI0100001348 | 58 | each |
238 | 238 | Erection of up to9.00 m ST bend pole with sole plate in CC foundation (600x600x150mm) thick CC (4:2:1) base block below sole plate with hard jhama metal incl CC (6:3:1) muffing 0.30 m dia 03.0 m above ground level incl 3mm thick neat cemented finish and GI earth bolt after making drilled hole on pole for earth bolt & carriage upto 1.6 Km from store to work site in cluding filling up the the exacavated earth pit with shifted soil.(pwd page H-1, Item No-1) | BI01010001010000000000000515BI0100001349 | 12 | set |
239 | 239 | Painting the up to 9.00 m ST pole with two coats of aluminium paint of approved make over one coat of R.O primer incl preparation of surface by sand paper/emery incl cleaning etc. For receving fresh coat of paint.(Pwd page-h-2,Item no-4) 1st coat of aluminium paint over 1 coat of RO priming & 2nd coat of aluminium paint over 1st coat) | BI01010001010000000000000515BI0100001350 | 12 | item |
240 | 240 | Earthing the the Installation by 50 mm dia G.I. Pipe (ISI -M) 3.64 mtr long & 1x4 SWG G.I.(Hot dip) wire (4 mtr long) with suitable nuts, bolts & washer etc. Incl S/F 15 mm dia GI protection pipe (1 mtr long) to be filled with bitumen partly under ground level & partly under ground level driven to an depth of 3.65 mtr below the ground level. .(Pwd page-G 1 Item no.2(a) | BI01010001010000000000000515BI0100001351 | 8 | set |
241 | 241 | S & F earth busbar of galvanized (Hot Dip) MS flat 25mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (Pwd page-G 2 Item no.4(a) | BI01010001010000000000000515BI0100001352 | 3 | mtr |
242 | 242 | S&F GI waterproof type looping cable box size 200x15x100 mm deep having 4 mm thick comprising of one 250 v 15 A kit-kat fuse unit, one NL on procelain insulator. One compression type brass cable gland for upto 2 core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machane screws etc. earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick. MS claps with bolts, nuts etc. including painting with anticorrosive paint(Pwd page-H 5 Item no.5) | BI01010001010000000000000515BI0100001353 | 10 | each |
243 | 243 | Fixing only outdoor / street light type light fitting complete with all accessories to be fixed/projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting(Pwd page-C3 Item no.19)(10 nos for poles and 10 nos for buliding) | BI01010001010000000000000515BI0100001354 | 22 | each |
244 | 244 | Electrical work NON Scheduled item Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable(make Brand approved by EIC) 4 x 35 sq mm | BI01010001010000000000000515BI0100001355 | 50 | mtr |
245 | 245 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable(make Brand approved by EIC 4 x 16 sq mm | BI01010001010000000000000515BI0100001356 | 40 | mtr |
246 | 246 | Supply & delevery of 1.1 Kv grade XLPE Aluminium armoured cable(make Brand approved by EIC 2 x 6 sq mm | BI01010001010000000000000515BI0100001357 | 220 | mtr |
247 | 247 | Supply of Ceiling Fan(make Brand approved by EIC) complete with all acessaries copper flex wire. 1200mm sweep | BI01010001010000000000000515BI0100001358 | 50 | set |
248 | 248 | Supply of Ceiling Fan(make Brand approved by EIC) complete with all acessaries copper flex wire. 1400mm sweep fan | BI01010001010000000000000515BI0100001359 | 8 | set |
249 | 249 | Supply of the following Heavy duty Exhaust Fan mening good the damages make(make- EPC / Orinet ) 9" Exhaust fan(230 mm) | BI01010001010000000000000515BI0100001360 | 17 | set |
250 | 250 | Supply of the following Heavy duty Exhaust Fan mening good the damages make(make- EPC / Orinet ) 12" sweep exhaust fan(300 mm) | BI01010001010000000000000515BI0100001361 | 2 | set |
251 | 251 | S/F 9W LED Lamp (make -(make Brand approved by EIC) ) on batten light on round block on wall / ceiling | BI01010001010000000000000515BI0100001362 | 10 | set |
252 | 252 | Supply and delivery of LED recessed full open 2x2 Tile, glare free uniform illumination (make Brand approved by EIC) | BI01010001010000000000000515BI0100001363 | 18 | set |
253 | 253 | Supply of 1ft 7 watt sleek LED mirror light with Extruded aluminium body, PMMA diffuser giving glare free illumination & smooth light distribution, & pre-wired with high effiency electronic driver, System Lumens > 525, IP 20 or better(make Brand approved by EIC) | BI01010001010000000000000515BI0100001364 | 13 | set |
254 | 254 | Supply of 12 watt Round Surface LED flat Panel with Die Cast Aluminium Heat Sink, white PMMA diffuser for uniform light distribution, High efficiency driver and 2KV Surge Protection, IP 20, Class I(make Brand approved by EIC) | BI01010001010000000000000515BI0100001365 | 36 | set |
255 | 255 | Supply of 18 watt Round Surface LED flat Panel with Die Cast Aluminium Heat Sink, white PMMA diffuser for uniform light distribution, High efficiency driver and 2KV Surge Protection, IP 20, Class I(make Brand approved by EIC) | BI01010001010000000000000515BI0100001366 | 68 | set |
256 | 256 | Supply & fixing Bulk Head light fitting with LED lamp (make Brand approved by EIC) | BI01010001010000000000000515BI0100001367 | 8 | set |
257 | 257 | Supply and delivery of 4' single LED type tube light fitting complete with all acessaries directly on ceiling with HW round block & suitable size of MS fastener (make Brand approved by EIC) | BI01010001010000000000000515BI0100001368 | 69 | set |
258 | 258 | Supply and delivery of 4' twin LED type tube light fitting complete with all acessaries directly on ceiling with HW round block & suitable size of MS fastener (make Brand approved by EIC) | BI01010001010000000000000515BI0100001369 | 5 | set |
259 | 259 | New LED spot lighting and design configuration to ensure consistent colour point within a lighting application. Availabl in black and wite colour option in 5700k (make Brand approved by EIC) | BI01010001010000000000000515BI0100001370 | 6 | set |
260 | 260 | Gate lighting decorative post top 360 degree indirect light with IP 65 protection.Resistant to impact and corrosion. (make Brand approved by EIC) | BI01010001010000000000000515BI0100001371 | 2 | set |
261 | 261 | Supply and delivery of 72 W LED STREET LIGHT (make Brand approved by EIC) | BI01010001010000000000000515BI0100001372 | 16 | set |
262 | 262 | Supply and delivery of 45 W LED STREET LIGHT (make Brand approved by EIC) | BI01010001010000000000000515BI0100001373 | 4 | set |
263 | 263 | Graden light IP 66 prtection LED pressure die cast power coated housing with PC diffuser. | BI01010001010000000000000515BI0100001374 | 4 | set |
264 | 264 | Supply & fixing of 3 Phase kWh Trivector Meter Class 1 whole current meter Energy Meter (LT) (model ER300P Class 1 cat no-WR300BC7300) description (3Ph, 4W TVM 240 V 10 - 60A BM ) to be fixed on board (Office-1, Residence-1) | BI01010001010000000000000515BI0100001375 | 1 | nos |
265 | 265 | SUPPLY & INSTALLATION OF AC MACHINES Supplying 2.0 TR/6000 Kcal/hr High Wall 3 star rated Non inverter split unit.(free 3 mtr refrigerant piping) Make HITACHI, model number-RMZ324 HCDO Non Inverter R-32 with rotary type compressor with copper condensor , rated power supply 230/50/1 Volts/Hz/Phase.One complete set | BI01010001010000000000000515BI0100001376 | 8 | set |
266 | 266 | Supplying & erecting soft drawn copper pipe suitable for\nrefrigeration system having 22 SWG thickness and innerdia / size 22 mm complete per meter | BI01010001010000000000000515BI0100001377 | 80 | mtr |
267 | 267 | Supplying & errection Drainage Pipe per meter | BI01010001010000000000000515BI0100001378 | 80 | mtr |
268 | 268 | Supplying & errection Iron Stand per set. | BI01010001010000000000000515BI0100001379 | 8 | set |
269 | 269 | Supply & fixing 5Kg Capacity ABC stored pressure type Fire Extinguisher of approved make with discharge hose & nozzle on wall with suitable iron bracket. including all accessories of approved make. | BI01010001010000000000000515BI0100001380 | 5 | set |
270 | 270 | PUMP & MOTOR SET Supply of singal phase 240V 2Hp (1.5 Kw) open well monoblock submersible pump motor set suitable for U.g Resorvoir having overrall head of (12 mtr to 19 mtr & discharge capacity of (258 LPM to 132 LPM). The discharge outlet size will be 40mm (1.5" inch) (Make kirloskar / KSB / crompton) | BI01010001010000000000000515BI0100001381 | 1 | set |
271 | 271 | Supply & Fixing of control panel suitable for single -Phase 2 HP Submersible Pump motor set comprising of DOL starter, dual Ammeter & Voltmeter, indicator lamp to be fixed on wall incl making connection & necy. earthing attachment. (make Brand approved by EIC) | BI01010001010000000000000515BI0100001382 | 1 | set |
272 | 272 | Supply & Laying 3 core 2.5 sqmm flat submersible cable \n(Finolex)incl. 3/4" PVC HD PVC pipe through U.G. trench with necy Jointing materials incl. S/Laying PVC HD PVC pipe (Oriplast)\n | BI01010001010000000000000515BI0100001383 | 120 | mtr |
273 | 273 | Labour charger for testing & commissioning of the above pump-motor set along with starter | BI01010001010000000000000515BI0100001384 | 1 | item |
274 | 274 | LAN & CCTV\nSupply and installation of 9U Wall mounted Rack with cooling fan and other relevant accessories.)(make-Valrack/HCL/dlink) | BI01010001010000000000000515BI0100001385 | 1 | No |
275 | 275 | Supply of 24Port CAT 6 Patch Panel-1.5mm thickness with Black (RAL9005) color painted,Housing ABS, UL94(Dlink/Molex) | BI01010001010000000000000515BI0100001386 | 1 | No |
276 | 276 | UTP CAT 6 Patch Cord - 2M(Legrand/Molex/Dlink) | BI01010001010000000000000515BI0100001387 | 50 | Nos |
277 | 277 | UTP CAT 6 Patch Cord - 1M(Legrand/Molex/Dlink) | BI01010001010000000000000515BI0100001388 | 50 | Nos |
278 | 278 | Dual port Cat5 & cat6 utp information outlet with british-american style face plate (Molex/Batton/Dlink/schneider)(Molex/Batton/Dlink) | BI01010001010000000000000515BI0100001389 | 50 | Nos |
279 | 279 | Supply of 24 Port 10/1000 Ethernet switch(Dlink/Batton/Netgear) | BI01010001010000000000000515BI0100001390 | 1 | No |
280 | 280 | Supply of UPS - 600VA (APC/Microtek/Emerson) | BI01010001010000000000000515BI0100001391 | 1 | No |
281 | 281 | Supplying & Drawing LAN cable (CAT6) (Brand approved by\nEIC) in prelaid PVC rigid conduit/ in polythene pipe embeded\nin wall.(SOR, PWD, ELECTRICAL.2017; PAGE 63, ITEM-21) | BI01010001010000000000000515BI0100001392 | 1500 | Mtr |
282 | 282 | Supplying & Drawing 2-pair Telephone cables with high\ndensity polyethylene insulated solid annealed high conductivity\nbare copper of dia 0.5mm in prelaid PVC rigid conduit/ in\npolythene pipe embeded in wall.(SOR, PWD, ELECTRICAL.2017; PAGE 63, ITEM-23) | BI01010001010000000000000515BI0100001393 | 1000 | Mtr |
283 | 283 | Supply and laying of 5 Pair telephone cable through pvc conduit embeded in wall(25 mm dia, pvc conduit) | BI01010001010000000000000515BI0100001394 | 500 | Mtr |
284 | 284 | supply and fixing of 10 pair DB with original krone module-conceiled | BI01010001010000000000000515BI0100001395 | 2 | No |
285 | 285 | Supply Installation Testing Commissioning of 8 channel NVR-WITH POE(Hikvision/Honeywell/Bosch/Dahua ) | BI01010001010000000000000515BI0100001396 | 1 | No |
286 | 286 | Supply Installation Testing Commissioning of 2MP IP IR Dome Camera, Res: (1920 x 1080), 30M IR Range,Focal Length(mm) 3.6,Dual compressed stream,Image Sensor Type- CMOS;Image Sensor Size 0.357 inch; Day/Night Capable; IR illumination Range:(mtr) 30 Focal Length(mm) 2.8; UL certified\n(Honeywell/Bosch/Dahua/CPPlus/Hikvision ) | BI01010001010000000000000515BI0100001397 | 2 | No |
287 | 287 | Supply Installation Testing Commissioning of 2MP IR Bullet Camera-Image Sensor Type CMOS; Image Sensor Size -0.357 inch; Camera Image Sensing capacity : 2MP;\nResolution Full HD (1920 x 1080 Pixel) Day/Night Capable IR illumination Range(mtr) 30 Focal Length(mm) 3.6 Video Streaming Dual compressed stream; UL certified(Honeywell/Bosch/Dahua/Avigilion/HIKVISION ) | BI01010001010000000000000515BI0100001398 | 2 | No |
288 | 288 | Supply Installation Testing Commissioning of Surveillance Hard Disk 4 TB; Interface Type:SATA;Synchronous Transfer Rate (Maximum) (MB/s) :150 ;\nMake: WD/Seagate | BI01010001010000000000000515BI0100001399 | 1 | No |
289 | 289 | Supply Installation Testing Commissioning of 19" LED Monitor; Min Resolution: 1366 x 768; 200 nit.\nLG/Samsung | BI01010001010000000000000515BI0100001400 | 1 | No |
290 | 290 | Supply Installation Testing Commissioning of 6U Equiment Rack-loaded with necessary accessories\nvalrack/HCL | BI01010001010000000000000515BI0100001401 | 1 | No |
291 | 291 | Supply of 3 Core Power Cable (Min-1.5mm)\nFinolex/Molex/havells | BI01010001010000000000000515BI0100001402 | 200 | Mtr |
292 | 292 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]\non wall, ceiling with saddles and other accessories as required\nand mending good damages to building works(20mm size)(SOR-2017; Page-60) | BI01010001010000000000000515BI0100001403 | 1500 | Mtr |
293 | 293 | Cable Laying , Fitting, Fixing, Termination & Installation, commissioning Charges(1Electrical and 1Electronic technician for 20 days)(CPWD SOR 2018: page-82 ) | BI01010001010000000000000515BI0100001404 | 1 | Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail