}

Procurement Of Ctvs Implants And Surgical Consumable Items At Rims, Ranchi, RIMS, Ranchi-Jharkhand

Rajendra Institute Of Medical Science-RIMS has published Procurement Of Ctvs Implants And Surgical Consumable Items At Rims, Ranchi. Submission Date for this Tender is 14-02-2020. Medicine Tenders in RIMS, Ranchi Jharkhand. Bidders can get complete Tender details and download the document.




Tender Notice

23080508
Procurement Of Ctvs Implants And Surgical Consumable Items At Rims, Ranchi
Open Tender
Indian
Jharkhand
RIMS, Ranchi
14-02-2020

Tender Details

Procurement Of Ctvs Implants And Surgical Consumable Items At Rims, Ranchi - 2 Intravenous Cannula N• Size: 14 G To 22G. N• Iso / Ce Certified N• Non-Toxic, Biologically Acceptable Fep / Polyurethane Catheter With Metallic Stellate. N• Catheter Should Be Made Up Of Encapsulated Radio-Opaque Material. N• The Stellate Should Have Taper-Cut And Sharp For Easy Insertion. Beyond This Cut End It Should Not Protrude More Than 1Mm Further Than The Tip Of Catheter. N• Injection Port With One-Way ( Silicone Valve ) With Flange Attached To The Catheter Shaft. After Insertion Into Blood Vessel It Should Be Easy To Open To Open And To Close The Valve Without Application Of Much Pressure So As To Avoid Injuries To The Blood Vessel. N• Standard Size Hub Attached To The Distal End For Intravenous Line Attachment. N• Injection Port With Color-Coded Cap. N• Color-Coding For Different Sizes. Npre-Sterilized Packed Singly With Tyvec Paper And Blister ( Cannula Manufacturing Date, Size, Length Of Cannula Etc. Should Be Clearly Printed ) N• Size- 14, 16, 18, 20, 22 & 24G. N 3 Radial Arterial Cannula Ncatheter Lumen Size 20G Ncatheter Length 8Cm , N1 Safety Needle Size 20G , 1 Straight Guide Wire, 1 Pu Extension Tube Length 10 Cm With An Autoflush. N 4 Pressure Monitoring Line 200 / 150 Cm M / F Nlength 200 / 150 Cm , Connecter Size-Male / Female Nmade Of Clear , Non-Toxic Medical Grade Pvc , Sterile. N 5 Pressure Monitoring Line 200 Cm M / M Nlength 200 Cm , Connecter Size – Male / Male Nmade Of Clear , Non-Toxic Medical Grade Pvc, Nsterile . N 6 Femoral Arterial Cannula ( Adult ) : N• Femoral Arterial Cannula ( Adult ) Seldinger Technique Polyethylene Shall Have Radio Opaque Line And Anti-Kink Collar And Wing Hub For Fixation To Skin. N• Size-1. 20G-Length 8Cm. One Transparent And Xro Catheter ( Polyethylene ) , One Introducer Needle One Straight Guide Wire. N• Size-2.18 G Length 10Cm. One Transparent And Xro Catheter ( Polyethylene ) , One Introducer Needle One Straight Guide Wire. N• Size 3. 16 G Length 15& 20Cm. One Polyurethane Xro Catheter One Introducer Needle, J Guide Wire-Advancer N• Preferably Us Fda Approved N 7 Femoral Arterial Cannula ( Paed ) : N• Femoral Arterial Cannula ( Paed ) Polyurethane With Radio Opaque Line Introduced By Seldinger Technique With Integral Polyurethane Extension Tube Length 4.5Cm With Fixation Wing. N• Should Be In A Peel Pack. N• Should Have One Polyurethane Catheter, One Introducer Needle, And One Straight Guide Wire With Flexible Tip, One 50X50 Cm Drape Sheet. N• Size 22G Length 4, 6, 8, 20Cm. Npreferably Us Fda / Ce Approved N 8 Central Venous Catheters – Double & Triple Lumen: N• Should Bemanufactured From Specially Formulated And Biocompatible Pu Material. N• Should Be Soft Tip Catheter For Easy And Non-Traumatic Insertion, Based On Seldinger Technique. N• Should Be Sterile And Individually Packed In Hard Blister Pack. N• Kit Should Consist Of: Na ) Soft Tip Polyurethane Catheter, “J” Tip Guide Wire ( 0.035” – 30-80 Cm ) With Guide Advancer. Nb ) “Y” Shaped Introducer Needle ( 18 G X 70 Mm ) . Nc ) Tissue Dilator. Nd ) Suture Wing And Clamp Fastener, Scalpel, Injection Ports, Extension Line Clamps, Syringe 5Ml Ne ) Injection Site, Hypodermic Needle ( 17G To 21G ) Nf ) Needle Sponge N• Sizes: Double Lumen: 7 Fr, 16 Cm, 14 / 18 G, 18 / 18G. N• Triple Lumen: 7 Fr, 12 To 20 Cm, 16 / 18 / 18 G, 14 / 18 / 18G, 20 / 22 / 22G. N 9 Paediatric Double Lumen Cvp Kit N• Should Have Polyurathane Double Lumen Kit With Flexible Distal Tip Fully Radio Opaque Should Have Flexible Distal Tip Fully Radio Opaque Graduation Each Centimeter From 5Cm To The Distal Tip. J Guide Wire. Should Have Distal & Proximal Lumen 18 G Each For Rapid Infusion. N• Size. 3-4Fr Length 10-15Cm ( Straightguide-Wire ) N• 4.5Fr Length 6 & 12.5Cm. J Guidewirenitinol. N• 6 Fr. – Length 15- 20Cm N• Preferably Us Fda Approved N 10 Single Lumen Catheter ( Seldinger Technique ) N• Should Be Polyurethane Single Lumen Catheter With J Guide-Wire Non Kinking Kit Should Be Radio Opaque With Fixation Wing & Integral Extension Tube With Flexible & Transparent Extension Tube ( Pur ) N• Size – Catheter 12-16G, N• Lengths- 10Cm-20Cm N 11 La Line Central Catheter ( All Sizes ) N• Should Be Long I.V Catheter With External Needle And Fixed Proximal Hub Catheter In Fully Radiopaque Polyurethane Protected By A Non Touch-Handling Sleeve Marking Every Cm 10 To 20Cm. N• Should Be Made Available In Assorted Sizes. N 12 Swan Ganz Pa Catheter Introducer Kit Set: N• Percutaneous Sheath Introducer Set Should Have Bonded Hemostasis Valve & Side Port Along With .035 X 45 Cm Straight & “J” Tip Guide Wire For Introducing 7.5 Fr& 8.0 Fr Pa Catheter. N• It Should Have Sheath Diameter Of 8.5 F & Sheath Length Of ˜11 Cm. It Should Be Made Of Radiopaque Polyurethane & Should Have A Coating Of Heparin As Well As Antimicrobial Material ( Benzalkonium Chloride ) On Entire Sheath Surface. N• It Should Come With 1 Catheter Contamination Shield, ˜80 Cm In Length. N• It Should Have One 4-Waystopcock, One Vessel Dilator & Four 4X 4Gauze Pads.0Ne Disposable Scalpel, # 11 Blade & One 18 Ga X 2 ½ Thin Wall Needle. N 13 Swan Ganz Thermodilution Vip Catheter N• Flow Directed 5-Lumen Balloon Tipped Pulmonary Artery Catheter. 7.5 Fr In Diameter &˜ 110 Cm In Length N• It Should Have A Coating Of Heparin As Well As Antimicrobial Material ( Benzalkonium Chloride ) On Entire Catheter Surface. N• Should Be Able To Give Cardiac Output Using Thermo Dilution Method. N• Should Be Able To Give Pa Pressure, Pawp & Ra Pressure When Connected To Transducer. N• Should Have Proximal Infusion &Proximal Injectateports At ˜31 Cm &˜30 Cm Respectively. N• It Should Come With One Volume-Limiting Syringe Of 1.5Cc For Balloon Inflation. N 14 Swan Ganz Pa Catheter N• Flow Directed 3 Lumen Balloon Tipped Pulmonary Artery Catheter, 7 Fr In Diameter &˜110 Cm In Length N• Should Be Able To Give Pa Pressure, Pawp & Ra Pressure When Connected To Transducer. Should Have Proximal Infusion Port At 30 Cm. Recommended Guide Wire Size 0.89 Mm. N• It Should Come With One Volume-Limiting Syringe Of 1.5Cc For Balloon Inflation. N 15 Disposable Pressure Transducer N• One Disposable Pressure Transducer With Flush Device & Vent Stopcock. N• It Should Be Able To Give A Pressure & Waveform On Any Multipara Monitor With Ibp Module. N• It Should Have 3±1Ml / Hr Flow Rate Across Flush Device With Iv Bag Pressurized To 300 Mm Hg N• It Should Have Moisture Resistance Connector Sheath Without Pins. N• Must Have A Natural Frequency 25-40 Hz To Give Accurate Reading At Wide Variations Of Heart Rate Range. N• It Should Have An Operating Pressure Range Of -50 To 300 Mmhg, With Overpressure Tolerance Range Of -500 To +5000 Mm Hg. N• It Should Work On Ambient Temperature ( Operating ) 15ºc To 40ºc, And Must Be Suitable For Storage At -25ºc To +70ºc. N• It Should Have Sensitivity Of 5.0Μ V / V / Mm Hg ± 1% N• It Should Have An Integrated Flush Device, Which Can Be Operated From Any Direction For Easy Accessibility. N• It Should Have A Test Port That Can Be Used To Check The Performance Of The Transducer When Used Along With A Simulator Device For The Purpose. N 16 Pressure Infusion Bag N• Should Be Made Up Of Durable Plastic To Prevent The Rip & Tear Of Bag N• Should Have Clear Sleeve Around The Bag To See The Contents Of The Fluid Bag. N• Should Have Convenient Iv Pole Loop Hanger N• Should Have I.V Bag Holder To Hang The Fluid Bag Inside. N• Should Have Double Sealing To Prevent The Rip Or Tear Of Pressure Bag N• Should Have Stopcock Valve. N• Should Have Efficient Palm Fitted Bulb For The Inflation Of Bag. N• Pressure Gauge Should Have 360-Degree Window To See Pressure From All Sides. N• Should Have Built In Bleed Valve To Check The Over Inflation Of The Bag. N• Sizes- 500, 1000 & 3000Ml. N• Each Bag Should Have Aneroid Pressure Gauge With Inflation Capacity Of 400 To 700 Mmhg. N 17 Anatomical Face Mask Size N• Should Be Good Quality And Latex Free, Reusable Autoclavable And Should Conform To Its Face 22Mm Female Connection, N• Inflatable Air Seal Size 0, 1, 2, 3, 4, 5, 6. N 18 Silicon Face Mask Ce Marked Na ) Should Be Transparent For Easy Observation. Nb ) Should Be Flexible & Can Be Repeatedly Autoclavable. Nc ) Should Be Of Reputed Brand Nd ) Each Unit Should Have Print Of Company Name & Size. Ne ) Sizes 0, 1, 2, 3, 5. Nf ) Should Have Self-Inflating Soft Cuff ( In Which Pressure Can Be Regulated ) . Ng ) Should Have Comfortable Grip For Tight Seal. N 19 Oxygen Masks:O2 Mask Adult &Paed: N• Molded Facemask Manufactured From Non-Toxic, Non-Irritant Medical Grade Pvc. N• Should Be Provided With Adjustable Elastic Strap. N• Should Have Swivel Connector For Convenience Of Attachment To The Oxygen Tube. N• Should Have 200 Cm Long Multichannel Tube To Ensure Continuous Flow Of Oxygen. N• Should Have Proximal End Fitted With Soft Funnel Shape Connector For Connection To Oxygen Source. N• Should Be Individually Packed In Poly Bag. N 20 Nebulizer Mask Adult & Paed.: N• Soft, Clear Aerosol Mask With Anatomical Form For Long Term Use. N• Should Have Gently Rolled, Feathered Edges With Integrated Nose Bridge For Extra Comfort. N• Should Have Rotating Type Connector For Patient’S Comfort. N• Should Have Larger Surface Area With Unique Convex Cone Design To Ensure Maximum Capillary Action And To Eliminate Medication Wastage. N• Should Be Able To Nebulize 3 Cc Within 10 Minutes In Horizontal Or Vertical Position So As To Ensure Patient Comfort. N 21 Closed Circuit ( Pediatric ) : N• Iso Marked. N• Length-1.75Mtr. Double Tubing With A Y Connector With Least Dead Space. N• Y Connector Adopter 15Mm To 20 Mm Connector. N• Latex Free Medical Plastic Material, Disposable, Non-Irritant To Tissue, And Should Not React To Anesthetic Gases And Volatile Agents. N• Outer Diameter ( Od ) 10-12Mm. N• Bag-1L. Capacity, Natural Latex Medical Grade Rubber, Antistatic, Soft And Should Not React With Anesthetic Gases And Agents. N• Expandable Type, Corrugated, Non-Kinkable Tube. N 22 Mapleson C Breathing System Adult: N• For Use During Anesthetic Procedures, Critical Care Areas And Transportation Of Adult Patients; 1.8M Length 2 L Bag With 15 F / 22F Connector Apl Valve. N 23 Mapleson C Breathing System Pediatric: N• For Use During Anesthetic Procedure, Critical Care Areas And Transportation Of Pediatric Patients; 1.8M Length 2L Bag With 15F / 22F Connector. N 24 Oxygen Recovery Kit: N• It Should Be Specially Designed Kit With ‘T’ Shaped Connector For Delivering Oxygen. N• It Should Have 15 Mm Connector To Fit All Tracheal Tubes. N• It Should Have Suction Port At Elbow To Facilitate Oro-Bronchialsuctioning Without Disconnecting The Patient From Oxygensource. N• It Should Have Two-Meter Long Star Lumen Tube To Enable To Connect Thet-Connector With Oxygen Source. N• Distal End Should Be Open For Exhaling The Waste Gases. N• Should Be Sterile And Individually Packed In Peelable Pack. N• Unit Should Comprise Of: ‘T’ Shape Connector & Two Meter Long Tube. N 25 T Piece With Apl Valve N• Should Be Good Quality, Light Weight, Non Conductive Disposable T Piece With Corrugate Tubing 1.8M Circuit Length, Low Resistance, 500 Ml Bag With Apl Valve With 15F / 22F Connector, Safety Cap. N 26 Anesthetic Circuit Holder Of Adult, Pediatric And Neonatal Circuits N• Anesthetic Circuit Holder For Adult And Pediatric Circuits, Should Be Reusable With One Joint And Flexible Rod With Under Mattress Fixation; Adjustable Height N 27 Endotracheal Tubes With Cuff ( Disposable ) : N• Pre-Sterilized, Single Use N• Siliconized Pvc Non-Toxic To Tissues. N• Implantation Tested Marking On The Tube. N• Thermo-Sensitive To Adapt To Tracheal Anatomy. N• Non-Kinkable. N• Bevel With Murphy Eye. N• Radio-Opaque Line All Along The Length Of The Tube To Detect The Correct Position On X-Ray. N• Should Adopt Universal Connector Of 15Mm And Should Be Compatible With All Circuits. N• Cuff Should Be Bonded, Non-Herniating. N• Size Range- 2.5 To 9.0 Mm In 0.5Mm Increments. N• Inflation Of The Cuff Balloon Via A One-Way Valve With A Pilot Balloon And Should Be On The Concave Aspect Of The Tube. N• Depth Marker At The Proximal Cuff End, 3 Cm From The Cuff. N• Cuff Should Be Smooth, Non-Traumatic, Low-Pressure High Volume. N• Ett Opening Should Be Beveled Type, Rounded Edge, Facing To The Left End Of The Tube With An Angle Of 38 + / - 100 N• Markings On The Tube To Know The Depth Of Insertion And Fixation At Mouth. N• Specified Mention On The Tube- No Nasal / Oral No Outside Diameter Od In Mm. No Inside Diameter Id In Mm. N 28 Double Lumen Endotracheal Tube: N• Made Of Medical Grade Pvc N• Left And Right Sided. N• All Sizes. N• Bronchial Cuff Should Be Of Blue Color And Its Pilot Balloon Should Be Also Of Blue Color For The Ease Of Differentiating Between Tracheal & Bronchial Cuffs. N• Pre-Sterilized, Ready For Use. N• Should Have Pre-Inserted Stellate To Help Maintain The Shape And Curve Of The Tube. N 29 Thermoplastic Supra-Glottic Airway Device N• Should Have Soft Non Inflatable Anatomical Seal, Epiglottis Blocker; Buccal Cavity Stabilizer, Integrated Bite Block; Integrated Gastric Channel For Passage Of Nasogastric Tube N• Size: 1, 1.5, 2, 3, 4, 5 N 30 Laryngeal Mask Airway: N• Reusable ( Autoclavable ) Airway Mask With Thick Main Tube Wall To Reduce The Risk Of Crushing. N• Flexible Tube, Transparent. N• 15Mm. Male Connector For Universal Breathing Circuit Connection. N• Inflatable, Soft, Smooth Silicone Oval Mask. N• Color-Coding Of The Pilot Balloon For Size Identification. N• Attachment Of Mask With Tube Diagonal. N• Aperture Bar At The Distal End. N• Size: 1.0, 1.5, 2.0, 2.5, 3, 4, 5. N• Ce Marked N 31 Laryngeal Mask Airway: N• Reusable ( Autoclavable ) Airway Mask With Thick Main Tube Wall To Reduce The Risk Of Crushing. N• Flexible Tube, Transparent. N• 15Mm. Male Connector For Universal Breathing Circuit Connection. N• Inflatable, Soft, Smooth Silicone Oval Mask. N• Color-Coding Of The Pilot Balloon For Size Identification. N• Attachment Of Mask With Tube Diagonal. N• Aperture Bar At The Distal End. N• Size: 1.0, 1.5, 2.0, 2.5, 3, 4, 5. N• Preferably Ce Marked N 32 Guedel Airway N• Disposable, Supplied Pre-Sterilized Ready To Use. N• Should Have A Rigid Body To Maintain Airway; N• Soft Tip; One Piece With Re-Enforced Hollow Bite Block; N• Distal End With A Flange. N• All Sizes-000, 00, 0, 1, 2, 3, 4. N• Color Coding N• Preferably Iso / Ce Certified N 33 Nasopharyngeal Airway: N• Made Of Medical Grade Pvc N• Implant Tested Material Marked On The Airway. N• Thermo- Sensitive Material, Which Confirms The Naso-Pharyngeal Anatomy. N• Kink Resistance. N• Smooth Outer Surface And Atraumatic Bevel With Rounded Edges. N• Enlarged Flange At The Distal End To Protect The Airway From Loss In The Nasal Passage. N• Size: 4, 5, 6, 7, 8, & 9 Mm Id. N• Should Be Disposable Sterile And Ready For Use. N 34 Ntubating Stylets N• Made Of Malleable Material; N• Latex Free; N• Sterile; N• Aluminum Core ( Mri Safe ) ; N• Sizes 6Fr, 10 Fr. , &14Fr. N 35 Emergency Failed Intubation Tube- N• The Tube Should Have Unique Double Lumen Design For Rapid Establishment Of An Effective Airway Through Either Esophageal Or Tracheal Placement. N• There Should Be Blind Placement, Which Eliminates The Need Of Laryngoscope. N• The Tube Should Have Pharyngeal Balloon, Which Inflates To Hold Device Firmly In Place, And Helps Prevent The Escape Of Gas Through Nose Or Mouth. N• The Tube Should Have Full Length Lumen Which Allows For Suctioning Of Gastric Content S With No Interruption Of Patient Ventilation Should The Tube Airway Be Placed In The Esophagus. N• Esophaguscuff Should Inflate To Seal The Esophagus So That Gas Does Not Enter The Stomach And Gastric Content Are Not Aspirated. N• Should Be Available In Two Sizes Of 37Fr 7 41Fr. N• Tube Should Have Number Of Holes For Better Airway Passage. N 36 Percutaneous Tracheostomy Set With Tracheostomy Tube: N• Should Be With Tracheostomy Tube. N• Should Have Multiple Dilators Of Different Sizes- 14Fr., 21Fr., 24Fr., 27Fr. N• Guiding Catheter Over Which The Dilator Is Introduced. N• The Guide Wire Should Have Position Markings. N• Should Have Introducer Needle With Sheath. N• Should Be Supplied With Essential Accessories. N 37 Tracheostomy Tube With Subglottic Suction. N• All Sizes, N• Large Capacity, Low Pressure Cuff. N• Should Have A Separate Port For Subglottic Suction. N 38 Tracheostomy Tube N• All Sizes, N• With And Without Cuff N• Large Capacity, Low-Pressure Cuff. N 39 Corrugated Tube Connector N• Should Allow Movement Of Breathing Circuit At Patient End. N• Should Allow Connection Between All Breathing Circuits And The Et Tube Connector. N• The Corrugated Tube Should Be Expandable. N• Should Be Made Of Medical Grade Pvc. N• Should Be Compatible With Ett And Tracheostomy Tube. N 40 Catheter Mounts With Bronchoscopy Port: N• Should Be Flexible & Extendable N• Should Be Having Bronchoscopy Port. N• Should Be 360 Degree Rotating Head. N 41 Suction Tube 30M Coil, 7Mm Id With Bubble Non Conductive 42 Suction Tube 30M Coil 5Mm Id With Bubble Non Conductive 43 Hme Filters For Adults: Low Dead Space, Hydrophobic Filtration Incorporated With Heat And Moisture Exchange Filter And With Retainable Gas Sampling Port, Disposable Good Quality. 44 Hme Filters For Neonatal: Low Dead Space, Hydrophobic Filtration Incorporated With Heat And Moisture Exchange Filter And With Retainable Gas Sampling Port, Disposable Good Quality. 45 Hme Filters For Pediatrics: Low Dead Space, Hydrophobic Filtration Incorporated With Heat And Moisture Exchange Filter And With Retainable Gas Sampling Port, Disposable Good Quality. 46 Anti Microbial Breathing System Heated Wire N• Should Be Light Weight And Flexibleto Minimize Drag On Circuits, N• 1.5M Heated Inspiratory Tubing, N• Silver Impregnated 0.5M Humidifier Connection Tube, N• Auto Float Humidification Chamber With Dual Float N• Sizes: Adult, Pediatric, Neonatal. N 47 Suction Catheter Thumb Controlled N• Working Length Should Be At Least 50Cms ( Working Length Without Connector ) For 10 Fr.& Above; Should Be At Least 40 Cm. In Length Below 10 Fr. N• Should Be Color-Coded And Should Have Open End With Lateral Eye With Length Marked In Centimeters With Male Connector With Vacuum Control Device As Iso Specifications. N• Should Be In Straight Soft Blister Packing. N• Should Have Markings On The Full Length Of The Tube N• Should Have Markings On The Catheter. N• Sizes 6, 8, 10, 12, 14, 16, And 18 Fr. N 48 Blood Administration Set: N• Preferably Ce Marked. N• Manufactured From Non-Toxic Medical Grade Pvc. N• Molded Cylindrical Double Drip Chamber Fitted Withsharp Plastic Spike And Nylon Filter. N• Roller Type Regulator For Accurate Flow Control. N• Molded Bubble Latex Bulb For Extra Medication Or Y-Port. N• 18G Vein Needle With Protective Cap. N• Double Pack. N• Sterile, Ready To Use ( By Eto / Gamma Ray ) N• Tube Length Should Not Be Less Than 150 Cm., It Should Be Transparent And Non-Kinkable. N• The Filter Shall Have Uniform Pores And Shall Cover A Total Area Of Not Less Than 10.0 Cm2 And Shall Have Pore Size Of 200 Μm. + / - 20 Μm And Should Be Clearly Mentioned On The Package. N• All Pvc Items Should Be Certified Medical Grade Only. N 49 Leucocyte Reducing Blood Transfusion Set: Nblood Set Should Have Drip Chamber And Filter With Proven Leucocyte Reduction Properties For Leucocyte Free Blood Transfusion For Organ Transplant Use. It Should Have Filter Size 40 Microns And 180 Sq. Cm Of Filter Area And Should Have Attached Iv Set With A Luer Lock Tip. N 50 Measured Volume Set ( Preferably Iso / Ce ) N• Should Be Made Up Of Pvc Material N• Should Have Soft Cylindrical Type Measure Volume Chamber With Float Valve To Prevent Air Embolism N• The Set Should Have Transparent Tubing And Chamber. N• Should Have Capacity Of 100Ml And 150 Ml. N• Should Have Drip Nozzle With Reduced Size Of Drop That Has To Be Uniform At 60 Drops / Ml. N• Should Have Molded Bubble Latex Bulb For Extra Medication Or Y Port For Injection. N• Should Be Sterile Ready For Use. N• Should Be Double Packed. N• Should Have Short Bevel 23 G Vein Needle. N• Should Have Built In Airway For Bottle Perforating Spike ( Air Vent ) . N 51 Dressing For The Fixation Of I.V. Line N• Transparent. N• Good Quality N• Sizes – 6X7cm; 7X9cm N 52 Surgial Tape Non Woven, Viscose Rayon Porous Backing ( Micro Pore Type Paper Tape ) Without Dispenser. Nsizes : N• ½ X 9.10 Mtrs. N• 1 X 9.10 Mtrs. N• 2 X 9.10 Mtrs. N• 3 X 9.10 Mtrs. N 53 Transparent Dressing For Fixation Of Multi Lumen Catheter “ Tegaderm Type” Orsimilar. Nsize – 8.5Cm X 10.5Cm And 100.5Cm X120.5Cm N 54 Three Way Stop Connector ( Disposable ) Without Luer Lock Na ) Three-Way Stopcock Should Be Manufactured From Medical Grade, Clear Transparent Polycarbonate. Nb ) It Should Have Three Arm Handle Which Should Be Easy To Operate. Nc ) Should Have Minimum Residual Volume. Nd ) Should Have Rigid Construction With Circular Flow Channel To Prevent Air Trap. Ne ) Should Be Provided With Two Female Luer Lock Ports And One Male Luer Lock Port With Rotating Lock. Nf ) Should Be Sterile And Should Be Individually Packed In Blister Pack. Ng ) Its Plastic Material Should Be Medical Grade Pvc. Nh ) Should Have Intermediate Locking Slot. Ni ) Male And Female Connector Should Be Compatible To All Needle And Iv Cannula. N 55 Spiral ( Polyethylene ) Tubing N• Should Be Spirally Coiled Tubing ( Polyethylene ) For Drug Infusion ( Drug Compatible ) . N• Size – 100, 150, 200, 300 & 400Cm. N• Preferably Us Fda Approved N 56 Polyethylene Pressure Extension Tube N• Should Be Polyethylene High Pressure Extension Tube ( Drug Compatible ) N• Size – 11, 30, 50, 100, 150& 200Cm. N• Preferably Us Fda Approved. N 57 Extension Line For Light Sensitive Drugs N• Extension Line For Light Sensitive Drugs ( Anti Uv ) . N• Size – 100, 150, 200Cm. N• Preferably Us Fda Approved. N• It Should Have 200 Cm Long Multichannel Tubing To Ensure Continuous Supply. N 58 Basic Parallel Ventilator Circuit: N• Fda & Ce Marked Should Incorporate With In-Line Nebulization T Valve With Automatic Closer Preventing Pressure Drop. Must Be Clear Construction. N 59 Flexible Tubing – Silicone: N• Highly Flexible Medical Grade Silicone Tubing, Autoclavable, Can Be Sterilized By Eo. N• Sizes : 6Mm & 8Mm; N• Length Of Tube Roll Should Be 60.0Mtr. N 60 Patient Identification Band: N• Patient Identification Band Should Be Made Of Skin Friendly, Non-Tear Able Material. N• It Should Have Convenient Button Type Locking Feature And Larger Write On Space. N• Colors: Red, White, Green& Blue. N 61 Surgical Gloves: N• Powder Free Polymer Coated Latex Surgical Gloves N• Made From Natural Rubber Latex N• Pouch Peel Down To Open. N• Sizes: 6, 6.5, 7.0, 7.5, 8.0, 8.5. N 62 Examination Gloves - Latex Free: N• Examination Gloves Manufactured With 100% Latex Free Material. N• Gloves Should Be Odor Free, Powder Freeandlatex Associated Allergy. N• Should Be Made Of Sturdy Material That Does Not Get Puncture Or Tear Easily. N• Should Have Flexible Design For Easy Donning. N• Should Have Micro Rough Texture On Fingers. N• Sizes: Small, Medium, And Large. N• Box Of 100 Pieces N 63 Disposable Surgeon Face Mask - Sterile: N• Three Layermask, Whichshould Offer Excellent ( 99% ) Bacterial Filtration Efficiency. N• Non- Woven Breathable Fabric, Each Layer Of 25 Gsm. N• Should Be Super Smooth, Soft And Ultrasonically Weldedair Permeable For Comfortable Use. N• Should Have Flexible Nose Clip ( Rust Free Pvc Coated ) For Proper Positioning On The Nose Bridge. N• Size: 17.5 X 9.6 Cm. Tie String: 90 Cm. N• Should Be Sterile & Should Be Individually Packed In Poly Pack. N 64 Surgeon’S Cap- Disposable: N• Should Be Of Good Quality N• Made From Non-Woven Breathable Fabric Of 35 Gsm N• Well Fitting With Back Elastic Or String. N• Air Permeable. N• Properly Ultrasonically Sealed For Uniformity. N• Different Sizes & Color. N 65 Female Crimp Cap, Disposable: N• Should Be Of Good Quality. N• Made From Non-Woven Breathable Fabric Of 15 Gsm N• Well Fitted With Double Elastic Or String. N• Air Permeable. N• Properly Ultrasonically Sealed For Uniformity. N 66 Surgeon’S Gown: N• Blue Color. N• Made From Non-Woven Spun Lace Fabric Breathable But Impermeable To Blood And Water N• Re-Enforced Front To Provide 100% Protection Against Any Amount Of Blood And Fluid In User-Friendly Packing. N• Gamma Irradiated. N• Preferably Have Ce Mark. N 67 Disposable Gowns ( For Attendants ) : N• Purple Color N• Moisture Repellent Properties N• Made Of Non-Woven Fabric N• Size: Medium, Large And Extra Large N• Length -150 Cm, Width- 160 Cm. N 68 Complete Kit For Hiv / Hbv Patient: N• Disposable Surgeon Gown With Waterproof Inter-Lining On Chest & Arms. N• Hood Cap ( Monkey Cap ) N• Face Mask With Eye Shield N• Long Shoe Cover N• Arm Guard N• Cut Sheet – 1. N• Slit Sheet- 1. N• Draw Sheet: 220 X 120 Cms- 4 Nos. N• Trolley Cover Latex Laminated – 135 X 20 Cms- 4 Nos. N• Mayo Stand Cover- 1 No. N• Patient Drape Sheet- 1 No. N• Suture Bags- 2 Nos. N• Disposable Bag- 1 No. N 69 Disposable Shoe Cover: N• Should Be Of Good Quality ( Thick ) N• Made From Non-Toxic Non-Woven, Thick Fabric. N• Well Stitched In Universal Regular Size. N• Skid Resistant & Dust Proof. N• Hard Elasticated For Better Grip And Easy To Wear. N• Should Cover The Ankles. N• Size: Assorted- ( Std. Size Of Shoe From 7 To 12 ) & Blue Color. N 70 Disposable Foley’S Catheter ( 2 Way ) – Adult &Paed: N• Disposable 2 Way Latex Foley Catheter N• Should Bemanufactured From Natural Rubber Latex Coated With Silicone So As To Eliminatethe Risk Of Encrustation. N• Should Have Symmetrical Large Capacity Balloon To Ensure A Straight Tip Andproper Flow For Good Sphincter Action To Preventbladder Leakage. N• Should Have Coned Distal End With Burr Free Eyes For A-Traumaticinsertion. N• Should Have Hard Valve To Ensure Easy Inflation And Deflation Of Balloon. N• Balloon Capacity- 3-5 Ml For Pediatric And 30 To 50 Ml For Adult Catheter. N• Length- 20-30 Cm. N• Should Have Colour Coded For Instant Size Identification. N• Should Be Sterile And Should Be Individually Packed In Peel-Able Pack. N• Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 24 Fr. N• Preferably Iso 9002 Ce Marking Confirming Astm- F623-99 Guideline Specification For Foley’S Catheter. N 71 Disposable Syringe & Needle All Sizes Na ) Syringes Should Be Of Clear Pvc With Clear Markings Nb ) Should Have Rubber Seal In The Piston Nc ) Needles Should Be Appropriate Size And Thickness. Nd ) Sterilized, Disposable. Ne ) Isi / Iso / Ce Nf ) Sizes: 1Ml, 2Ml, 5Ml, 10Ml. N 72 50Ml Syringe ( With Luer Lock ) Na ) Should Be Made Of Clear Pvc. Nb ) Should Have Rubber Seal In The Piston Nc ) Should Have A Luer Lock N 73 Absorbable Disposable Pillow Cover For Standard Size 75X55cm 74 Disposablechamber For Bal Collection With Adapter Ndisposable Sterile Container For Bronchoscopy Application. N 75 Epidural Catheter With Needle N• Single Sterile Pack Should Contain Epidural Catheter With 1Cm Markings, N• Kit Should Contain Epidural Needle, Bacterial Filter And Detachable Injection Port. N• Should Be Available In Sizes 16 G, 18 G For Adult And 22-24G For Pediatric. N 76 Bite Block Size 4: Bite Block Size 4 For Oral Fixation Of Ett Size 6.5-8.0Mm, Laryngeal Tube Size 2 & 2.5 Tube Should Clip Into The Bite Block For Protection Against Occlusion. 77 Bite Block Size 5 :-Bite Block Size 5 For Oral Fixation Of Ett Size > 8.5Mm, Laryngeal Tube Size 2 & 2.5 Lma 2 & 2.5 Tube Should Clip Into The Bite Block For Protection Against Occlusion. 78 Bite Block Size 6:Bite Block Size 6 For Oral Fixation Of Laryngeal Tube Size 3, 4, &5 And Lmas, Tube Should Clip Into The Bite Block For Protection Against Occlusion. 79 Medical Grade Soda Lime Co2 Absorbent Granules Specification: N• Medical Grade Best Quality Soda Lime Granules. Hardness, Moisture And Absorption Should Be International Agency Certified. Should Be Good Quality For Closed Circuit. There Should Be High Contrast Pink To White Color Change After Absorbent Capacity Is Exhausted. Pack Size Should Be 5 Liter / Container. N 80 Disposable Dvt Sleeve ( Calf & Thigh ) 81 Disposable Dvt Sleeve ( Calf ) 82 Specification For Bis Sensors N• It Should Have Four Sensors Element To Capture, Recognize And Discard Artifact. N• Connector Should Provide Secure Click-In Connection With Push Button Release N• It Should Include An Additional Above Eye Element, Which Captures Critical Eye Motion Data, Along With Other Important Physiological Signals. N• It Should Have Flexible Design Adjusts To Different Head Sizes N• It Should Have Fda Approval N• Should Be Supplied By Authorized Channel Partner From Principal Company / Manufacture. Electrode Gel: Potassium Chloride ( Kcl ) , Latex Free. Sizes Adult And Pediatric N 83 Nirs Sensors. Adult And Pediatric 84 Disposable Pulse Oximeter Sensors ( Sp02 ) N• Should Be Compliant With The Equipment Intended To Continuously Estimate And Display Non-Invasively A Patients Arterial Blood Oxygen Saturation And Pulse Rate. N• Proposed Sensors Must Comply With Nellcortechnology. N• Digit Sensors Should Be Available In Adult, Pediatric, Neonatal And Infant Sizes To Accommodate Diverse Patient Sizes, Weights And Needs. N• Seller Must Have All Types Of Sensors Available ( E.G., Finger, Forehead, And Ear ) . Sensor Must Be Available In Adult, Pediatric, Infant And Neonatal Sizes. N• Sensor Extension Cables Must Be Available In 4 And 9 Lengths. N• The Sensors Must Be Compatible With All Generations Of Nellcoroximetry Technology In Nellcoroximeters And Oem / Licensee Multi-Para Meter Systems With All Generation Of Nellcor Technology. N• The Sensor Shall Resist Inadvertent Displacement. N• The Sensor Shall Resist Interference From Ambient Light. N• The Sensors Shall Not Be Adversely Affected By Fluid Spills Or Common Disinfectant Solutions. N 85 Disposable Ecg Electrode ( Adult ) : N• Should Have A Good Sticking Material, Solid Gel, Covered By Translucent / Transparent Thin Sheet. N• Should Be Hypo-Allergic & Certificate Should Be Attached. N• Sensor Should Be Good Quality, Preferably Of Silver. N• Should Be Usable Even If The Chest Is Hairy. N• Should Have Buttons ( Metal Snap: Stainless Steel Stud ) For Attachment To Ecg Electrodes. N• Should Have White Label Indicating Brand Mark. N 86 Infant Feeding Tube: N• Size: 3 To 10 Fr., Color-Coded. N• Silken Smooth Tube, Medical Grade Siliconized Pvc. N• X-Ray Opaque Line. N• Fitted With Female Luer Mount With Built-In Stopper / Lid. N• Packed In Peel-Off Pouch, Not Coiled Packing. N• Sterilized Ready To Use. N• Length Of Tube Minimum- 50 + / - 5 Cm. N• Smooth Rounded Tapered Distal End With Two Lateral Eyes. N 87 Urine Collection Bag With Transparent Volume Chamber: N• Sterile Ready For Use. N• Bag Should Be Manufactured From Clinical Grade Transparent Pvc. N• Capacity- 2000Ml.Marked In Increments Of 50 Ml. N• Fitted With Non-Return Valve To Avoid Spillage. N• One-Meter Long Super Smooth, Highly Flexible Non-Kinkable Tube Which Should Provide Approx. 6.5 Mm Diameter With Universal Male Connector. N• Leak Proof, Single Piece / Wielded Manufacture. N• Provided With Hanging Device To Be Fitted On To The Bed. N• Stopper Drain Should Be Attached With The Bag. N 88 Clinical Thermometer: N• Good Quality. N• Digital N• For Oral Temperature Measurement. N 89 Glucometer Test Strip: N• Accuracy- Error Not More Than + / - 20%. N• Sample Size Should Not Be More Than 5Μl. N• Test Time Should Not Be More Than 10 Sec. N• Interference With Commonly Used Drugs & Other Agents, Which Can Affect Blood Glucose Measurement, Should Be Declared. N• Shelf Life Of Strip Should Be More Than 1 Year. N• Shelf Life Of Strips After Opening Should Be Up To 6 Months. N• Glucometer Should Be Free From Coding Or Calibration Requirement In Order To Minimize Errors At User Level. N• Should Be Available In A Minimum Pack Size Of 25 Strips. N• Glucometer Should Start Testing Only When The Strip Has Absorbed The Required Sample Size In Order To Minimize Wastage Of Strips. N• Operating Temperature Should Be 10- 400 C. N• Measurement Range Between 10Mg / Dl And 600Mg / Dl. N• Battery Should Be Able To Do 1000 Tests Approximately And Should Run Preferably On Aaa Battery, Which Is Economical. N• Preferably Us Fda Approved, Ce Marked. N 90 Metered Incentive Spirometer: N• Volumetric Lung Exercise With Dual Printed Scale. N• Good-Better-Best Flow Cup To Encourage Slow And Deep Breathing Exercise. N• Advanced Low Work Of Breathing Design. N• Built-In Handle For Ease Of Use. N• Sensitive & Light Weight Bellow To Detect Smaller Volumes. N• Latex Free Compact Ergonomic Design. N• Smooth Mouthpiece With In-Built Dust Particle Filter. N• Size: 2500 Ml & 4000 Ml. N 91 Group B: Cardiac Surgery And Perfusion Items 92 Fibrin Glue Nfibrin Base Sealant To Stop Surgical Bleeding With Proven Technology N 93 Aortic Punch N• Blade Should Be Able To Float Around The Punch. N• Punch Should Be Available With Tapered Cutting Blade To Increase Visibility. N• Should Be Available In All Functional Sizes N 94 Coronary Artery Retraction Clips Sizes 3Mm And 5Mm N• Should Be Designed To Improve Exposure To A Coronary Anastomosis Site. Should Be Able To Small Prongs And Gently Hold Tissues Away From The Vessel To Improve Vision. N 95 Temporary Pigtail Pacing Wire N• Should Include Unipolar Atrial And Ventricular Pacing, Pediatric Unipolar Pacing, And The Bipolar Pacing Lead. N 96 Tissue Stabilizer For Beating Heart N• Should Be A Low Profile Tissue Stabilizer With Auto Spread Feature Of Pods. N 97 Heart Positioner For Beating Heart N• Should Be A Low Profile Positioner For Off Apex Position Use / To Lift The Heart. N 98 Tissue Stabilizer For Minimally Invasive Beating Heart Surgery. N• Should Be Stabilizer To Be Used Via Thoracotomy With Detachable Shaft And Should Have Fully Rotating Pods. N 99 Heart Positioner For Minimally Invasive Beating Heart Surgery N• Should Be A Positioner With Detachable Shaft For Mics Via Thoracotomy. N 100 Mist Blower N• Should Have Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery. Should Have The Malleable Shaft And On / Off Control On The Hand Piece. N 101 Arteriotomyshunts ( Intra Coronary Shunts ) N• Sizes 1.0, 1.25, 1.5, 1.75, 2.0, 2, 5, 2.5, 2.75 & 3.0Mm. N• Should Be Beveled Tip. N• Should Have Fully Transparent Body. N 102 Act Cartridges 103 Specification For Intra Aortic Balloon Catheter N• Iab Catheter Should Be Of 7.5 Fr With Displacement Volume Of 24Cc, 34Cc & 40 Cc. And 8Fr With Volume Displacement 50Cc. N• It Should Be More Abrasion Resistant And Have Good Fatigue Resistance N• Should Immediate Inflate At Start Up Without Manual Filling Of The Catheter. N• It Should Be Compatible With Data Scope / Arrow Pumps N• It Should Have Exact 7.5Fr Size Sheath And Dilator Set. N• It Should Have 0.025 3Mm J Ptfe Stainless Steel Guide Wire. N• Preferably Us Fda Approved. N 104 Emergency Cricothyroidotomy Set : N• Should Have A Conical Introducer, N• Dilators Should Be Made Of Stainless Steel, N• Cricothyroidotomy Tubes Should Be Of Medical Grade Plastic. N• With 15 Mm Connector, Flexible Tube Extension Made Of Silicone, Scalpel, One Way Syringe, Comfort Neck Band N• Sizes 2Mm, 4Mm. N 105 Micro Aggregate Blood Filter For Red Cell Transfusion N• Filter Media Should Be 40 Micron Rated Polyester Screen Media With Uniform Pore Size N• Should Have Total Filter Surface Area Of > 170 Sq.Cm N• Should Have Average Capacity Of Filtering 10 Units Of Blood. N 106 Packed Red Cell & Whole Blood Leucocyte Reduction Filters. Na. Bedside Filtration Of One & Two Unit Of Packed Red Blood Cells Or Whole Blood Nb. Should Have Universal Spike With Microbiological Recovery Vent Nc. Should Be With Attached Straight Administration Set / Automatic Self Leveling Drip Chamber Nd. Performance Should Consistently Average Less Than 2X105 Residual Leukocytes Per Unit Ne. Red Cell Recovery Should Average Greater Than 90%. Nf. Filter Housing Hold Up Volume Should Be <25Ml For One Unit Filter And <35Ml For Two Unit Filter Ng. It Should Be Single Use Nh. Should Be Latex Free N 107 Specification For Forced Warming Blanket N• Should Be Disposable And Two Layered; N• Should Consist Of Non Woven Propylene Fabric For Body Warming. N• Should Be Usable With Forced Air Warming Units. N• Material Should Be Latex Free And Should Meet Flammability Standard 16 Cpr 1610 For Safety. N• The Manufacturer Must Have All The Below Listed Types Of Blankets And Should Quote The Prices Separately For Separate Blankets N? Full Body Adult N? Underbody Adult With Arm And Head Openings N? Pediatric Full Body N? Pediatric Underbody Blanket. N• Should Be Compatible With Common Machines. N• Should Be Ce Certified N 108 Lv Vent: N• Left Ventricular Vent Should Consist Of Round Tipped Dual Lumen Tube With Lateral Eyes, Suture Collars & Proximal Funnel Connectors Used For Emptying The Left Ventricle For Clearer View During Surgery. All Sizes. N 109 Antegradeostialcardioplegia Cannula - All Size: N• Antegrade-Cardioplegia Cannula Should Be Made Of Soft 100% Silicone Conduit With Distal Bulbous End & Should Have Luer Lock Connector At The Proximal End For Administration Of Cardioplegia Solution Into The Coronary Ostia. Sizes: 3.5, 4, 4.5, 5, 5.5, 6 Mm. N 110 Cardioplegia Cannula Size Infant: N• Cardioplegia Cannula Should Be Made Of Soft 100% Silicone & Should Be Tapered Conduit With Distal Open Tip Having Adjacent Lateral Eyes, Followed By A Flange For Secure Positioning. It Should Have Proximal Luer Lock & A Ss Needle With Hub. Size: Infant. N 111 Arterial Cannula For Arch Cannulation Sizes 20Fr -24 Fr. N• Should Have Elongated One Piece Wire Wound Body With Radiopaque Suture Ring And Dilator With Depth Markings. N 112 Axillary Artery One Piece Cannula With Central Arterial Pressure Measurement N• Sizes 18 Fr.-24Fr.Should Have Elongated One Piece Wire Wound Body With Radiopaque Suture Ring And Dilator With Depth Markings. Should Have Integrated Pressure Monitoring Port At Tip N 113 One Piece Pediatric Aortic Cannula Size 6Fr-16 Fr Vented N• Should Be Beveled With Thin Wall Tips And Should Be Elongated One Piece. N 114 Straight Tip Arch Cannula Sizes 8Fr-24 Fr Vented And Non Vented; Pediatric And Adult N• Should Be Beveled Thin Wall Tips Attached To Tapered Cannula Bodies. Should Be Available In Pediatric And Adult Sizes. N 115 Angled Tip Arterial Cannula Sized 8 Fr -24 Fr N• Should Be Beveled Thin Wall Tips Attached To Tapered Cannula Bodies. Should Have Kink Resistant Wire Wound Bodies. N 116 Arterial Cannula Angled With Diffused Flow Tip Sizes 18 Fr-24Fr N• Should Be One Piece Wire Wound Body With Integrated Flutes For Diffused Flow. N 117 Femoral One Piece Arterial And Venous Cannula Kit N• Sizes 8-21 Fr. Arterial And 8-29 Fr. Venous Cannula N• Should Be One Piece Wire Wound Body. N 118 Femoral Multistage Venous Cannula N• Sizes: 29 / 29 / 29 Fr And 29 / 46 / 37 Fr N• Should Be One Piece Wire Wound Multiple Side Holes Body With Percutaneous Kit. N 119 Standard Insertion Kit For Femoral Cannulation 120 Carpentier Bi-Caval Femoral Venous Cannula N• Sizes : 24 / 29 Fr, 30 / 33Fr N• Should Have Wire Wound Kink Resistant Two Stage Design. N 121 Single Stage Venous Cannula With Metal Tip Sizes 12-31 Fr N• Should Have Kink Resistant Wire Wound Taper Body With Beveled Metal Tip. N 122 Single Stage Venous Cannula With Right Angle Sizes 12-40 Fr N• Should Have Kink Resistant Wire Wound Taper Body With Tapered Multiport Tips. Should Be Right Angled With Plastic Tip. N 123 Single Stage Straight Venous Cannula Malleable Sizes 12-40 Fr N• Should Have Kink Resistant Malleable Wire Wound Taper Body With Tapered Multiport Tips. N 124 Double-Stage Venous Cannula Round And Oval Shape Sizes 28 / 36, 36 / 46, 32 / 46, 36 / 51, 32 / 40, 36 / 46 Fr. N• Should Be Two-Stage Cannula With Oval Body In Various Sizes. Should Be Two-Stage Cannula With Round Body In Various Sizes. Should Have Cannula Body With Thin Walled With Depth Markings. N 125 Three Stage Venous Cannula Sizes 29 / 29 / 29 Fr 29 / 46 / 37 Fr N• Should Be Three Stage Venous Cannula For Vacuumassisted Venous Drainage ( Vavd ) / Kinetic Assisted Venous Drainage ( Kavd ) N 126 Multiple Stage Venous Cannula Sizes 23 Fr And 29 Fr N• Should Have Polyurethane Wire Wound Body With Radiopaque Markers And Multiple Holes At Distal End. N 127 Aortic Root Cannula Sizes 4 Fr-11 Fr N• Should Have Radiopaque Tips Attached To Clear Pvc Bodies. Additional Features: Aortic Root Pressure Monitoring And Left Heart Venting. Can Be Used To Aspirate Air Emboli As Well Administer Cardioplegia. N 128 Aortic Root Cannula With Vent Line Sizes 5 Fr-11 Fr N• Should Have Radiopaque Tips Attached To Clear Bodies With Separate Vent Line. N 129 Aortic Root Cannula Pediatric Neonatal Sizes 4 Fr N• Should Be Able To Aspirate Air From Aorta, Should Have Radiopaque Tip And Standard 50.5 In Length Or A Shortened 2.5 In. N 130 Cardiopleiga Needles: Neonatal, Pediatric And Adult Sizes. 5Fr And 8 Fr N• Should Have Stainless Steel Tip With Plastic Depth Stop, Needle Should Be Attached To Flexible Pvc Tubing Which Should Include A Drape Clamp And Female Luer. N 131 Silicon Ostial Cannula For Continuous Perfusion Sizes 15 Fr, 17Fr And 20 Fr N• Should Have A Silicon Body With Soft Bulb Shaped Tips, Should Have A Female Luer Connection Site. N 132 Ostial Perfusion Cannula With Basket Tip And Soft Convex Tip Sizes 10 Fr, 12 Fr And 14 Fr. N N• Should Have Flanged, Radiopaque Basket Tips / Soft Tips Attached To Malleable Stainless Steel Shafts. N 133 Minimally Invasive Aortic Root Cannula With Length More Than 30 Cm N• Should Have More Than 30 Cm Long Body To Allow Insertion During Mics N 134 Minimally Invasive Retrograde Cardioplegia Cannula With Deflecting Tipsizes 13 And 15 Fr N N• Should Have Tip Deflecting Models For Sinus Placement Through Thoracotomy Should Be Able To Allow Minimum 10Mm Sweep. Should Be Auto / Manual Inflatable. N 135 Retrograde Cardioplegia Cannula With Auto Inflate Sizes 13 Fr And 15 Fr N• Should Have Silicon / Pvc Bodies With Auto Inflatable Cuff And Pressure Monitoring Lines; Should Have Multiport Tip / Integral Stopcock. N 136 Multiple Perfusion Set N• Should Be Able To Allow Simultaneous Perfusion Of The Aortic Root And Up To Three Or More Vein Graftsshould Have Inlet Ports With Male Or Female Luer And Clamps Attached To An Adapter That Can Split Into Four Or More Legs. N 137 Distal Perfusion Kit N• Should Be Able To Perform Simultaneous Perfusion Of Aortic Root And Upto 3 Or More Vein Grafts. N 138 Left Heart Vent Catheters Sizes 10 Fr, 13Fr, 15Fr, 16Fr, 18Fr, 20Fr, 24Fr N• Should Be Of Pvc Or Silicon, Could Be Used For Direct And Indirect Venting, Should Have Perforated Tip, Malleable Bodies With Depth Mark. Should Have A Choice Of Either Pvc Or Silicone Along With Straight Body With Depth Marking. All Ventsshould Terminate With A Vented Or Non Vented ¼ In Connector. N 139 Pericardial Sumps Sizes 20 Fr N• Should Feature A Fluted Tip, Should Be Encased In A Stainless Steel Spring And Should Have Weight At The End. N 140 Intra-Cardiac Sump Size 20 Fr N• Should Feature A Perforated Pool Tip To Maximize Suction And Minimize Tissue Trauma. The Tip Design Should Be Ideal For Atraumatic Suction Within The Heart Chambers. N 141 Suction Tube Sizes 6 Fr, 10Fr And 20 Fr N• Should Have Variety Of Cardiac Suction Tubes, Intracardiac Suction Tubes & Rigid Suction Tubes. N 142 Micro Suction Tubes Sizes 9 Fr N• Should Have A Vacuum Control Port, Malleable Shaft, Should Equipped With A Length Of Tubing And Clamp Terminating With A ¼ In ( 0.64Cm ) Connector. N 143 Macro Rigid Suction Tubes Sizes 20 Fr N• Should Have Tip Made Up Of Stainless Steel, Should Have Fluted Pool Tip To Maximize Suction And Minimize Tissue Trauma, Should Offer Gentle Suction. N 144 Pa Vent Cannula N• Should Have A Soft, Pliable Tip With Female Luer End; Should Have Movable Depth Marker And An Introducer Needle Should Be Included. N 145 Tourniquet Sets Sizes 12 Fr, 16 Fr And 19 Fr. N• Should Have Color Coded Tubes With Varying Lengths For Adults And Pediatric, Should Have Wire Snares Included With The Tube Set. N 146 Arteriotomy Cannula Sizes 2Mm, 3Mm, 4Mm, 5Mm, 6Mm N• Should Have Polyurethane Tube With A Bulb Shaped Tip Connected To Winged Female Luer. N 147 Rapid Priming Set Length 35Cm And 40Cm N• These Should Facilitate The Transfer Of Fluid During The Priming Of The Circuit. Should Have Large Bore Spikes Attached To Flexible Tubing With A Clamp. Should Terminate With Either An Open End Tube Or A Male Luer. N 148 Rapid Priming”Y” Set Length Around 1 M N• These Should Facilitate The Transfer Of Fluid During The Priming Of The Circuit. Should Have Large Bore Spikes Attached To Flexible Tubing With A Clamp. Should Attach To A “ Y” Adapter With A Length Of Tubing And Another Clamp. N 149 Specification For Adult Oxygenator Npriming Volume Should Be Less Than 300 Ml. Nblood Flow Range Should Be 0-7Lts / Min. Noxygen Transfer Should Be Atleast 400Ml / Min. Nheat Exchange Efficiency Should Not Be Less Than 0.50. Nhousing Material Should Be Of Polycarbonate. Nsurface Area Of The Fibers Should Be From 1.4M2to 2.4M2 Nheat Exchanger Should Be Made Of Stainless Steel And Surface Area Should Be Approx.0.40 M2 Nblood Inlet Port ( From Pump ) - 3 / 8 Nblood Outlet Port - 3 / 8 Ncardioplegia Port - ¼ Ngas Inlet Port - ¼ Ngas Outlet Port - ¼ Nwater Ports - ½ Nmaximum Pressure - Blood Inlet 1000Mmhg, Water Inlet 42 Psi N• Blood Storage Capacity Of Hard Shell Reservoir Should Be Approx. 4000Ml Or More. N• Minimum Operating Volume Of Reservoir Should Be 200Ml. N• Hard Shell Reservoir Should Have Cardiotomy Filter And De-Foaming Part N• Hard-Shell Reservoir Should Have Venous Filter With Pore Size 452Mm N• The Hard-Shell Reservoir Should Have Nvenous Blood Inlet Port - ½ Nblood Outlet Port ( To Pump ) - ? Nsuction Ports ( Six ) - ¼ Nvertical Port To Cr Filter- ¼ Nquick Prime Port - ¼ Nauxiliary Port - ¼-? N• Sustainable Negative Pressure Should Be 15010Mmhg N 150 Speicification For Pediatric Oxygenator Npriming Volume Should Beless Than 150Ml. Nblood Flow Range Should Be 0.40.01Ltrs / Min. Noxygen Transfer Should Not Be Less Than 250Ml / Min. Npressure Drop Should Be Least-Up To 100Mmhg Or Less. Nheat Exchange Efficiency Should Not Be Less Than 0.65. Nhousing Material Should Be Of Polycarbonate. Nsurface Area Of The Fibers Should Be Approx 1.0M2. Nheat Exchanger Should Be Made Of Stainless Steel And Surface Area Should Be Approx 1300Cm2. Nblood Inlet Port - 3 / 8 Nblood Outlet Port - 3 / 8 Ncardioplegia Port - ¼ Ngas Inlet Port - ¼ Ngas Outlet Port - ¼ Nwater Port - ½ Nmaximum Pressure - Blood Inlet 1000Mmhg, Water Inlet 42 Psi N• Blood Storage Capacity Of Hard Shell Reservoir Should Be Max 3000Ml. N• Minimum Operative Volume Of Hard Shell Reservoir Should Be 100Ml. N• Hard-Shell Reservoir Should Have Cardiotomy Filter And Defoaming Part. N• Hard-Shell Reservoir Should Have Venous Filter With Pore Size Should Be 20Mm N• The Hard-Shell Reservoir Should Have N• Venous Blood Inlet Port - 3 / 8 Rotatable N• Blood Outlet Port ( To Pump ) - 3 / 8 N• Suction Port ( Six ) - ¼ N• Vertical Port To Cr Filter - 3 / 8 N• Quick Prime Port - ¼ N• Auxiliary Port - 3 / 8 N 151 Specification For Neonatal Oxygenator Nblood Flow Range Should Be 0.1 – 2 Liters / Min. Npriming Volumes Should Be Around 40 Ml. Noxygen Transfer Should Be Minimum 100 Ml / Min. Npressure Drop Should Be Least Up To 100Mmhg Or Less. Nheat Exchange Efficiency Should Not Be Less Than 0.65. Nhousing Material Should Be Of Polycarbonate. Nsurface Area Of The Fibers Should Be ˜0.5M2 And Material Should Be Micro Porous Polypropylene. Nheat Exchanger Should Be Made Of Stainless Steel And Surface Area Should Be Approx 0.035M2. Nblood Inlet Port ( From Pump ) - ¼ Nblood Outlet Port - ¼ Nluer Port ( For Recirculation Or Blood Cardioplegia ) One Luer Lock On Blood Outlet Ngas Inlet Port - ¼ Ngas Outlet Port - 5 / 16 Nwater Ports - ½ Nmaximum Pressure - Blood Inlet 1000Mmhg, Water Inlet 2Kgf / Cm2 Nblood Storage Capacity Of Hard Shell Reservoir Should Be 1000Ml N• Minimum Operating Volume Of Hard-Shell Reservoir Should Be 15Ml N• Hard-Shell Reservoir Should Have Cardiotomy Filter And Defoamer N• The Hard-Shell Should Have N• Venous Blood Inlet Port - ¼ N• Blood Output Port ( To Pump ) - ¼ N• Suction Port ( Five ) - 3 / 16 N• Quick Prime Port - ¼ N• Vent Port - ¼ N• Auxiliary Port - ¼-3 / 8 Nmaximum Sustainable Negative Pressure In Reservoir -150Mmhg N 152 Specifications For Pediatric Arterial Filter With Bypass Loop Nthe Arterial Filter Should Be For Pediatric Use. Npriming Volume Should Not Be More Than 90Ml Nfilter Pore Size Should Be 40 Micron. Nthe Outlet And Inlet Blood Posts Should Be 3 / 8. Purge Line ( One Way Valve ) Nthe Filter Should Allow Maximum Blood Flow Rate Of 5.0L / Min. Nthe Filter Should Be Provided With A Bypass Loop At The Inlet And Outlet Port. N 153 Specifications For Cardioplegia Heat Exchanger ( Bcd ) Nit Should Have Priming Volume Less Than 50 Ml. Nblood Flow Rate Should Be Between 0-600 Ml / Min Nfilter Screen Should Be Around 100 Um. Ninlet Connection Should Be ¼And Outlet Connection Should Be 3 / 16. Nheat Exchange Surface Area Should Be ˜.20M2. Nheat Exchange Should Be Of Stainless Steel Corrugated Pipes. Nbubble Trap Should Be Integrated For Highly Efficient De-Bubbling Nintegrated By Pass Manifold For Easy De-Bubbling Nexchangeable Water In / Water Out Nblood Flow Path Bottom Up Nit Should Have A Stopcock Prime / Perfusion For Easy Priming. Nit Should Have Tip In The Surgeon Pack So That It Can Be Connected To Cardioplegia Cannula. Nit Should Be Available Both In 4:1 And 1:4 Configurations. N 154 Specification For Pedaitric Hemoconcentrator Nit Should Have Priming Volume Approx 35Ml. Neffective Surface Area Of The Fibers Should Be Approx 0.5M2. Nblood Port Should Be ¼With Luer Locks. Nfiltrate Port Should Be ½. Nmaximum Trans-Membrane Pressure Should Be 500Mm Hg. Nit Should Have Tubing Lines Along With Reservoir Bag. N 155 Specification For Adult Hemoconcentrator Nthe Priming Volume Should Be 70 Ml Neffective Surface Area Of The Fibers Should Be ˜1M2. Nblood Port Should Be ¼ With Luer Locks Nfiltrate Port Should Be ½ ( 1 / 4Adapter ) . Nblood Flow Range Should Be 100-500Ml. Nmaximum Trans-Membrane Pressure Should Not Be More Than 500Mm Hg. Nit Should Have Tubing With Reservoir Bag. N 156 Specification For Neonatal Hemoconcentrator Nit Should Have Priming Volume Less Than 20 Ml. Nmembrane Surface Area Should Be ˜0.2M2. Nmax Membrane Pressure Should Not Be More Than 600Mm Hg. Ncapillary Wall Thickness Should Be ˜50Um. Nit Should Have Inlet / Outlet Lines, Male Luer Lock Connections, Filter Safety Cap, Filtrate Line And Additional Filtrate Bag ( 200Ml ) . N 157 Specification For Custom Tubing Pack Ncustom Tubing Pack Adult. Ncustom Tubing Pack With Arterial Filter With Pvc Tubing Medical Grade -6 As Per Aiims C.N.Centre Design. Nfilter / Tubing Should Be Ce / Usfda Approved., Purge Line. ( One Way Valve ) N• Custom Tubing Pack Pediatric With Pvc Tubing Medical Grade – 6Filter / Tubing Should Be Ce / Us Fda Approved N• Custom Tubing Pack With Neonatal Arterial Filter With Pvc Tubing Medical Grade-6Filter / Tubing Should Be Ce / Usfda Approved N• Custom Tubing Packs With 3 / 16Arterial And ¼ Venous Lines For Small Neonates. Made From Medical Grade-6 Pvc. Filter / Tubing Should Be Ce / Usfda Approved N 158 Extra Corporeal Membrane Oxygenator ( Neonatal ) Necmo Should Have A Validation For 14 Days And Should Be Phthalate Free ( No Dop ) . Nmembrane Used Should Be Of Polymethylpentene Fibers. Npriming Volume Should Be 100 Ml. Nshould Have Contact Surface Area ˜0.70 Square Meters. Nshould Cater For Blood Flow From 0.2 To 1.5 L / Min. Nheat Exchanger Surface Area Should Be ˜0.4 Square Meter. Nheat Exchanger Performance Factor Should Be Of 0.77 ( 1.5 Liter / Min ) . Noxygenator And Tubing Should Have Coating Of Phosphorylcholine. Ninlet And Outlet Connector Preferred Is 1 / 4 ( 6.35 Mm ) . N 159 Extra Corporeal Membrane Oxygenator ( Paediatric ) Necmo Should Have A Validation For 14 Days And Should Be Phthalate Free ( No Dop ) . Nmembrane Used Should Be Of Polymethylpentene Fibers. Nshould Have Priming Volume 200 Ml. Nshould Have Contact Surface Area Of Around1.4 Square Meters. Nshould Cater For Blood Flow From 0.3 To 4 Liter / Min. Nheat Exchanger Should Have Surface Area Of ˜0.8 Square Meter. Nheat Exchanger Per-Formance Factor Should Be Of ˜0.6 ( @ 4 Liter / Min ) . Noxygenator And Tubing Should Have Coating Of Phosphorylcholine ( Pc ) . Ninlet And Outlet Connections Preferred Is 3 / 8 ( 9.53 Mm ) N 160 Extra Corporeal Membrane Oxygenator ( Adult ) Necmo Should Have A Validation For 14 Days And Should Be Phthalate Free ( No Dop ) . Nmembrane Used Should Be Of Polymethylpentene-Fibers. Nshould Have Priming Volume Of˜200Ml. Nshould Have Contact Surface Area Of 1.7-1.9 Square Meters. Nshould Cater For Blood Flow From 4 To 7 Liters / Min. Nheat Exchanger Should Have Surface Area Of ˜0.8Square Meter. Nheat Exchangerperfor-Mance Factor Should Be ˜0.6 ( @ 4 Liters / Min ) . Noxygenator And Tubing Should Have Coating Of Phosphorylcholine. ( Pc ) Ninlet And Outlet Connections Preferred Is 3 / 8 ( 9.53 Mm ) N 161 Specification For Adult Oxygenator ( Integrated With Arterial Filter & Heat Exchanger ) N• Oxygenator Should Have Integrated Arterial Filter With Cardiotomy / Venous Reservoir. Nshould Have Integrated Arterial Filter With Self Venting Technology. Nheat Exchanger Surface Area Should Be No More Than 0.2M2. Nvenous Filter Should Be 50Micro Meter. Npriming Volume Should Not Be More Than 250Ml. Nblood Flow Range Should Be 0.5 To 7 Lpm. Nheat Exchange Efficiency Should Not Be Less Than 0.50 At Max Flow. Npressure Drop Should Be Minimum Up To 110 Mmhg Or Less. Narterial Filter Should Be 35Micron Meter. Nmembrane Surface Area Should Be 2-2.5 M2. N 162 Specification For Small Adult Oxygenator ( Integrated Filter And Heat Exchanger ) Noxygenator Should Have Integrated Arterial Filter With Cardiotomy / Venous Reservoir. Nshould Have Integrated Arterial Filter With Self Venting Technology. Nheat Exchanger Surface Area Should Be No More Than 0.14M2. Nvenous Filter Should Be 50Micro Meter. Npriming Volume Should Not Be More Than 150Ml Nblood Flow Range Should Be 0.5 To 5 Lpm. Nheat Exchange Efficiency Should Not Be Less Than 0.5 Max Flow @ 5 Lpm Npressure Drop Should Be Minimum Up To 110 Mmhg Or Less. Narterial Filter Should Be35micro Meter. N 163 Specification For Paediatric Infant Oxygenator ( Integrated Filter And Heat Exchanger ) Noxygenator Should Have Integrated Arterial Filter With Cardiotomy / Venous Reservoir. Nshould Have Integrated Arterial Filter With Self Venting Technology. Nheat Exchanger Surface Area Should Be No More Than 0.035M2. Nvenous Filter Should Be50micro Meter. Npriming Volume Should Not Be More Than 45Ml. Nblood Flow Range Should Be 0-2.5Ltrs / Min. Nheat Exchange Efficiency Should Not Be Less Than 0.6 At Max Flow. Npressure Drop Should Be Minimum Up To 100Mmhg Or Less @ 1.5 Lpm Narterial Filter Should Be35micro Meter. N 164 Arterial Perfusion Cannulaeadult. N• Non-Wire Reinforced Beveled Tip Size 18Fr, 20Fr, 22Fr And 24 Fr. Overall Lengthshould Be Approx.15Cm With Suture Bump. N 165 Arterial Perfusion Cannulae Pediatric N• Sizes: 8Fr, 10Fr, 12Fr, 14Fr And 16Fr. N• Non Wire Reinforced Bevel Tip. N• Overall Length 18Cm With Suture Bump. N 166 Venous Cannulae Single Stage. ( Neonate ) N• Thin Flexible Wire Reinforced Straight Open Light House Tip. Overall Length Approx.28Cm With ¼ Acceptance Size 12Fr, 14Fr And 16Fr N 167 Venous Cannulae Single Stage ( Pediatric ) N• Thin Flexible Wire Reinforced Straight Open Light House Tip. Overall Length Approx. 35Cm With ¼And 3 / 8 Acceptance Size 18Fr, 20Fr, 22Fr And 24Fr. N 168 Venous Cannulae Single Stage ( Small Adult ) N• Thin Flexible Wire Reinforced Straight Open Lighthouse Tip. Overall Length 35Cm With 3 / 8 Acceptance Size 26Fr And 28Fr. N 169 Venous Cannulae Single Stage ( Adult ) N• Thin Flexible Wire Reinforced Straight Open Lighthouse Tip. Overall Length Should Be Approx.40Cm With 3 / 8 Acceptance Size 30Fr, 32Fr, 34Fr, 36Fr, 38Fr And 40Fr. N 170 Venous Cannulae Right Angled N• Wire Reinforced 900 Angled Plastic Tip 10Fr, Overalllength Approx.28Cm And ¼ Acceptance. N 171 Venous Cannulae Right Angled N• Wire Reinforced 900 Angled Plastic Tip 12Fr, 14Fr And 16Fr. Overall Length Should Be Approx. 33Cm With ¼& 3 / 8 Acceptance N 172 Venous Cannulae Right Angled N• Wire Reinforced 900 Angled Plastic Tip 18Fr And 20Fr. Overall Length Should Be Approx. 35Cm With 3 / 8 Acceptance N 173 Venous Cannulae Right Angled N• Wire Reinforced 900 Angled Plastic Tip 22Fr, 24Fr And 28Fr. Overall Length Should Be Approx.38Cm With 3 / 8 Acceptance. N 174 Retrograde Cannula Catheter N• Self-Inflating Smooth Balloon With Preshapedstylet And Handle 14Fr. Overall Length Should Be Approx. 27Cm & Should Have 18-20 Mm Sized Smooth Balloon. N 175 Aortic Perfusion Cannulae; N• Wire Reinforced Dispersion Tip Sizes: 21Fr And 24Fr Overall Length Approx.35Cm And Vent. N 176 Dual Stage Venous Cannulae; N• Wire Reinforced 32 / 40Fr And 36 / 51Fr. Overall Length Should Be Approx. 40Cm And ½Acceptance. N 177 Femoral Arterial Cannulae; N• Wire Reinforced Overall Length Should Be 19.5.2 Cm With ¼ Vented Connector Sizes: 8Fr, 10Fr, 12Fr And 14Fr. N 178 Femoral Arterial Cannulae; N• Wire Reinforced Overall Length Should Be Approx. 24Cm With 3 / 8 Vented Connector Sizes: 16Fr, 18Fr And 20Fr. N 179 Femoral Venous Cannulae; N• Wire Reinforced Overall Length Should Be Approx. 24Cm With ¼ Non Vented Connector.Sizes 8Fr, 10Fr, 12Fr And 14Fr. N 180 Venous Femoral Cannulae; N• Wire Reinforced Overall Lengthshould Be 752 Cm With 3 / 8 Non Vented Connector Sizes 18Fr, 20Fr, 22Fr, 24Fr And 28Fr. N 181 Antegrade Cardioplegia Cannulae N• 12 / 14 / 16 Fr. With Vent And Without Vent. N 182 Cardiotomy Venous Reservoir Adult, Paediatric, Neonatal 183 Disposable Connector All Sizes; Y, Straight With And Without Leur Lock 184 Disposable Single Tubing All Sizes ( ½, ?, ¼, 3 / 16 ) 185 Wire Enforced Arterial Cannula ( 6 Fr To 20 Fr ) 186 Pruitt ( Distal Limb Arterial Perfusion Cannula ) 187 Long, Flexible, Wire-Enforced Cannula For Ascending Aortic & Arch Cannulation With Obturator 188 Long Flexible, Wire-Enforced Cannula For Ascending Aorta & Arch Cannulation With Guide Wire. 189 Long Flexible Wire Enforced Cannula For Ascending Aorta And Arch Cannula Angled With Side Holes. 190 Balloon Tip Antegrade Cerebral Perfusion Cannula. 191 Group C: Valves And Rings 192 Complete Bovine Aortic Pericardial Valve N• Should Be Bio Engineered, Computer Optimized To Ensure Uniform Thickness Of Leaflets And Have Tissue Deflection Test To Ensure Uniform Flexibility In All Three Leaflets. . Long Term Clinical Data Should Be Available, Establishing More Than At Least 5 Years Expected Durability In Clinical Study, Long Term Follow Up Data On Hemodynamic Performance Establishing Consistency In Low Gradients. Should Have Standard Low-Pressure Fixation &Adequate Treatment Of Tissues To Preserve Natural Leaflet Dimensionality & Flexibility, While Extracting Phospholipids. Should Have More Than 20 Yrs. Experience Globally. Scalloped Sewing Ring For Aortic Annulus Conformity Is Preferable. N• Aortic Sizes 19 / 21 / 23 / 25 / 27 N• Should Beus Fda Approved N 193 Complete Bovine Mitral Pericardial Valve N• Bio- Engineered: Computer Optimized To Ensure Uniform Thickness, With Tissue Deflection Tests To Ensure Uniform Flexibility In All Three Leaflets, Unique Design Mounting Feature Such As Flexible Stent& Optimal Tissue Stent Compatibility For Greater Reliability. Long Term Clinical Data Available, Establishing More Than & Consistency In Hemodynamic Performance. Low-Pressure Fixation & Chemical Treatment Of Tissue To Preserve Natural Leaflet Dimensionality & Flexibility, While Extracting Maximum Phospholipids. Should Have More Than 20 Yrs Experience Globally. Should Have Convenient Deployment And Lvot Markers For Ease Of Implantation At Mitral Position. N• Mitral Size 25 / 27 / 29 / 31 / 33 N• Preferably Fda Approved N 194 Complete Bovine Mitral Supra Annular Pericardial Tissue Valve. N• Bio Mechanically Engineered Tissue Valve With Three Leaflets Of Identical Thickness, And Identical Flexibility. Should Be A True Supra Annular Valvewith A Saddle Shaped Sewing Ring With Posterior Flexibility & Anterior Rigidity For Optimal Conformity At Mitral Position, Should Have Lvoto Markers For Correct Orientation, Preventing Any Lvot Obstruction, With Convenient Deployment System To Prevent Suture Looping And Ease Of Deployment. N• Low Profile Tissue Valve With Asymmetrical Sewing Ring Should Preserve Sub Valvularapparatus And Prevent Lv Impingement. Should Have Tissue Treatment To Irreversibly Extract Both Calcium Binding Sites Phospholipids, Residual Glutraldehyde, Should Have A Flexible Stent & Optimal Tissue Stent Compatibility For Greater Reliability. Clinical Data To Be Available Establishing Long Term Durability And Consistency In Hemodynamic Performance. N• Sizes: 25 To 33Mm N• Preferably Fda Approved N 195 Complete Bovine Aortic Supra Annular Pericardial Tissue Valve N• Bio-Mechanically Engineered Tissue Valve With Three Leaflets Of Identical Thickness And Identical Flexibility. Should Be A True Supra Annular Valve. Scallop Shaped Sewing Ring For Aortic Position.Should Be Low Profile Tissue Valve. Should Have Tissue Treatment To Irreversibly Extract Both Calcium Binding Sites Phospholipid, And Residual Glutraldehyde, Should Have Flexible And Durable Stent. Short Term And Long Term Clinical Data Should Be Available, Establishing Durability & Consistency In Hemodynamic Performance. Should Have A Sizer ( Barrel And Replica End ) For Optimum Sizing And Placement. N• Size 19 To 29Mm N• Preferably Fda Approved N 196 Complete Bovine Pericardial Low Profile Aortic Tissue Valve. N• Bio-Mechanically Engineered Tissue Valve With Three Leaflets Of Identical Thickness, And Identical Flexibility. N• Should Be A True Supra Annular Valve. N• Should Have A Scallop Shaped Sewing Ring Consistent With Aortic Annulus. N• Should Have Tissue Treatment To Irreversibly Extract Both Calcium Binding Sites Phospholipid Residual Glutraldehyde, N• Should Have A Flexible Stent & Optimal Tissue Stent Compatibility For Greater Reliability. N• Short And Long Term Clinical Data Should Be Available, Establishing Durability & Consistency In Hemodynamic Perfor-Mance. N• Should Have Low Profile Height For Optimizing Coronary Ostial&Sino-Tubular Junction Clearance. Should Have Three Mid Commissure Markers For Correct Orientation Of The Valve. N• Should Have A Slick Stent Post & Stent Base Allowing Ease Of Implantation In Small Aortic Root. N• Sizes: 19 / 29Mm N• Preferably Fda Approved N 197 Tricuspid Repair Ring N• Sterile Double Packed Tricuspid Rigid Ring With An Anterior Gap With Polyester Of Ptfe Cloth With Marking For Commissures. N• Should Have An Oval Shape And Opening For Av Node. N• Sizes 26Mm 28Mm 30Mm 32Mm. N 198 Mitral Repair Ring N• Sterile Double Packed Rigid Ring Complete Or With Anterior Gap With Polyester Or Ptfe Cloth With Marking For Commissures. N• Kidney Shaped For Mitral Position. N• Cover Sizes 26Mm, 28Mm, 30Mm, 32Mm, And 34Mm. N 199 Imr Annuloplasty Ring: N• Should Have A Complete Rigid Ring. N• To Be Constructed Of A Strong, Durable Alloy. N• Should Have A Increased Sewing Margin In The P2-P3 Region, N• Should Be Marked With Suture And Designed To Accommodate A Double Suture Row. N• Should Have A Dipped P3 Region To Accommodate Higher Stresses From Downward Lv Displacement. N• Should Have A Convenient Holder / Handle To Increase Ease Of Use & Operative Efficiency N• Sizes 24, 26, 38, 30, 32Mm N• ?Preferably Fda Approved N 200 3-D Tricuspid Annuloplasty Ring: N• Should Be A Rigid Annuloplasty Ring With Three-Dimensional Shape And With An Incomplete Ring Shape To Avoid The Sensitive Conduction System. N• Should Have A Downward Angle In Septal Region To Help Reduce The Stress On Sutures And The Risk Of Ring Dehiscence. N• Sizes 26, 28, 30, 32, 34Mm. N• Preferably Fda Approved. N 201 Artificial Mechanical Heart Valve Bileaflet / Monoleaflet Mitral N• Rotatable Design, Leaflets Made Up Of Pyrolytic Carbon / Standard Durable Alloy And Polyester Sewing Cuff. N• Should Have Low Profile Height. N• Should Have Minimum Vertical Leaflet Exposure To Result In No Lvot Obstruction N• Should Have Greater Posterior Wall Clearance N• Wide Range Of Sizes From 23 / 24Mm – 34 / 37Mm N Should Be Us Fda / Ce Approved. N 202 Artificial Mechanical Heart Valve Bileaflet / Monoleaflet Mitral ( For Supra-Annular Implant ) N• Rotatable Design, Leaflets Made Up Of Pyrolytic Carbon / Standard Durable Alloy And Polyester Sewing Cuff. N• Should Have Low Profile Height. N• Should Have Minimum Vertical Leaflet Exposure To Result In No Lvot Obstruction N• Should Have Greater Posterior Wall Clearance N• Wide Range Of Sizes From 24 Mm – 34 Mm N 203 Artifical Heart Valve Bileaflet Aortic N• Rotatable Design, Leaflet Made Up Of Pyrolytic Carbon And Polyester Sewing Cuff, With Pivot Guard Design. N• Should Have Low Profile Height. N• Should Have Minimum Vertical Leaflet Exposure. N• Wide Range Of Sizes From 19Mm-31Mm. N• Should Be Ce / Fda Approved N 204 Artifical Heart Valve Bileaflet Aortic For Supra-Annular Implant N• Rotatable Design, Leaflet Made Up Of Pyrolytic Carbon And Polyester Sewing Cuff, With Pivot Guard Design. N• Should Have Low Profile Height. N• Should Have Minimum Vertical Leaflet Exposure. N• Wide Range Of Sizes From 16 Mm- 28Mm. N• Should Be Ce / Fda Approved N 205 Artifical Heart Valve Bileaflet Aortic ( For Supra-Annular –Intra-Annular Implant ) N• Rotatable Design, Leaflet Made Up Of Pyrolytic Carbon And Polyester Sewing Cuff, With Pivot Guard Design. N• Should Have Low Profile Height. N• Should Have Minimum Vertical Leaflet Exposure. N• Wide Range Of Sizes From 17Mm- 25Mm. N• Should Be Ce / Fda Approved N 206 Bileaflet Aortic Valve With Conduit N• Should Have Double Velour Woven Graft. N• Should Be Collagen Impregnated To Control Hemostasis And Reduce The Hemorrhagic Complications. N• Should Have Mechanical Heart Valve With Low-Pressure Gradients. With Pivot Guard Design And Leaflet Opening And >75 Degrees. N• Cuff Design Should Enhance Implantability. N• Should Have Minimum Taper Conduit To Facilitate Strong Coronary Anastomosis. N• Should Not Have Any Pleats To Allow Easier Positioning And Attachment Of The Coronary Arteries. N• Wide Range Of Sizes From 19Mm- 33Mm. N• Preferably Have Ce / Fda Approval. N 207 Porcine Tissue Heart Valve Mitral / Aortic N• Should Have Stented, Triple Composite Design With Separate Porcine Leaflets To Optimize Leaflets Cooptation And Reduce Stress. N• Should Have Anti-Calcification Treatment To Reduce Calcification. N• Low Profile Height. N• In Aortic Position Should Be Available In Sizes 19Mm-31Mm. N• In Mitral Position Should Be Available In Sizes 25Mm To 33Mm. N• Preferably Ce / Fda Approval. N 208 Pericardial Externally Mounted Tissue Heart Valve ( Aortic ) N• Should Have Stented, Pericardial Single Layered Leaflet Externally Mounted To Optimize Hemodynamics. Should Have Tissue To Tissue Interface Adding To Durability. N• Should Have Anti Calcification Treatment To Reduce Calcification. N• Supra Annular Design. N• In Aortic Position Should Be Available In Sizes 19Mm-29Mm. N• Preferably Ce / Fda Approval. N 209 Annuloplasty Rings Mitral N• Titanium Alloy Core With Polyester Woven Cloth. N• 3 D Motion. N• Should Have Both Ce And Fda Approval. N• Wide Range Of Sizes 24Mm- 34Mm. N 210 Annuloplasty Ring Flexible N• Fully Flexible Ring / Band. N• Should Have X-Ray Visibility. N• Should Have Both Ce And Fda Approval. N• Wide Range Of Sizes - 25Mm-35Mm N 211 Rigid Remodeling Ring For Mitral Valve Repair N• Size 24Mm, 26Mm, 28Mm, 30Mm, 32Mm, 34Mm, 38Mm, 40Mm N• Should Be Fully Rigid Remodeling Ring. N• Should Have Physiologic Mitral Valve Shape. N• 25% Annular Height To Commissural Width Ratio Anterior, 15% Annular Height To Commissural Width Ratio Posterior. N• Should Have Saddle Shape And Polyester Knit Covering With Titanium / Silicone Core. N 212 Annuloplasty Ring For Tricuspid Valve Repair N• Low Profile Ring, N• Sizes 26Mm, 28Mm, 32Mm, 34Mm, 36Mm N• Should Be Incomplete Ring To Avoid Interference In Conduction System, Height Should Be Less Than 3.5Mm. N• Should Have Titanium Core Encapsulated With Silicone And Covered With Polyesterfabric. N• Septal Lateral Compression. N 213 Composite Annuloplasty Ring For Mitral Repair N• Sizes 24Mm, 26Mm, 28Mm, 30Mm, 32Mm, 34Mm, 36Mm, 38Mm N• Should Have Semi Rigid Posterior Remodeling With Anterior Flexibility, N• Should Have Polyester Knit Covering With Mp-35N / Silicone Core N 214 Group D: Vascular Grafts And Patches 215 Dacron Straight Woven Grafts 6Mm To 16 Mm, 30-35 Cm Long, Collagen Coated. 216 Dacron Straight Woven Grafts 18Mm To 28 Mm, 30-35 Cm Long, Collagen Coated. 217 Dacron Straight Woven Grafts 30Mm To 38 Mm, 30-35 Cm Long, Collagen Coated. 218 Dacron Straight Woven Grafts 6Mm To 16 Mm, 60-70 Cm Long, Collagen Coated. 219 Dacron Straight Woven Grafts 18Mm To 28 Mm, 60-70 Cm Long, Collagen Coated. 220 Dacron Straight Woven Grafts 30Mm To 38 Mm, 60 Cm-70 Long, Collagen Coated. 221 Dacron Bifurcated Woven Grafts 12Mmx6 Mm, 14Mmx7mm, 16Mmx8mm, . 18Mm X9mm With 40-50 Cmslength, Collagen Coated. 222 Knitted Dacron Straight Graft 6Mm To 16 Mm With 30-35 Cm Length, Collagen Coated. 223 Knitted Dacron Straight Graft 18Mm To 24 Mm With 30-35 Cm Length, Collagen Coated. 224 Knitted Dacron Straight Graft 6Mm To 16 Mm With 60-70 Cm Length, Collagen Coated. 225 Knitted Dacron Straight Graft 18Mm To 24 Mm With 60-70 Cm Length, Collagen Coated. 226 Dacron Bifurcated Knitted Grafts 12Mmx6 Mm, 14Mmx7mm, 16Mmx 8Mm, . 18Mm X 9Mm With 40-50 Cms Length 227 Dacron Woven 3 Branch Arch Grafts 20Mm To 34 Mm, Collagen Coated. 228 Dacron Woven 4 Branch Arch Grafts 20Mm To 34 Mm, Collagen Coated. 229 Dacron Woven Thoraco-Abdominal Grafts 20Mm To 30Mm, Collagen Coated. 230 Dacron Woven Graft 20 To 34Mm With 8Mm And 10 Mm Perfusion Side Branch, 40-50 Cm Length, Collagen Coated. 231 Dacron Woven Extra Length Graft With Offset Branch Graft 22 To 32 Mm With 8Mm Perfusion Side Branch, Collagen Coated. 232 Dacron Woven Pre-Curved Graft 22 Mm To 32 Mm With 8Mm Perfusion Side Branch, Collagen Coated. 233 Woven Trifurcate 12Mm X 6Mm X 6Mm, 14 Mm X 7Mm X 7Mm, 16Mm X 8Mm X 8Mm, 40-50 Cm In Length, Collagen Coated. 234 Dacron Knitted Axillo-Bifemoral Bifurcated Graft With Extended Support, Collagen Coated. 235 Dacron Knitted Axillo-Bifemoral Graft 90 Degrees Angle With 60 Cm Side Branch 8Mm And 10 Mm, Collagen Coated. 236 Dacron Knitted Femoral-Femoral Grafts 6Mm And 8 Mm 30Cm And 40 Cm Long, Collagen Coated. 237 Dacron Knitted Straight Peel Able Support 6Mm, 8Mm And 10 Mm, Collagen Coated. 238 Dacron Straight Woven Grafts 6Mm To 16 Mm, 30-35 Cm Long , Gelatin Coated. 239 Dacron Straight Woven Grafts 18Mm To 28 Mm, 30-35 Cm Long, Gelatin Coated. 240 Dacron Straight Woven Grafts 30Mm To 38 Mm, 30-35 Cm Long, Gelatin Coated. 241 Dacron Straight Woven Grafts 6Mm To 16 Mm, 60-70 Cm Long, Gelatin Coated. 242 Dacron Straight Woven Grafts 18Mm To 28 Mm, 60-70 Cm Long, Gelatin Coated. 243 Dacron Straight Woven Grafts 30Mm To 38 Mm, 60 Cm-70 Long, Gelatin Coated. 244 Dacron Bifurcated Woven Grafts 12Mmx6 Mm, 14Mmx7mm, 16Mmx 8Mm, . 18Mm X9mm With 40-50 Cms Length, Gelatin Coated. 245 Knitted Dacron Straight Graft 6Mm To 16 Mm With 30-35 Cm Length, Gelatin Coated. 246 Knitted Dacron Straight Graft 18Mm To 24 Mm With 30-35 Cm Length, Gelatin Coated. 247 Knitted Dacron Straight Graft 6Mm To 16 Mm With 60-70 Cm Length, Gelatin Coated. 248 Knitted Dacron Straight Graft 18Mm To 24 Mm With 60-70 Cm Length, Gelatin Coated. 249 Dacron Bifurcated Knitted Grafts 12Mmx6 Mm, 14Mm X 7Mm, 16Mmx 8Mm, .18Mm X 9Mm With 40-50 Cms Length, Gelatin Coated. 250 Dacron Woven 3 Branch Arch Grafts 20Mm To 34 Mm, Gelatin Coated. 251 Dacron Woven 4 Branch Arch Grafts 20Mm To 34 Mm, Gelatin Coated. 252 Dacron Woven Thoraco Abdominal Grafts 20Mm To 30Mm, Gelatin Coated. 253 Dacron Woven Graft 20 To 34Mm With 8Mm And 10 Mm Perfusion Side Branch, 40-50 Cm Length, Gelatin Coated. 254 Dacron Woven Extra Length Graft With Offset Branch Graft 22 To 32 Mm With 8Mm Perfusion Side Branch, Gelatin Coated. 255 Dacron Woven Pre-Curved Graft 22 Mm To 32 Mm With 8Mm Perfusion Side Branch, Gelatin Coated. 256 Woven Trifurcate 12Mm X 6Mm X 6Mm, 14 Mm X 7Mm X 7Mm, 16Mm X 8Mm X 8Mm, 40-50 Cm In Length, Gelatin Coated. 257 Dacron Knitted Axillo-Bifemoral Bifurcated Graft With Extended Support, Gelatin Coated. 258 Dacron Knitted Axillo-Bifemoral Graft 90 Degrees Angle With 60 Cm Side Branch 8Mm And 0 Mm, Gelatin Coated. 259 Dacron Marking Patch ( Filamentous Fabric ) N• Should Be Nominal Thickness; Around 0.6 Mm N• Water Permeability; Approximately 1800Ml N• Popularly Known As ”Marking Patch” N• Markings Arrow Should Indicate, In Which Direction The Patch Is To Be Stitched. N• Sizes 2” X 2”, 4 X4” And 6X6 ‘ Inches N 260 Double Velour Fabric; N• Should Have Nominal Thickness; 1.4-1.6Mm. N• With Water Permeability Of Approximately 3800 Ml. N• Should Have No Reference Markings. N• Used For Repair Of Intracardiac Defects And For Vsd Repair In Adults. N• Sizes: - 4”X4” & 6”X6” N 261 Outflow Tract Fabric N• Ptfe. N• Should Have Nominal Thickness: Around 0.9Mm. With Water Permeability: 250Ml. N• Used For Aortic Repair, Pulmonary Outflow Tracks Patching & Other Intracardiac Defects. N• Sizes: - 4X4 & 6”X6” N 262 Thin Wall Patch Of Ptfe N• Should Have Multidirectional Node Fiber Structure, To Accommodate Cellular In Growth & Give Uniform Strength Throughout The Patch Surface. N• Should Be Soft & Pliable For Easy Surgical Positioning. N• No Pre Clotting Should Be Required. N• Should Have Excellent Biocompatibility For Cardiac& Vascular Repairs And Peripheral Vascular Reconstruction. N• Should Have Thicknessaround 0.4Mm Suitable For Aortic & Vascular Repair N• Sizes:- 1Cm X 9Cm, 2X9cm & 3Cmx6cm ( Oval Shaped ) N 263 Regular Wall Patch Of Ptfe N• Should Have Multidirectional Node Fiber Structure To Accommodate Cellular In-Growth. N• Should Be Soft & Pliable For Easy Surgical Positioning. N• No Pre Clotting Should Be Required. N• Should Have Excellent Biocompatibility For Cardiac& Vascular Repairs And Peripheral Vascular Reconstruction. N• Thickness – 0.6Mm N• Sizes:- 3Cm X 3Cm, 5Cmx7.5Cm, 2.5Cmx15cm & 10Cmx15cm ( Rectangular ) N 264 Low Porosity Felts Of Ptfe; N• Should Have Thickness 1.5 To 1.8Mm. N• Should Have Low Porosity To Control Bleeding And For Buttress For Sutures. N• Sizes:-2 X 2, 4”X4’ & 6”X6’ N 265 Ptfe Normal Felt; N• Should Have Thickness 1.5 To 1.8Mm. N• To Be Used As A Buttress For Sutures And Friable Tissue N• Sizes:- 2”X2 , 4”X4 & 6”X6 N 266 Ptfe Hard ( Thick ) Felts:- N• Should Have Thickness Around 3 Mm To Provide Added Support To Tissue. N• Sizes:- 4”X4” & 6”X6” N 267 Ptfe Felts Pledgets N• Shape:-Rectangle, Square Oval &Round. Should Have Thickness Around 1.6Mm N• Sizes:- 4.8Mm X 6.0Mm ( Rectangle ) , 9.5Mm X 4.8Mm ( Rectangle ) , 6.0X6.0Mm ( Square ) & 4.8Mm X 6.0Mm ( Oval ) N 268 Regular & Thin Wall E-Ptfe Graft All Sizes And Length 269 Regular & Small Beadings ( Rings ) Ptfe Graft All Sizes And Length. 270 Bt Shunt Ptfegrafts All Sizes And Length 271 Large Diameters E Ptfe Grafts All Sizes And Length 272 E-Ptfe Stretch Large Diameter Reinforced Aortic Vascular Graft Of All Diameters And Length 273 E-Ptfe Cardiovascular Patch N• Sizes:- 5Cm X 15Cm X 0.6Mm X10cm X 15Cm X 0.6Mm, 3Cmx 6Cm X 0.4Mm N 274 E-Ptfe Pericardial Membrane 0.1Mm Thick N• Size 6Cm X 12Cm / 12Cmx12cm / 15Cm X 20Cm N 275 E-Ptfe Stretch Reinforced Thin Wall Heparin Bonded Vascular Graft N10cms Length Size: 3Mm / 3.5Mm / 4Mm / 5Mm / 6Mm Diameter N 276 E Ptfe Stretch Reinforced Thin Wall Non Ringed Heparin Bonded Vascular Graft 40 / 80Cms Length Size: 6 / 7 / 8 / Mm Diameter. 277 E- Ptfe Stretch Reinforced Removable Ringed Thin Wall Heparin Bonded Vascular Graft 50 / 70 / 80Cm Length Size: 6 / 7 / 8Mm Diameter 278 E-Ptfe Stretch Reinforced Thin Wall Limbed Bifurcated Vascular Graft Size : 2 / 6X50cm; 14 / 7 X 40Cm / 50Cm; 16 / 8X50cm; 18 / 9 X50cm; 20 / 10 X 50Cm; 22 / 12 X40cm; 24 / 12X40cm 279 E Ptfe Suture :Size Cvo / Cv2 / Cv3 / Cv4 / Cv5 / Cv6 / Cv7 / Cv8 280 E-Ptfe Stretch Re-In Forced Removable Ringed Thin Wall Pre Configured Axillo Bi Femoral Vascular Graft. Nsize: Ni ) 8Mm Diameter X 70Cm / 40Cm Length Nii ) 8Mm Diameter X 90Cm / 40Cm Length N 281 E Ptfe Stretch Re- In Forced Low Profile Integrated Radially Supported Thin Wall Vascular Graft. Size 6Mm / 7Mm / 8Mm Diameter 40Cm / 60Cm / 80Cm Length 282 E Ptfe Stretch Re-In Forced Removable Ringed Thin Wall Vascular Graft. Size: 6Mm / 8Mm Diameter X 50Cm / 70Cm / 80Cm Length. 283 Ascending Aortic Reconstruction Graft N• One Piece Design Collagen Coated Valsalva Graft For Repair Or Reconstruction Of The Ascending Aorta. N• Should Mimic The Anatomy And Blood Flow Dynamics Of The Natural Sinuses Of Valsalva N• Unique Un-Crimped Section That Does Not Stretch Should Allow Easy Sewing Of Valve Remnants Or Prosthetic Valve N• Should Facilitate Estimation Of The Length Required For Optimal Placement Of Valve Remnants Or Prosthetic Valve To Ensure Optimal Clinical Outcomes. N• Should Have The Ability To Be Precisely Trimmed And Shaped In Case Of Remodeling Technique Procedures. N• At Least 3 References Line Should Act As A Guide For Prosthetic Valve. N• Coated Polyester Fabric Cross Linked Type I Bovine Collagen N• Water Permeability < 5M * Cm -2 Min-1 @ 120Mmhg N 284 Group E: Miscellaneous Items 285 I.V. Set With Flow Controller ( Dehp Free ) : N• Specially Designed I.V. Set For Controlling The Flow Rate Of Fluid Made Of Medical Grade Dehp Free Polymer Nonreactive To Water-Soluble Materials. N• Gravity Drive Infusion Set With Wide Dial, Which Operates As Thumb Wheel Like Roller Clamp. N• Security Door To Prevent The Accidental Change Of Flow Rate. N• Low Cost Disposable Set. N• Sterile, Individually Packed In Blister Pack. N 286 Snugger Set – All Sizes: Three Pairs Of Smooth Snuggers With Yellow, Blue & Pink Colors For Vessel Identification.Each Snare Set Consists Of Thumb Holder Handle For Easy Maneuverability. Specially Designed For Putting Purse String Sutures, Made Of Medical Grade Pvc. Sizes Adult &Pediatric. 287 Disposable Suction Tube & Tip: Medical Grade Pvcmolded Handles With Kink Resistant Tube For Per Operative Suctioning. Tip Of Handle Should Be Crown / Standard Shape. Vent Port To Be Provided In Handle Which Should Be Closed With Tight Sleeve. Soft Flexible Adaptors At Both End Of The Tube For Connection With Secure Fitment Between Suction Source& Handle. Tube Length 2500 Mm, Od: 9 Mm, Id: 6 Mm. Sterile Packed In Poly Pouch Pack. 288 Thoracic Catheter – All Sizes: Extra Soft Thoracic Drainage Catheter, Made Of Dehp Free Medical Grade Polymer, Gentle To Body Tissues & Most Suitable For Thoracic Drainage. Catheters Are Marked At Every 2Cm From The Last Eye. Sterile, Double ( Straight ) Packed In Peel Able Pouch Pack. Sizes Required: Sizes: 16, 20, 24, 28, 32, 36, 40 Fg 289 Thoracic Catheter Right Angled ( 90O ) – All Sizes: Extra Softangledthoracic Drainage Catheter, Made Of Dehp Free Medical Grade Polymer, Gentle To Body Tissues & Most Suitable For Thoracic Drainage. Catheters Are Marked At Every 2Cm From The Last Eye. Sterile, Double Packed In Peelable Pouch Pack. Sizes: 16, 20, 24, 28, 32, 36, 40 Fg 290 Thoracic Catheter With Trocar – All Sizes: Thoracic Drainage Catheter With Trocar For Thoracic Drainage Purpose. Catheters To Be Marked At Every 5, 10, 15 & 20 Cm From The Last Eye. Fitted With Tapered Connector. Sterile, Packed In Peelable Pouch Pack. Sizes: 12, 16, 20, 24, 28, 32, 36 Fg 291 Thoracic Catheter With Trocar – All Sizes: Thoracic Drainage Catheter With Trocar For Thoracic Drainage Purpose. Catheters To Be Marked At Every 5, 10, 15 & 20 Cm From The Last Eye. Fitted With Tapered Connector. Sterile, Packed In Peelable Pouch Pack. Sizes: 12, 16, 20, 24, 28, 32, 36 Fg 292 Chest Drainage Bottle – 2000 Ml: Under Water Seal Drainage System.Double Chamber Compact Unit With 2000 Ml Capacity.Easy To Read Graduation On Bottle To Determine The Drainage Volume Precisely. Clearly Marked Initial Level To Ensure The Underwater Seal. Separate Suction Port For Connection With Suction Unit. Should Have Valve To Prevent Excess Suction. Kink Resistant Large Bore Tubing To Facilitate Unrestricted Flow. Unit To Be Provided With Metal Hangers And Floor Stand. Sterile, Packed In Peelable Pouch Pack. 293 Chest Drainage Bottle – 1200 Ml: Under Water Seal Drainage System. Single Chamber Compact Unit With 1200 Ml Capacity. Easy To Read Graduation On Bottle To Determine The Drainage Volume Precisely.Should Have Valve To Prevent Excess Suction. Clearly Marked Initial Level To Ensure The Underwater Seal. Specially Designed Positive Pressure Relief Valve. Separate Suction Port For Connection With Suction Unit. Kink Resistant Large Bore Tubing To Facilitate Unrestricted Flow. Unit To Be Provided With Metal Hanger / Floor Stand. Sterile, Packed In Peelable Pouch Pack. 294 Chest Drainage Bottle – 500 Ml: Under Water Seal Drainage System. Single Chamber Compact Unit With 500 Ml Capacity. Easy To Read Graduation On Bottle To Determine The Drainage Volume Precisely. Clearly Marked Initial Level To Ensure The Underwater Seal. Separate Suction Port For Connection With Suction Unit. Kink Resistant Large Bore Tubing To Facilitate Unrestricted Flow. Should Have Valve To Prevent Excess Suction. Unit To Be Provided With Metal Hanger / Floor Stand. Sterile, Packed In Peelable Pouch Pack 295 Skin Marker Pen: Skin Marker For Surgery Preparation. N• Manufactured From Bactericidal, Antifungal Gentian Violet. N• Violet Color Ensures Easy Visibility. Sterile, Individually Packed In A Peel Open Pack. N• Surgical Skin Marker Pen With Standard Size Tip. N 296 Fogarty Arterial Emblectomy Catheter N• Vinyl Latex Balloon Tipped Catheter For Arterial Emblectomy Procedure. N• Usable Length 60-80 Cm, Size 2F To 8F. N• Recessed Winding Technique For Balloon Attachment For Maintaining Balloon Symmetry For Uniform Contact With Vessel Wall, Providing Consistent Clot Removal N 297 Thru Lumen Fogarty Catheter N• Vinyl Latex Balloon Tipped Catheter For Arterial Embolectomy Procedure. N• Usable Length 80 Cm. N• Size 2F-8F. N• Second Lumen For Guide Wire Compatibility Facilitating Crossing Occluded, Tortuous &Stenotic Arterial Wall Or To Be Used For Drug Delivery & Blood Sampling. N• Stainless Steel Bushes Under Proximal & Distal Balloon Windings For Visualization Under Fluoroscopy. N• Recessed Winding Technique For Balloon Attachment For Maintaining Balloon Symmetry For Uniform Contact With Vessel Wall, Providing Consistent Clot Removal. N 298 Electro Cautery Return Plate With Cord N• All Sizes Should Be Available N• Disposable Sticky Patient Return Split Monitoring Style. N• Pre Attached Cable ( Us Fda Approved ) N 299 Electro Cautery Return Plate Without Cord N• All Sizes Should Be Available N• Disp. Sticky Patient Return Split Monitoring Style. N• Cord Should Be Provided Separately. N• Us Fda Approved N 300 Disposable Surgical Drape: N• Made Up Of Reinforced Spun-Bond Film Composite Material, Blue Laminate Of Polypropylene Non-Woven Fibers And Polyethylene Film. N• Highly Absorbent Yet Impervious Across Entire Drape. N• Low-Linting, Non-Breathable, Abrasion Resistant, Durable, Strong Tear Resistant, Conformable, With Self Adhesive Containing Hypoallergenic Acrylate Type Adhesive With A Silicone Coated Paper Liner. N• Eto Sterilized. N• Cabg Pack:4 Self Adhesive Cautery Bags ( 30Cmx35cm ) , 3 Op Tapes ( 10Cmx55cm ) , 4 Lint Free Hand Towels ( 23.5Cmx38cm ) , 4 Self Adhesive Towel Drapes ( 91.5Cmx100cm ) , 1 Self Adhesive Medium Drape ( 183Cmx183cm ) , 1 Self Adhesive Large Drape ( 150Cmx250cm ) , 1 Instrument Table Drape ( 150Cmx200cm ) , 1 Large Instrument Table Drape ( 183Cmx240cm ) , 1 Self Adhesive Bilateral Split Drape ( 183Cmx200cm ) , 2 Triangular Drape ( 91.5Cm X 91.5Cm X 129Cm ) . N 301 Cautrey Lead N• Disposable. N• Hand Control Button Switch With Ptfe Coated Blade Electrode. N• Should Be Light Weight N• Us Fda Approved N• Should Be Compatible With All Standard Brands Of Cautery Machines. N 302 Titanium Ligating Clips “Size – Small” N• Wire Of The Clip Should Be ‘ Heart Shaped For A Firm Grip On Vessels N• Clips Should Be Of ‘Chevron’ Shape For Better Closure N• Cartridge Should Have Adhesive Backing For Better Control While Loading. N• Clips Should Be Easy To Lad With Soft Loading Technique. N• Clip Cartridges Should Be Color Coded For Better Identification. N• Clips Quoted Should Be Registered In India For Selling. N• Should Have All Required Documentations Like From 10 A And Form 41 Etc. N• Should Be Us Fda Approved With Clinic Data Backing For The Same. N 303 Titanium Ligating Clip “ Size Medium” N• Wire Of The Clip Should Be ‘Heart Shaped’ For A Firm Grip On Vessels N• Clips Should Be Of ‘Chevron’ Shape For Better Closure. N• Cartridge Should Have Adhesive Backing For Better Control While Loading. N• Clips Should Be Easy To Load With Soft Loading Technique. N• Clip Cartridges Should Be Color Coded For Better Identification. N• Clips Quoted Should Be Registered In India For Selling. Should Have All Required Documentations Like From 10A And Form 41 Etc. N• Should Be Us Fda Approved With Clinic Data Backing For The Same. N 304 Titanium Ligating Clips”Size-Medium Large” N• Wire Of The Clip Should Be ‘Heart Shaped’ For A Firm Grip On Vessels. N• Clips Should Be Of “Chevron’ Shape For Better Closure. N• Cartridge Should Have Adhesive Backing For Better Control While Loading. N• Clips Should Be Easy To Load With Soft Loading Technique. N• Clip Cartridges Should Be Color-Coded For Better Identification. N• Clips Quoted Should Be Registered In India For Selling. Should Have All Required Documentation Like Form 10A And Form 41 Etc. N• Should Be Us Fda Approved With Clinic Data Backing For The Same. N 305 Titanium Ligating Clips” Size-Large N• Wire Of The Clip Should Be ‘Heart Shaped For A Firm Grip On Vessels. N• Clips Should Be Of ‘Chevron’ Shape For Better Closure N• Cartridge Should Have Adhesive Backing For Better Control While Loading. N• Clips Should Be Easy To Load With Soft Loading Technique. N• Clip Cartridges Should Be Color-Coded For Better Identification. N• Clip Quoted Should Be Registered In India For Selling. Should Have All Required Documentation Like From 10A And Form 41 Etc. N• Should Be Us Fda Approved With Clinic Data Backing For The Same. N 306 Applicator For Titanium Clips ( Small, Medium, Large ) N• ?Should Be Available In Three Shapes :Curved, Angled & Right Angled N• Device To Be Compatible For Titanium Clips Listed In The Tender. N 307 Aortic Punch Long Handle: N• Size: 2.5Cm To 6Cm N• Should Have Sharp Dual Cutting Edge For Clean, Precise Removal Of Aortic Tissue. N• A Conical Tip Should Be There For Easy Insertion By Straight Or Button Hole Technique. N• Ten Blade Sizes For Trimming To Desired Size And Shape 2.5Mm – 6.0Mm. N 308 Pediatric Bronchial Blocker – N• Should Have A Catheter With A Bifurcated Distal End Resembling The Bifurcation Of The Trachea. During Insertion Through A Standard Endotracheal Tube, Both Distal Ends Easily Find Their Way Into The Two Main Stem Bronchi. Under Bronchoscopic Vision The Lung Can Be Isolated By Inflating The Balloon. The Inflated Balloon Will Always Be Located At The Entrance Of The Main Bronchus. The Ez-Blocker Should Not Dislocate After Inflation Of The Isolated Lung. If Renewed Isolation Is Required The Balloon Can Be Re-Inflated Without The Need To Reposition The Balloon. Size -7Mm. N 309 Disposable Camera Sleeve; N• Transparent, Plastic Disposable, Sterile Camera Sleeves, For Use During Mics, Robotis, For Epicardial Echo. N• Circular Diameter-6Inches . N• Lengthmore Than 1Meter. N 310 Specifications For Tyvek Roll N• Tyvek Sheet In Rolls, Backed With A Strong Plastic Top Layer Suitable For Both Ethylene Oxide And Plasma Sterilization. N• Should Be Compatible With All Standard Brands Of Plasma And Steam Sterilization Systems N• Should Have Sterilisation Process Indicator To Confirm Effective Sterilization N• Sizes Required N? 50Cm X 70Mtrs N? 7.5Cm X 70Mtrs N? 10Cm X 70Mtrs N? 15Cm X 70 Mtrs N? 17.5Cm X 70 Mtrs N? 20Cm X 70 Mtrs N? 25Cm X 70 Mtrs N? 30Cm X 70 Mtrs N? 35Cm X 70 Mtrs N? 40Cm X 70Mtrs N? 45Cm X 70Mtrs N? 50Cm X 70Mtrs N? 60Cm X 70Mtrs N 311 Surgical Brush With Iodine Povidone And Chlorohexidine N• Should Be Sponge Impregnated 12% Povidone-Iodine In A 15Ml Solution Of Teepol, P.E.G And Water Supplied With Nail Cleaner. N• Should Be Sponge Impregnated 20% Chlorohexidine-Iodine In A 15Ml Solution Of Iso Propyle Alcohol And Water Supplied With Nail Cleaner. N• Should Be Us Fda Approved N 312 Vacuum Drainage Sets: N• Device For Close Wound Drainage Under Negative Pressure Post Operatively With Option To Use One Or Two Catheters. N• Drain Catheters Should Be Provided With Radio Opaque Line And Smooth Eyes. N• Connecting Tube Should Be Kink Resistant And Should Be Provided With Additional Strength To Withstand The Suction. N• Chamber Should Be Easy To Depress So As To Activate The Suction Of Bellow Unit. N• Should Be Available With Different Catheter. N• Should Be Sterile And Individually Packed. N• Sizes Of 10, 12, 14, 16, 18 Fg. N 313 Adhesive Transparent Drape ( Surgical Site Film ) All Sizes N• Should Be Equivalent To Dermincise. N• Should Be Self-Adhesive Sterile Drape For Surgery And Wound Dressing Incise Drape. N• Should Be Available In Assorted Sizes. N 314 Bedsores Prevention Air Mattress With Pump: Air Mattress For Prevention And Treatment Of Bedsores Stage. N• Should Be Low Air Loss And Alternating Pressure Mattress. N• Should Have Unique Strip Type Design, Which Can Change Shape With The Elevation Of Bed Of The Patient. N• Should Prevent Bed Sores / Accelerate Healing Of Existing Bedsores. N• Should Keep The Interface Pressure Against Patient’S Skin At A Level Below Capillary Occlusion. N• The Pump Should Operate At Very Low Sound Level. N• Pump Should Have Provision To Hang To The End Of The Bed By Means Of 2 Hooks. N• Mattress Should Resist A Temperature Of -30 Degree Celsius And Should Support Weight Of 110Kg. N• Dimensions Should Be Approx.180 X 80 X 7.5 Cms. N• Should Be Individually Packed. N• Kit Should Consist Of Mattress, Motor & Spare Cell. N 315 Respiratory Muscle Exerciser ( Inspiratory Muscle Trainer Device ) N• Should Incorporate A Flow-Independent, One-Way Valve To Ensure Consistent Resistance, N• Should Feature An Adjustable Specific Pressure Setting To Be Set At A Particular Time. N• It Should Work Via Inhalation To Exercise The Respiratory Muscles. N• It Should Have Flow Independent One-Way Valve, Which Should Work At Constant Pressure Regardless Of Patients Airflow. N• It Should Be Easy To Set At Adjustable Pressure, Whichcan Be Used / Held In Any Position. N• It Should Be Easy To Clean & Should Have The Capacity To Be Used With Mouthpiece. N• It Should Be Individually Packed In Poly Bag. N 316 Absorbable Haemostatic Gelatin Sponge– N• Should Be Sterile Absorbable Hemostatic Gelatin Sponge With Uniform Porosity. N• Should Be Non Irritating And Non Toxic. N• Should Be Gamma / Heat Sterilized. N• Should Be Packed In A Double Blister Pack. N• Dimensions: Approximately 8 X 5X 1 Cm. N 317 Reusable Gel Pack: Reusable Gel Packs For Pain Management. N• It Should Be Able To Be Kept In Freezer For Cold Therapy. N• It Should Be Able To Be Microwaved ( For Appx. 2Mintues ) / Kept In Boiling Water To Provide Hot Fomentation. N• Gel Packs Must Be Of A Superior Quality And Non-Toxic Filling Should Be Safe And Hold Temperatures For Longer Duration. N• Should Be Durable, Burst & Puncture Resistant. N• Should Have Been Designed To Ensure Even Spread Of Gel Inside The Pack. N• Two Sizes: Large: 15 X 30Cm ( 6” X 12” ) & Medium: 10 X 25 Cm ( 4” X 10” ) . N 318 Carotid Shunts : N• Should Have A Wide Selection For Carotid Endartrectomy Procedures. Shunts Should Be Available In Various Sizes And Lengths, Including Straight, Tapered And “T” Design To Add Versatility In Use. N 319 Disp. Bull Dog Clamps All Sizes N• Disposable’ Bull Dog’ Clamps For Temporary Occlusion Of Vascular Structures. N• Atraumatic N• Made With Standard Quality Plastic. N• Should Be Eto Sterlisable For Repeated Use. N 320 Gauze Pads N N• Gamma Sterilized 100% Cotton + Gauze Combine Dressing Nsize-10Cm X 10Cm, 10Cm X 20Cm N N I. Gauze Overwrap ( Of The Combined Dressings ) - Leno Weave Abs. Gauze Cloth N Nthread Count: 21’S X 21’S, Construction Of Cloth Per 2.5Cm: 20 X 20 N Naverage Cut Size Of Leno Gauze Cloth Used For Overwrap N10cm X 28Cm: Wt: 44.5G / Sq.M, 20Cm X 28Cm Wt: 44.5G / Sq.M N Nabsobency: Below 10 Seconds, Fliorescence: Nil N Nii. Abs. Cotton Wool I.P Used: N Nav. Layer Thickness Of Pad: 8-10Mm, Av. Cut Sizes I. 10Cm X 10Cm, Ii. 10Cm X 20Cm Nabsorbency: Below 10 Seconds, Fliorescence: Nil N N Iii. Final Product: Ngauze Cotton Pad B.P. 10Cm X 10Cm & 10Cm X 20Cm N Iv. Gamma Rays Sterilization: Product Irradiated With Gamma Rays. N 321 Gauze Swab N N• Gamma Sterilized 100% Cotton Gauze Swabs Nsize-10Cm X 10Cm X 12Ply, 10Cm X 08Cm X 12Ply, 08Cm X 06Cm X 12Ply N Ni. Cotton Gauze Cloth: Clean, Hygine, Neutral In Ultraviolet Rays, Ph Value 7, With X-Ray Detectable Threads. N Ii. Construction Of Cloth: Nthread Count: 30’S X 30’S N Wrap 46 Per Dm ( +-4 ) N Weft 40 Per Dm ( +-4 ) N ( As Per Fii Schedule ) N Absorbency: Below 10 Seconds N Fluorescence: Nil Nforeign Matter: 0.3% By Weight Nweight: 26.5G / Sg.M N Iii. Cotton Gauze Cloth Of Size: 40Cm X 30Cm, 32Cm X 30Cm, 32Cm X 18Cm N Nfolded With Cut Edges In Size Into The Final Product Sizes. Size-10Cm X 10Cm X 12Ply, 10Cm X 08Cm X 12Ply, 08Cm X 06Cm X 12Ply Niv. Gamma Sterilization: Neach Gauze Swab Should Be In Fully Packed Condition To Be Sent For Sterilization By Gamma Rays From Where Batch Wise Sterilization Certificate Are Provided. N Nv. Packing ( For All Size ) N1. One Pouch With 1 Swab, 20 Pouches In A Box N2. One Pouch With 3 Swab, 10 Such Pouches In A Box. N3. One Pouch With 5 Swabs, 6 Such Pouches In A Box. N 322 Cardiac Sutures As Per Below Specifications 323 5-Chloro-2 – ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of 90 Cm , 1 / 2 Circle Round Body, 30 Mm, Size-2-0, Pack Of 12 Foils 324 5-Chloro-2 – ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of 90 Cm , 1 / 2 Circle Round Body, 40 Mm, Size-1-0, Pack Of 12 Foils 325 5-Chloro-2 – ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of90 Cm , 1 / 2 Circle Round Body ( Heavy ) , 40 Mm, Size-1, Pack Of 12 Foils 326 5-Chloro-2 – ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of 90 Cm , 1 / 2 Circle Reverse Cutting, 40 Mm, Size-2-0, Pack Of 12 Foils 327 Polyamide Black Monofilament 70 Cm , 3 / 8 Circle Reverse Cutting, 45 Mm, Size-2-0, Pack Of 12 Foils 328 Black Braided Silk Of 90 Cm , 3 / 8 Circle Cutting Needle, 16 Mm, Size-3-0, Pack Of 12 Foils 329 Black Braided Silk Of 76 Cm , 3 / 8 Circle Reverse Cutting Needle , 45 Mm, Size-2-0, Pack Of 12 Foils 330 Black Braided Silk Of 90 Cm , 1 / 2 Circle Round Body Needle 25 Mm, Size-3-0, Pack Of 12 Foils 331 Black Braided Silk 90 Cm , 1 / 2 Circle Round Body, 30 Mm, Size-2-0, Pack Of 12 Foils 332 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body, 25 Mm, Size-3-0, Pack Of 12 Foils 333 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 25 Mm, Size-3-0, Pack Of 12 Foils 334 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Tapercut Double Needle, 17 Mm, Size-4-0, Pack Of 12 Foils 335 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 16 Mm, Size-5-0, Pack Of 12 Foils 336 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body ( 282 Microns ) Double Needle, 10 Mm, Size-6-0, Pack Of 12 Foils 337 Polypropylene 60 Cm , Taper Point Curved Round Body Double Needle, 8 Mm, Size-7-0, Pack Of 12 Foils 338 Reel 25 Mtr 6 Spools In A Box , Black Braided Silk, Size-3-0, Pack Of 6 Foils 339 Reel 25 Mtr 6 Spools In A Box , Black Braided Silk, Size-2-0, Pack Of 6 Foils 340 Reel 25 Mtr 6 Spools In A Box , Black Braided Silk, Size-1-0, Pack Of 6 Foils 341 Polyethylene Tere Pthalate Braided Green 5X75 Cm White 5X75 Cm With Firm Ptfe Pledgets 6Mmx3mmx1.5Mm , 1 / 2 Circle Tapercut Sx Double Needle, 17 Mm, Size-2-0, Pack Of 6 Foils 342 Polybutylate Braided Green 5X75 Cm White 5X75 Cm With Firm Ptfe Pledgets 6Mmx3mmx1.5Mm , 1 / 2 Circle Tapercut Sx Double Needle, 26 Mm, Size-2-0, Pack Of 6 Foils 343 Bonewax 2.0 Gm 344 Polypropylene Blue Monofilament 102 Cm , 3 / 8 Circle Circle Round Body Visiblack ( 220 Microns ) Double Needle, 13.1 Mm, Size-6-0, Pack Of 12 Foils 345 Polypropylene Blue Monofilament 90 Cm , 3 / 8 Circle Round Body ( 320 Microns ) Double Needle, 13.1 Mm, Size-5-0, Pack Of 12 Foils 346 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 26 Mm, Size-3-0, Pack Of 12 Foils 347 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 17.4 Mm, Size-5-0, Pack Of 12 Foils 348 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 17 Mm, Size-4-0, Pack Of 12 Foils 349 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body ( 220 Microns ) Double Needle, 9.3 Mm, Size-7-0, Pack Of 12 Foils 350 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body ( 220 Microns ) Double Needle, 9.3 Mm, Size-8-0, Pack Of 12 Foils 351 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body ( 220 Microns ) Double Needle, 9.3 Mm, Size-7-0, Pack Of 12 Foils 352 Polypropylene Blue Monofilament 75 Cm , 3 / 8 Circle Round Body ( 380 Microns ) Double Needle, 13 Mm, Size-6-0, Pack Of 12 Foils 353 Polypropylene Blue Monofilament 90 Cm , 1 / 2 Circle Round Body Double Needle, 25.9 Mm, Size-4-0, Pack Of 36 Foils 354 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body Double Needle, 13 Mm, Size-6-0, Pack Of 36 Foils 355 Polypropylene Blue Monofilament 60 Cm , 3 / 8 Circle Round Body, Taper Point Bv175-6 Double Needle, 8 Mm, Size-8-0, Pack Of 36 Foils 356 5-Chloro-2- ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of 70Cm Undyed , 3 / 8 Circle Ps-1 Prime, 24 Mm, Size-3-0, Pack Of 36 Foils 357 5-Chloro-2- ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of90cm Undyed , 1 / 2 Circle Round Body Taper Point Ct-1, 36.4 Mm, Size-2-0, Pack Of 36 Foils 358 5-Chloro-2- ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of90cm Undyed , 1 / 2 Circle Round Body Taper Point Ct-1, 36.4 Mm, Size-1-0, Pack Of 36 Foils 359 5-Chloro-2- ( 2, 4 – Dichlorophenoxy ) Phenol Coated Polyglactin 910 Suture Of90cm Undyed , 1 / 2 Circle Round Body Taper Point Ct-1, 36.4 Mm, Size-1, Pack Of 36 Foils 360 Steel Monofilament 2X75 Cm , 1 / 2 Circle Round Body Blunt Point, 44 Mm, Size-6, Pack Of 6 Foils 361 Steel Monofilament 2X75 Cm , 1 / 2 Circle Round Body Blunt Point, 44 Mm, Size-5, Pack Of 6 Foils 362 Steel Monofilament 4X45 Cm , 1 / 2 Circle Conventional Cutting, 48 Mm, Size-6, Pack Of 12 Foils 363 Steel Monofilament 4X45 Cm , 1 / 2 Circle Conventional Cutting, 48 Mm, Size-5, Pack Of 12 Foils 364 Sutupak 2X75 Cm , Size-4-0, Pack Of 12 Foils 365 Sutupak 2X75 Cm , Size-3-0, Pack Of 12 Foils 366 Sutupak 2X75 Cm , Size-2-0, Pack Of 12 Foils 367 Sutupak 2X75 Cm , Size-1-0, Pack Of 12 Foils 368 Sutupak 2X75 Cm , Size-1, Pack Of 12 Foils 369 Sutupak 2X75 Cm , Size-2, Pack Of 12 Foils 370 Vascular Sling Tape Of All Sizes With And Without Needle 371 Mitral Valve Sutures ( 2-0 Polyester ) Pledgeted On 26 Mm ½ Circle Cutting Taper End Double Armed Needle 372 Aortic Valve Sutures ( 2-0 Polyester ) Pledgeted On 17.5 Mm ½ Circle Taper Cut Double Arm Needle 373 White Cotton Umbilical Tape 1 / 8”X 18” ( 0.32 Cmx45 Cm ) 374 ( I ) Vented Endotracheal Bougies Nabout 15 F In Calimeter And Two Cm In Length ( Which Might Vary Slightly Depending Upon Manufacturer ) . N 375 ( Ii ) Proseal Laryngeal Mask Airway ( Lma ) N Lma Proseal Size 1.5, 2, 2.5, 3, 4, 5, Size Cuff Deflator, Size Introducer ( 1-2, ½, 3-5 ) N 376 ( Iii ) Laryngeal Mask Airway O Lma Classic Nlma Classic Size 1, 1 / 12, 2, 2.5, 3, 4, 5, 6, Cuff Deflator Size 3-4, 5 N 377 ( Iv ) Intubating Mask Laryngeal Airway Nlma Fastrack Size 3, 4, 5, Stabiliser Rod, Ett 6.0Mm, 6.5, 7.0, 7.5, 8.0Mm. N 378 Artifical Heart Valve Aortic Mechanical Tilting Disc. N• Indigenous, Rigid Tilting Disc, Rotatable Heart Valve, Mechanical, All Sizes ( No. 17, 19, 21, 23, 25, 27 ) N 379 Artificial Heart Valve Mitral Mechanical Tilting Disc N• Indigenous, Rigit Tilting Disc, Rotatable Heart Valve, Mechanical, All Sizes ( No. 23, 25, 27, 29, 31 ) N

Key Value

Document Fees
INR 5000 /-
EMD
INR 150000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: < Procurement of CTVS implants and Surgical Consumable items at RIMS, Ranchi >
Sl. No. Item Description Item Code / Make Quantity Units
1 1 CONSUMMABLES FOR CTVS
2 1.01 Intravenous cannula\n• Size: 14 G to 22G.\n• ISO/ CE certified\n• Non-toxic, biologically acceptable FEP/ polyurethane catheter with metallic stellate.\n• Catheter should be made up of encapsulated radio-opaque material.\n• The stellate should have taper-cut and sharp for easy insertion. Beyond this cut end it should not protrude more than 1mm further than the tip of catheter.\n• Injection port with one-way (silicone valve) with flange attached to the catheter shaft. After insertion into blood vessel it should be easy to open to open and to close the valve without application of much pressure so as to avoid injuries to the blood vessel.\n• Standard size hub attached to the distal end for intravenous line attachment.\n• Injection port with color-coded cap.\n• Color-coding for different sizes.\nPre-sterilized packed singly with tyvec paper and blister (cannula manufacturing date, size, length of cannula etc. should be clearly printed)\n• Size- 14, 16, 18, 20, 22 & 24G.\n item1 1 Nos
3 1.02 Radial arterial cannula\nCatheter lumen size 20G\nCatheter length 8cm ,\n1 Safety needle size 20G ,1 straight guide wire, 1 PU extension tube length 10 cm with an autoflush.\n item2 1 Nos
4 1.03 Pressure monitoring line 200/150 cm M/F\nLength 200/150 cm , connecter size-Male/Female\nMade of clear , non-toxic medical grade PVC , Sterile.\n item3 1 Nos
5 1.04 Pressure monitoring line 200 cm M/M\nLength 200 cm , connecter size – Male/Male\nMade of clear , non-toxic medical grade PVC,\nSterile .\n item4 1 Nos
6 1.05 FEMORAL ARTERIAL CANNULA (ADULT):\n• Femoral Arterial Cannula (Adult) Seldinger technique polyethylene shall have radio opaque line and anti-kink collar and wing hub for fixation to skin.\n• Size-1. 20G-Length 8cm. One transparent and XRO Catheter (polyethylene), one introducer needle one straight guide wire.\n• Size-2.18 G Length 10cm. One transparent and XRO Catheter (polyethylene), one introducer needle one straight guide wire.\n• Size 3. 16 G Length 15& 20cm. One polyurethane XRO Catheter one introducer needle, J guide wire-advancer \n• Preferably US FDA APPROVED\n item5 1 Nos
7 1.06 FEMORAL ARTERIAL CANNULA(PAED):\n• Femoral Arterial Cannula (Paed) Polyurethane with radio opaque line introduced by Seldinger technique with integral polyurethane extension tube length 4.5cm with fixation wing.\n• Should be in a peel pack.\n• Should have one polyurethane catheter, one introducer needle, and one straight guide wire with flexible tip, one 50x50 cm drape sheet.\n• Size 22G Length 4,6,8,20cm.\nPreferably US FDA/ CE APPROVED\n item6 1 Nos
8 1.07 Central Venous Catheters – Double & Triple Lumen: \n• Should bemanufactured from specially formulated and biocompatible PU material. \n• Should be soft tip catheter for easy and non-traumatic insertion, based on Seldinger technique.\n• Should be sterile and individually packed in hard blister pack.\n• Kit should consist of:\na) Soft tip polyurethane catheter,“J” tip Guide wire (0.035” – 30-80 cm) with guide advancer.\nb) “Y” shaped Introducer needle (18 G X 70 mm).\nc) Tissue dilator.\nd) Suture wing and clamp fastener, scalpel, injection ports, Extension Line clamps, Syringe 5ml\ne) Injection site, Hypodermic needle (17G to 21G)\nf) Needle sponge\n• Sizes: Double Lumen: 7 Fr, 16 cm, 14/18 G, 18/18G.\n• Triple Lumen: 7 Fr, 12 to 20 cm, 16/18/ 18 G, 14/18/18G, 20/22/22G.\n item7 1 Nos
9 1.08 PAEDIATRIC DOUBLE LUMEN CVP KIT\n• Should have polyurathane double lumen kit with flexible distal tip fully radio opaque should have flexible distal tip fully radio opaque graduation each centimeter from 5cm to the distal tip. J Guide wire. Should have distal & proximal lumen 18 G each for rapid infusion.\n• Size. 3-4Fr Length 10-15cm ( StraightGuide-wire)\n• 4.5Fr Length 6 & 12.5cm. J GuidewireNitinol.\n• 6 Fr. – Length 15- 20cm\n• Preferably US FDA APPROVED\n item8 1 Nos
10 1.09 SINGLE LUMEN CATHETER (SELDINGER TECHNIQUE)\n• Should be polyurethane Single Lumen catheter with J Guide-wire non kinking kit should be radio opaque with fixation wing & integral extension tube with flexible & transparent extension tube (PUR)\n• Size – Catheter 12-16G, \n• Lengths- 10cm-20cm\n item9 1 Nos
11 1.1 LA LINE CENTRAL CATHETER(ALL SIZES)\n• Should be long I.V Catheter with external needle and fixed proximal hub catheter in fully radiopaque polyurethane protected by a non touch-handling sleeve marking every cm 10 to 20cm.\n• Should be made available in assorted sizes.\n item10 1 Nos
12 1.11 Swan Ganz PA catheter Introducer Kit set:\n• Percutaneous Sheath introducer set should have bonded hemostasis valve & side port along with .035 x 45 cm straight & “J” tip guide wire for introducing 7.5 Fr& 8.0 Fr PA Catheter.\n• It should have sheath diameter of 8.5 F & sheath length of ˜11 cm. It should be made of radiopaque polyurethane & should have a coating of Heparin as well as antimicrobial material (Benzalkonium Chloride) on entire sheath surface.\n• It should come with 1 catheter contamination shield, ˜80 cm in length.\n• It should have one 4-waystopcock, one vessel dilator & four 4x 4gauze pads.0ne disposable scalpel, # 11 blade & one 18 ga x 2 ½ thin wall needle.\n item11 1 Nos
13 1.12 Swan Ganz Thermodilution VIP Catheter\n• Flow directed 5-lumen balloon tipped pulmonary artery catheter. 7.5 Fr in diameter &˜ 110 cm in length \n• It should have a coating of Heparin as well as antimicrobial material (Benzalkonium Chloride) on entire catheter surface. \n• Should be able to give Cardiac output using Thermo dilution method.\n• Should be able to give PA pressure, PAWP & RA Pressure when connected to transducer.\n• Should have proximal infusion &proximal injectateports at ˜31 cm &˜30 cm respectively.\n• It should come with one volume-limiting syringe of 1.5cc for balloon inflation.\n item12 1 Nos
14 1.13 Swan GANZ PA Catheter \n• Flow directed 3 lumen balloon tipped pulmonary artery catheter, 7 Fr in diameter &˜110 cm in length \n• Should be able to give PA pressure, PAWP & RA Pressure when connected to transducer. Should have proximal infusion port at 30 cm. Recommended guide wire size 0.89 mm.\n• It should come with one volume-limiting syringe of 1.5cc for balloon inflation.\n item13 1 Nos
15 1.14 Disposable Pressure Transducer\n• One Disposable pressure transducer with flush device & vent stopcock.\n• It should be able to give a Pressure & waveform on any multipara monitor with IBP module.\n• It should have 3±1ml/hr flow rate across flush device with IV bag pressurized to 300 mm Hg\n• It should have moisture resistance connector Sheath without pins.\n• Must have a natural frequency 25-40 Hz to give accurate reading at wide variations of heart rate range.\n• It should have an operating Pressure Range of -50 to 300 mmHg, with Overpressure Tolerance Range of -500 to +5000 mm Hg.\n• It should work on ambient temperature (operating) 15ºC to 40ºC, and must be suitable for storage at -25ºC to +70ºC. \n• It should have sensitivity of 5.0µ V/V/mm Hg ± 1%\n• It should have an integrated flush device, which can be operated from any direction for easy accessibility.\n• It should have a test port that can be used to check the performance of the transducer when used along with a simulator device for the purpose.\n item14 1 Nos
16 1.15 PRESSURE INFUSION BAG\n• Should be made up of durable plastic to prevent the rip & tear of bag\n• Should have clear sleeve around the bag to see the contents of the fluid bag.\n• Should have convenient IV pole loop hanger\n• Should have I.V Bag holder to hang the fluid bag inside.\n• Should have double sealing to prevent the rip or tear of pressure bag \n• Should have stopcock valve.\n• Should have efficient palm fitted bulb for the inflation of bag.\n• Pressure gauge should have 360-degree window to see pressure from all sides.\n• Should have built in bleed valve to check the over inflation of the bag.\n• Sizes- 500,1000 & 3000ml.\n• Each bag should have aneroid pressure gauge with inflation capacity of 400 to 700 mmHg.\n item15 1 Nos
17 1.16 Anatomical face mask size \n• Should be good quality and latex free, reusable autoclavable and should conform to its face 22mm female connection, \n• Inflatable air seal size 0,1,2,3,4,5,6.\n item16 1 Nos
18 1.17 SILICON FACE MASK CE MARKED\na) Should be transparent for easy observation.\nb) Should be flexible & can be repeatedly autoclavable.\nc) Should be of reputed brand\nd) Each unit should have print of company name & size.\ne) Sizes 0,1,2,3,5.\nf) Should have self-inflating soft cuff (in which pressure can be regulated).\ng) Should have comfortable grip for tight seal.\n item17 1 Nos
19 1.18 Oxygen Masks:O2 Mask Adult &Paed:\n• Molded facemask manufactured from non-toxic, non-irritant medical grade PVC. \n• Should be provided with adjustable elastic strap. \n• Should have swivel connector for convenience of attachment to the oxygen tube.\n• Should have 200 cm long multichannel tube to ensure continuous flow of oxygen. \n• Should have proximal end fitted with soft funnel shape connector for connection to oxygen source. \n• Should be individually packed in poly bag.\n item18 1 Nos
20 1.19 Nebulizer Mask Adult & Paed.:\n• Soft, clear aerosol mask with anatomical form for long term use. \n• Should have gently rolled, feathered edges with integrated Nose Bridge for extra comfort.\n• Should have rotating type connector for patient’s comfort. \n• Should have larger surface area with unique convex cone design to ensure maximum capillary action and to eliminate medication wastage.\n• Should be able to nebulize 3 cc within 10 minutes in horizontal or vertical position so as to ensure patient comfort. \n item19 1 Nos
21 1.2 Closed circuit (Pediatric):\n• ISO marked.\n• Length-1.75mtr. double tubing with a Y connector with least dead space.\n• Y connector adopter 15mm to 20 mm connector.\n• Latex free medical plastic material, disposable, non-irritant to tissue, and should not react to anesthetic gases and volatile agents.\n• Outer diameter (OD) 10-12mm.\n• Bag-1L. capacity, natural latex medical grade rubber, antistatic, soft and should not react with anesthetic gases and agents.\n• Expandable type, corrugated, non-kinkable tube.\n item20 1 Nos
22 1.21 Mapleson C breathing system adult:\n• For use during anesthetic procedures, critical care areas and transportation of adult patients; 1.8m length 2 L bag with 15 F/22F connector APL valve.\n item21 1 Nos
23 1.22 Mapleson C breathing system pediatric:\n• For use during anesthetic procedure, critical care areas and transportation of pediatric patients; 1.8m length 2L bag with 15F/22F connector.\n item22 1 Nos
24 1.23 Oxygen recovery kit:\n• It should be specially designed kit with ‘T’ shaped connector for delivering oxygen. \n• It should have 15 mm connector to fit all tracheal tubes. \n• It should have suction port at elbow to facilitate oro-bronchialsuctioning without disconnecting the patient from oxygensource. \n• It should have two-meter long star lumen tube to enable to connect theT-connector with oxygen source. \n• Distal end should be open for exhaling the waste gases. \n• Should be sterile and individually packed in peelable pack. \n• Unit should comprise of: ‘T’ shape connector & two meter long tube.\n item23 1 Nos
25 1.24 T piece with APL valve\n• Should be good quality, light weight, non conductive disposable T piece with corrugate tubing 1.8m circuit length, low resistance, 500 ml bag with APL valve with 15F/22F connector, safety cap.\n item24 1 Nos
26 1.25 Anesthetic circuit holder of adult, pediatric and neonatal circuits \n• Anesthetic circuit holder for adult and pediatric circuits, should be reusable with one joint and flexible rod with under mattress fixation; adjustable height\n item25 1 Nos
27 1.26 Endotracheal tubes with cuff (disposable):\n• Pre-sterilized, single use\n• Siliconized PVC non-toxic to tissues.\n• Implantation tested marking on the tube.\n• Thermo-sensitive to adapt to tracheal anatomy.\n• Non-kinkable.\n• Bevel with Murphy eye.\n• Radio-opaque line all along the length of the tube to detect the correct position on X-ray.\n• Should adopt universal connector of 15mm and should be compatible with all circuits.\n• Cuff should be bonded, non-herniating.\n• Size range- 2.5 to 9.0 mm in 0.5mm increments.\n• Inflation of the cuff balloon via a one-way valve with a pilot balloon and should be on the concave aspect of the tube.\n• Depth marker at the proximal cuff end, 3 cm from the cuff.\n• Cuff should be smooth, non-traumatic, low-pressure high volume.\n• ETT opening should be beveled type, rounded edge, facing to the left end of the tube with an angle of 38 +/- 100\n• Markings on the tube to know the depth of insertion and fixation at mouth.\n• Specified mention on the tube-\no Nasal/oral\no Outside diameter OD in mm.\no Inside diameter ID in mm.\n item26 1 Nos
28 1.27 Double lumen endotracheal tube:\n• Made of medical grade PVC\n• Left and right sided.\n• All sizes.\n• Bronchial cuff should be of blue color and its pilot balloon should be also of blue color for the ease of differentiating between tracheal & bronchial cuffs.\n• Pre-sterilized, ready for use.\n• Should have pre-inserted stellate to help maintain the shape and curve of the tube.\n item27 1 Nos
29 1.28 Thermoplastic supra-glottic airway device\n• Should have soft non inflatable anatomical seal, epiglottis blocker; buccal cavity stabilizer, integrated bite block; integrated gastric channel for passage of nasogastric tube\n• Size: 1, 1.5,2,3,4,5\n item28 1 Nos
30 1.29 Laryngeal mask airway:\n• Reusable (autoclavable) airway mask with thick main tube wall to reduce the risk of crushing.\n• Flexible tube, transparent.\n• 15mm. male Connector for universal breathing circuit connection.\n• Inflatable, soft, smooth silicone oval mask.\n• Color-coding of the pilot balloon for size identification.\n• Attachment of mask with tube diagonal.\n• Aperture bar at the distal end.\n• Size: 1.0, 1.5, 2.0, 2.5, 3, 4, 5. \n• CE marked\n item29 1 Nos
31 1.3 Laryngeal mask airway:\n• Reusable (autoclavable) airway mask with thick main tube wall to reduce the risk of crushing.\n• Flexible tube, transparent.\n• 15mm. male Connector for universal breathing circuit connection.\n• Inflatable, soft, smooth silicone oval mask.\n• Color-coding of the pilot balloon for size identification.\n• Attachment of mask with tube diagonal.\n• Aperture bar at the distal end.\n• Size: 1.0, 1.5, 2.0, 2.5, 3, 4, 5. \n• Preferably CE marked\n item30 1 Nos
32 1.31 Guedel Airway \n• Disposable, supplied pre-sterilized ready to use.\n• Should have a Rigid body to maintain airway; \n• Soft tip; one piece with re-enforced hollow bite block;\n• Distal end with a flange.\n• All Sizes-000, 00, 0, 1, 2, 3, 4.\n• Color coding\n• Preferably ISO/CE certified\n item31 1 Nos
33 1.32 Nasopharyngeal airway:\n• Made of medical grade PVC\n• Implant tested material marked on the airway.\n• Thermo- sensitive material, which confirms the naso-pharyngeal anatomy.\n• Kink resistance.\n• Smooth outer surface and atraumatic bevel with rounded edges.\n• Enlarged Flange at the distal end to protect the airway from loss in the nasal passage.\n• Size: 4, 5, 6, 7, 8, & 9 mm ID.\n• Should be disposable sterile and ready for use.\n item32 1 Nos
34 1.33 NTUBATING STYLETS \n• Made of malleable material; \n• Latex free; \n• Sterile;\n• Aluminum core (MRI safe);\n• Sizes 6Fr, 10 Fr. ,&14Fr.\n item33 1 Nos
35 1.34 EMERGENCY FAILED INTUBATION TUBE-\n• The tube should have unique double lumen design for rapid establishment of an effective airway through either esophageal or tracheal placement.\n• There should be blind placement, which eliminates the need of laryngoscope.\n• The tube should have pharyngeal balloon, which inflates to hold device firmly in place, and helps prevent the escape of gas through nose or mouth.\n• The tube should have full length lumen which allows for suctioning of gastric content s with no interruption of patient ventilation should the tube airway be placed in the esophagus.\n• Esophaguscuff should inflate to seal the esophagus so that gas does not enter the stomach and gastric content are not aspirated.\n• Should be available in two sizes of 37fr 7 41fr.\n• Tube should have number of holes for better airway passage.\n item34 1 Nos
36 1.35 Percutaneous tracheostomy set with tracheostomy tube:\n• Should be with tracheostomy tube.\n• Should have multiple dilators of different sizes- 14Fr., 21Fr., 24Fr., 27Fr.\n• Guiding catheter over which the dilator is introduced.\n• The guide wire should have position markings.\n• Should have introducer needle with sheath.\n• Should be supplied with essential accessories.\n item35 1 Nos
37 1.36 Tracheostomy Tube With Subglottic Suction.\n• All sizes,\n• Large capacity, low pressure cuff.\n• Should have a separate port for subglottic suction.\n item36 1 Nos
38 1.37 Tracheostomy Tube \n• All sizes,\n• With and without cuff\n• Large capacity, low-pressure cuff.\n item37 1 Nos
39 1.38 CORRUGATED TUBE CONNECTOR\n• Should allow movement of breathing circuit at patient end.\n• Should allow connection between all breathing circuits and the ET tube connector.\n• The corrugated tube should be expandable.\n• Should be made of medical grade PVC.\n• Should be compatible with ETT and tracheostomy tube.\n item38 1 Nos
40 1.39 Catheter mounts with bronchoscopy port:\n• Should be flexible & Extendable\n• Should be having bronchoscopy port.\n• Should be 360 degree rotating head.\n item39 1 Nos
41 1.4 Suction tube 30m coil, 7mm ID with bubble non conductive item40 1 Nos
42 1.41 Suction tube 30m coil 5mm ID with bubble non conductive item41 1 Nos
43 1.42 HME filters for adults: Low dead space, hydrophobic filtration incorporated with heat and moisture exchange filter and with retainable gas sampling port, disposable good quality. item42 1 Nos
44 1.43 HME filters for neonatal: Low dead space, hydrophobic filtration incorporated with heat and moisture exchange filter and with retainable gas sampling port, disposable good quality. item43 1 Nos
45 1.44 HME filters for pediatrics: Low dead space, hydrophobic filtration incorporated with heat and moisture exchange filter and with retainable gas sampling port, disposable good quality. item44 1 Nos
46 1.45 Anti Microbial breathing system heated wire\n• Should be light weight and flexibleto minimize drag on circuits, \n• 1.5m heated inspiratory tubing,\n• Silver impregnated 0.5m humidifier connection tube, \n• Auto float humidification chamber with dual float\n• Sizes: Adult, pediatric, Neonatal.\n item45 1 Nos
47 1.46 SUCTION CATHETER THUMB CONTROLLED\n• Working length should be at least 50cms (working length without Connector) for 10 Fr.& above; should be at least 40 cm. in length below 10 Fr.\n• Should be color-coded and should have open end with lateral eye with length marked in centimeters with male connector with vacuum control device as ISO specifications.\n• Should be in straight soft blister packing.\n• Should have markings on the full length of the tube\n• Should have markings on the catheter.\n• Sizes 6,8,10,12,14,16, and 18 Fr.\n item46 1 Nos
48 1.47 Blood administration set:\n• Preferably CE marked.\n• Manufactured from non-toxic medical grade PVC.\n• Molded cylindrical double drip chamber fitted withsharp plastic spike and nylon filter.\n• Roller type regulator for accurate flow control.\n• Molded bubble latex bulb for extra medication or Y-port.\n• 18G vein needle with protective cap.\n• Double pack.\n• Sterile, ready to use ( by ETO/ Gamma ray)\n• Tube length should not be less than 150 cm., it should be transparent and non-kinkable.\n• The filter shall have uniform pores and shall cover a total area of not less than 10.0 cm2 and shall have pore size of 200 µm. +/- 20 µm and should be clearly mentioned on the package.\n• All PVC items should be certified medical grade only.\n item47 1 Nos
49 1.48 Leucocyte reducing Blood Transfusion set: \nBlood set should have drip chamber and filter with proven leucocyte reduction properties for leucocyte free blood transfusion for organ transplant use. It should have filter size 40 microns and 180 sq. cm of filter area and should have attached IV set with a luer lock tip.\n item48 1 Nos
50 1.49 MEASURED VOLUME SET (Preferably ISO/CE)\n• Should be made up of PVC material\n• Should have soft cylindrical type measure volume chamber with float valve to prevent air embolism\n• The set should have transparent tubing and chamber.\n• Should have capacity of 100ml and 150 ml.\n• Should have drip nozzle with reduced size of drop that has to be uniform at 60 drops/ml.\n• Should have molded bubble latex bulb for extra medication or Y port for injection.\n• Should be sterile ready for use.\n• Should be double packed.\n• Should have short bevel 23 G Vein needle.\n• Should have built in airway for bottle perforating spike (air vent).\n item49 1 Nos
51 1.5 DRESSING FOR THE FIXATION OF I.V. LINE\n• Transparent.\n• Good quality\n• Sizes – 6x7cm; 7x9cm\n item50 1 Nos
52 1.51 SURGIAL TAPE NON WOVEN, VISCOSE RAYON POROUS BACKING (MICRO PORE TYPE PAPER TAPE ) WITHOUT DISPENSER.\nSizes :\n• ½ X 9.10 mtrs.\n• 1 X 9.10 mtrs.\n• 2 X 9.10 mtrs.\n• 3 X 9.10 mtrs.\n item51 1 Nos
53 1.52 TRANSPARENT DRESSING FOR FIXATION OF MULTI LUMEN CATHETER “ TEGADERM TYPE” ORSIMILAR.\nSize – 8.5cm x 10.5cm and 100.5cm x120.5cm\n item52 1 Nos
54 1.53 THREE WAY STOP CONNECTOR (DISPOSABLE) Without Luer Lock\na) Three-way stopcock should be manufactured from medical grade, clear transparent polycarbonate.\nb) It should have three arm handle which should be easy to operate.\nc) Should have minimum residual volume. \nd) Should have rigid construction with circular flow channel to prevent air trap. \ne) Should be provided with two female luer lock ports and one male luer lock port with rotating lock. \nf) Should be sterile and should be individually packed in blister pack.\ng) Its plastic material should be medical grade PVC.\nh) Should have intermediate locking slot.\ni) Male and female connector should be compatible to all needle and IV cannula.\n item53 1 Nos
55 1.54 SPIRAL (POLYETHYLENE) TUBING\n• Should be spirally coiled tubing (polyethylene) for drug infusion (Drug compatible).\n• Size – 100,150,200,300 & 400cm. \n• Preferably US FDA APPROVED\n item54 1 Nos
56 1.55 POLYETHYLENE PRESSURE EXTENSION TUBE\n• Should be polyethylene high pressure extension tube (drug compatible)\n• Size – 11, 30,50,100,150& 200cm. \n• Preferably US FDA APPROVED.\n item55 1 Nos
57 1.56 EXTENSION LINE FOR LIGHT SENSITIVE DRUGS\n• Extension line for light Sensitive drugs (anti UV).\n• Size – 100,150,200cm.\n• Preferably US FDA APPROVED.\n• It should have 200 cm long multichannel tubing to ensure continuous supply.\n item56 1 Nos
58 1.57 Basic Parallel Ventilator Circuit:\n• FDA & CE marked should incorporate with in-line nebulization T Valve with Automatic closer preventing pressure drop. Must be clear construction.\n item57 1 Nos
59 1.58 Flexible Tubing – Silicone:\n• Highly flexible medical grade silicone tubing, autoclavable, can be sterilized by EO.\n• Sizes : 6mm & 8mm;\n• Length of tube roll should be 60.0mtr.\n item58 1 Nos
60 1.59 Patient Identification Band:\n• Patient identification band should be made of skin friendly, non-tear able material. \n• It should have convenient button type locking feature and larger write on space. \n• Colors: Red, White, Green& Blue.\n item59 1 Nos
61 1.6 Surgical gloves:\n• Powder free polymer coated latex surgical gloves\n• Made from natural rubber latex\n• Pouch peel down to open.\n• Sizes: 6, 6.5, 7.0, 7.5, 8.0, 8.5.\n item60 1 Nos
62 1.61 Examination Gloves - Latex Free: \n• Examination Gloves manufactured with 100% latex free material.\n• Gloves should be odor free, powder freeandlatex associated allergy.\n• Should be made of sturdy material that does not get puncture or tear easily. \n• Should have flexible design for easy donning. \n• Should have micro rough texture on fingers. \n• Sizes: Small, Medium, and Large. \n• Box of 100 pieces\n item61 1 Nos
63 1.62 Disposable surgeon face mask - Sterile: \n• Three layermask, whichshould offer excellent (99%) bacterial filtration efficiency. \n• Non- woven breathable fabric, each layer of 25 GSM.\n• Should be super smooth, soft and ultrasonically weldedair permeable for comfortable use.\n• Should have flexible nose clip (rust free PVC coated) for proper positioning on the nose bridge. \n• Size: 17.5 X 9.6 cm. Tie string: 90 cm.\n• Should be sterile & should be individually packed in poly pack.\n item62 1 Nos
64 1.63 Surgeon’s cap- disposable:\n• Should be of good quality\n• Made from non-woven breathable fabric of 35 GSM\n• Well fitting with back elastic or string.\n• Air permeable.\n• Properly ultrasonically sealed for uniformity.\n• Different sizes & color.\n item63 1 Nos
65 1.64 Female crimp cap, disposable:\n• Should be of good quality.\n• Made from non-woven breathable fabric of 15 GSM\n• Well fitted with double elastic or string.\n• Air permeable.\n• Properly ultrasonically sealed for uniformity.\n item64 1 Nos
66 1.65 Surgeon’s Gown:\n• Blue color.\n• Made from non-woven spun lace fabric breathable but impermeable to blood and water\n• Re-enforced front to provide 100% protection against any amount of blood and fluid in user-friendly packing.\n• Gamma irradiated.\n• Preferably have CE mark.\n item65 1 Nos
67 1.66 Disposable gowns (for attendants):\n• Purple color\n• Moisture repellent properties\n• Made of non-woven fabric\n• Size: Medium, Large and Extra large\n• Length -150 cm, width- 160 cm.\n item66 1 Nos
68 1.67 Complete kit for HIV/HBV patient:\n• Disposable surgeon gown with waterproof inter-lining on chest & arms.\n• Hood cap (Monkey cap)\n• Face mask with eye shield\n• Long shoe cover\n• Arm guard\n• Cut sheet – 1.\n• Slit sheet- 1.\n• Draw sheet: 220 X 120 cms- 4 Nos.\n• Trolley cover latex laminated – 135 X 20 cms- 4 Nos.\n• Mayo stand cover- 1 No.\n• Patient drape sheet- 1 No.\n• Suture bags- 2 Nos.\n• Disposable bag- 1 No.\n item67 1 Nos
69 1.68 Disposable shoe cover:\n• Should be of good quality (thick)\n• Made from non-toxic non-woven, thick fabric.\n• Well stitched in universal regular size.\n• Skid resistant & dust proof.\n• Hard elasticated for better grip and easy to wear.\n• Should cover the ankles.\n• Size: Assorted- (Std. size of shoe from 7 to 12) & blue color.\n item68 1 Nos
70 1.69 Disposable Foley’s Catheter (2 way) – Adult &Paed:\n• Disposable 2 way latex Foley catheter\n• Should bemanufactured from natural rubber latex coated with silicone so as to eliminatethe risk of encrustation. \n• Should have symmetrical large capacity balloon to ensure a straight tip andproper flow for good sphincter action to preventbladder leakage. \n• Should have coned distal end with burr free eyes for a-traumaticinsertion.\n• Should have hard valve to ensure easy inflation and deflation of balloon.\n• Balloon capacity- 3-5 ml for pediatric and 30 to 50 ml for adult catheter.\n• Length- 20-30 cm.\n• Should have colour coded for instant size identification.\n• Should be sterile and should be individually packed in peel-able pack. \n• Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 24 Fr.\n• Preferably ISO 9002 CE marking confirming ASTM- F623-99 Guideline specification for Foley’s catheter.\n item69 1 Nos
71 1.7 DISPOSABLE SYRINGE & NEEDLE ALL SIZES\na) Syringes should be of clear PVC with clear markings\nb) Should have rubber seal in the piston\nc) Needles should be appropriate size and thickness.\nd) Sterilized, disposable.\ne) ISI/ ISO/ CE\nf) Sizes: 1ml, 2ml, 5ml, 10ml.\n item70 1 Nos
72 1.71 50ml SYRINGE(with luer lock)\na) Should be made of clear PVC. \nb) Should have rubber seal in the piston\nc) Should have a luer lock\n item71 1 Nos
73 1.72 ABSORBABLE DISPOSABLE PILLOW COVER FOR STANDARD SIZE 75X55CM item72 1 Nos
74 1.73 DISPOSABLECHAMBER FOR BAL COLLECTION WITH ADAPTER\nDisposable sterile container for Bronchoscopy application.\n item73 1 Nos
75 1.74 EPIDURAL CATHETER WITH NEEDLE\n• Single sterile pack should contain Epidural catheter with 1cm markings, \n• Kit should contain epidural needle, bacterial filter and detachable injection port. \n• Should be available in sizes 16 G, 18 G for adult and 22-24G for Pediatric. \n item74 1 Nos
76 1.75 Bite block size 4: Bite block size 4 for oral fixation of ETT size 6.5-8.0mm, Laryngeal Tube size 2 & 2.5 tube should clip into the bite block for protection against occlusion. item75 1 Nos
77 1.76 Bite block size 5 :-Bite block size 5 for oral fixation of ETT size > 8.5mm, Laryngeal tube Size 2 & 2.5 LMA 2 & 2.5 tube should clip into the bite block for protection against occlusion. item76 1 Nos
78 1.77 Bite block Size 6:Bite block size 6 for oral fixation of laryngeal Tube size 3,4,&5 and LMAs, Tube should clip into the bite block for protection against occlusion. item77 1 Nos
79 1.78 Medical grade soda lime CO2 absorbent granules Specification:\n• Medical grade best quality soda lime granules. Hardness, moisture and absorption should be international agency certified. Should be good quality for closed circuit. There should be high contrast pink to white color change after absorbent capacity is exhausted. Pack size should be 5 liter/container.\n item78 1 Nos
80 1.79 Disposable DVT Sleeve (Calf & Thigh) item79 1 Nos
81 1.8 Disposable DVT Sleeve (calf) item80 1 Nos
82 1.81 Specification for BIS Sensors \n• It should have four sensors element to capture, recognize and discard artifact.\n• Connector should provide secure click-in connection with push button release\n• It should include an additional above eye element, which captures critical eye motion data, along with other important physiological signals.\n• It should have flexible design adjusts to different head sizes\n• It should have FDA approval\n• Should be supplied by authorized channel partner from principal company/ manufacture. Electrode Gel: Potassium Chloride (KCl) , latex free. Sizes ADULT and PEDIATRIC\n item81 1 Nos
83 1.82 NIRS SENSORS. ADULT AND PEDIATRIC item82 1 Nos
84 1.83 DISPOSABLE PULSE OXIMETER SENSORS (SP02)\n• Should be compliant with the equipment intended to continuously estimate and display non-invasively a patient's arterial blood oxygen saturation and pulse rate. \n• Proposed sensors must comply with NellcorTechnology.\n• Digit sensors should be available in Adult, Pediatric, Neonatal and Infant sizes to accommodate diverse patient sizes, weights and needs.\n• Seller must have all types of sensors available (e.g., finger, forehead, and ear). Sensor must be available in Adult, Pediatric, Infant and Neonatal Sizes. \n• Sensor extension cables must be available in 4' and 9' lengths.\n• The sensors must be compatible with all generations of NellcorOximetry Technology in NellcorOximeters and OEM/Licensee Multi-para meter systems with all generation of Nellcor technology.\n• The sensor shall resist inadvertent displacement.\n• The sensor shall resist interference from ambient light.\n• The sensors shall not be adversely affected by fluid spills or common disinfectant solutions.\n item83 1 Nos
85 1.84 Disposable ECG electrode (Adult):\n• Should have a good sticking material, solid gel, covered by translucent/ transparent thin sheet.\n• Should be hypo-allergic & certificate should be attached.\n• Sensor should be good quality, preferably of silver.\n• Should be usable even if the chest is hairy.\n• Should have buttons (metal snap: stainless steel stud) for attachment to ECG electrodes.\n• Should have white label indicating brand mark.\n item84 1 Nos
86 1.85 Infant feeding tube:\n• Size: 3 to 10 Fr., color-coded.\n• Silken smooth tube, medical grade siliconized PVC.\n• X-ray opaque line.\n• Fitted with female luer mount with built-in stopper/ lid.\n• Packed in peel-off pouch, not coiled packing.\n• Sterilized ready to use.\n• Length of tube minimum- 50 +/- 5 cm.\n• Smooth rounded tapered distal end with two lateral eyes.\n item85 1 Nos
87 1.86 Urine collection bag with transparent volume chamber:\n• Sterile ready for use.\n• Bag should be manufactured from clinical grade transparent PVC.\n• Capacity- 2000ml.marked in increments of 50 ml.\n• Fitted with non-return valve to avoid spillage.\n• One-meter long super smooth, highly flexible non-kinkable tube which should provide approx. 6.5 mm diameter with universal male connector.\n• Leak proof, single piece/ wielded manufacture.\n• Provided with hanging device to be fitted on to the bed.\n• Stopper drain should be attached with the bag.\n item86 1 Nos
88 1.87 Clinical thermometer:\n• Good quality.\n• Digital\n• For oral temperature measurement.\n item87 1 Nos
89 1.88 Glucometer test strip:\n• Accuracy- error not more than +/- 20%.\n• Sample size should not be more than 5µL.\n• Test time should not be more than 10 sec.\n• Interference with commonly used drugs & other agents, which can affect blood glucose measurement, should be declared.\n• Shelf life of strip should be more than 1 year.\n• Shelf life of strips after opening should be up to 6 months.\n• Glucometer should be free from coding or calibration requirement in order to minimize errors at user level.\n• Should be available in a minimum pack size of 25 strips.\n• Glucometer should start testing only when the strip has absorbed the required sample size in order to minimize wastage of strips.\n• Operating temperature should be 10- 400 C.\n• Measurement range between 10mg/dl and 600mg/dl.\n• Battery should be able to do 1000 tests approximately and should run preferably on AAA battery, which is economical.\n• Preferably US FDA approved, CE marked.\n item88 1 Nos
90 1.89 Metered incentive spirometer:\n• Volumetric lung exercise with dual printed scale.\n• Good-Better-Best flow cup to encourage slow and deep breathing exercise.\n• Advanced low work of breathing design.\n• Built-in handle for ease of use.\n• Sensitive & light weight bellow to detect smaller volumes.\n• Latex free compact ergonomic design.\n• Smooth mouthpiece with in-built dust particle filter.\n• Size: 2500 ml & 4000 ml.\n item89 1 Nos
91 2 Group B: Cardiac surgery and perfusion items
92 2.01 FIBRIN GLUE\nFibrin base sealant to stop surgical bleeding with proven technology\n item90 1 Nos
93 2.02 AORTIC PUNCH\n• Blade should be able to float around the punch.\n• Punch should be available with tapered cutting blade to increase visibility.\n• Should be available in all functional sizes \n item91 1 Nos
94 2.03 Coronary artery retraction clips Sizes 3mm and 5mm\n• Should be designed to improve exposure to a coronary anastomosis site. Should be able to small prongs and gently hold tissues away from the vessel to improve vision.\n item92 1 Nos
95 2.04 Temporary pigtail pacing wire\n• Should include unipolar atrial and ventricular pacing, pediatric unipolar pacing, and the bipolar pacing lead.\n item93 1 Nos
96 2.05 Tissue Stabilizer for beating heart\n• Should be a low profile tissue stabilizer with auto spread feature of pods.\n item94 1 Nos
97 2.06 Heart positioner for beating heart\n• Should be a low profile positioner for off apex position use/ to lift the heart.\n item95 1 Nos
98 2.07 Tissue Stabilizer for Minimally invasive beating heart surgery.\n• Should be stabilizer to be used via thoracotomy with detachable shaft and should have fully rotating pods.\n item96 1 Nos
99 2.08 Heart positioner for Minimally invasive beating heart surgery\n• Should be a positioner with detachable shaft for MICS via thoracotomy.\n item97 1 Nos
100 2.09 Mist Blower\n• Should have specialized nozzle utilizing a micro orifice for fluid delivery and a separate orifice for gas delivery. Should have the malleable shaft and on/off control on the hand piece.\n item98 1 Nos
101 2.1 Arteriotomyshunts(Intra Coronary Shunts)\n• Sizes 1.0,1.25,1.5, 1.75, 2.0,2,5,2.5, 2.75 & 3.0mm.\n• Should be beveled tip.\n• Should have fully transparent body.\n item99 1 Nos
102 2.11 ACT Cartridges item100 1 Nos
103 2.12 SPECIFICATION FOR INTRA AORTIC BALLOON CATHETER\n• IAB Catheter should be of 7.5 Fr with displacement volume of 24cc, 34cc & 40 cc. and 8Fr with volume displacement 50cc.\n• It should be more abrasion resistant and have good fatigue resistance\n• Should immediate inflate at start up without manual filling of the catheter.\n• It should be compatible with Data scope /Arrow pumps\n• It should have exact 7.5Fr size sheath and dilator set.\n• It should have 0.025 3mm J PTFE stainless steel guide wire.\n• Preferably US FDA approved.\n item101 1 Nos
104 2.13 EMERGENCY CRICOTHYROIDOTOMY SET :\n• Should have a conical introducer, \n• Dilators should be made of stainless steel, \n• Cricothyroidotomy tubes should be of medical grade plastic.\n• With 15 mm connector,flexible tube extension made of silicone, scalpel,one way syringe,comfort neck band \n• Sizes 2mm, 4mm.\n item102 1 Nos
105 2.14 MICRO AGGREGATE BLOOD FILTER FOR RED CELL TRANSFUSION\n• Filter media should be 40 micron rated polyester screen media with uniform pore size\n• Should have total filter surface area of > 170 Sq.cm\n• Should have average capacity of filtering 10 units of blood.\n item103 1 Nos
106 2.15 PACKED RED CELL & WHOLE BLOOD LEUCOCYTE REDUCTION FILTERS.\na. Bedside filtration of one & two unit of packed red blood cells or whole blood\nb. Should have universal spike with microbiological recovery vent\nc. Should be with attached straight administration set/automatic self leveling drip chamber\nd. Performance should consistently average less than 2x105 residual leukocytes per unit\ne. Red cell recovery should average greater than 90%.\nf. Filter housing hold up volume should be <25ml for one unit filter and <35ml for two unit filter\ng. It should be single use\nh. Should be latex free\n item104 1 Nos
107 2.16 SPECIFICATION FOR FORCED WARMING BLANKET\n• Should be disposable and two layered;\n• Should consist of non woven propylene fabric for body warming.\n• Should be usable with forced air warming units.\n• Material should be latex free and should meet flammability standard 16 CPR 1610 for safety.\n• The manufacturer must have all the below listed types of blankets and should quote the prices separately for separate blankets\n? Full Body Adult\n? Underbody Adult with Arm and Head Openings\n? Pediatric Full body\n? Pediatric underbody Blanket.\n• Should be compatible with common machines.\n• Should be CE certified\n item105 1 Nos
108 2.17 LV Vent:\n• Left ventricular vent should consist of round tipped dual lumen tube with lateral eyes, suture collars & proximal funnel connectors used for emptying the Left Ventricle for clearer view during surgery. All sizes.\n item106 1 Nos
109 2.18 AntegradeOstialCardioplegia Cannula - All Size: \n• Antegrade-cardioplegia cannula should be made of soft 100% silicone conduit with distal bulbous end & should have luer lock connector at the proximal end for administration of cardioplegia solution into the coronary ostia. Sizes: 3.5, 4, 4.5, 5, 5.5, 6 mm.\n item107 1 Nos
110 2.19 Cardioplegia Cannula Size Infant: \n• Cardioplegia cannula should be made of soft 100% silicone & should be tapered conduit with distal open tip having adjacent lateral eyes, followed by a flange for secure positioning. It should have proximal luer lock & a SS needle with hub. Size: Infant.\n item108 1 Nos
111 2.2 Arterial cannula for arch cannulation Sizes 20FR -24 Fr.\n• Should have elongated one piece wire wound body with radiopaque suture ring and dilator with depth markings.\n item109 1 Nos
112 2.21 Axillary artery one piece cannula with central arterial pressure measurement \n• Sizes 18 Fr.-24Fr.Should have elongated one piece wire wound body with radiopaque suture ring and dilator with depth markings. Should have integrated pressure monitoring port at tip\n item110 1 Nos
113 2.22 One piece Pediatric Aortic cannula Size 6FR-16 Fr Vented\n• Should be beveled with thin wall tips and should be elongated one piece.\n item111 1 Nos
114 2.23 Straight Tip Arch cannula Sizes 8Fr-24 Fr vented and Non vented; Pediatric and Adult\n• Should be beveled thin wall tips attached to tapered cannula bodies. Should be available in pediatric and adult sizes.\n item112 1 Nos
115 2.24 Angled tip Arterial cannula Sized 8 Fr -24 Fr\n• Should be beveled thin wall tips attached to tapered cannula bodies. Should have kink resistant wire wound bodies.\n item113 1 Nos
116 2.25 Arterial cannula angled with diffused flow tip Sizes 18 Fr-24Fr\n• Should be one piece wire wound body with integrated flutes for diffused flow.\n item114 1 Nos
117 2.26 Femoral one piece Arterial and venous cannula kit \n• Sizes 8-21 Fr. arterial and 8-29 Fr. Venous cannula\n• Should be one piece wire wound body.\n item115 1 Nos
118 2.27 Femoral Multistage venous cannula \n• Sizes: 29/29/29 Fr and 29/46/37 Fr\n• Should be one piece wire wound multiple side holes body with percutaneous kit.\n item116 1 Nos
119 2.28 Standard insertion kit for femoral cannulation item117 1 Nos
120 2.29 Carpentier Bi-caval femoral venous cannula \n• Sizes : 24/29 Fr, 30/33Fr\n• Should have wire wound kink resistant two stage design.\n item118 1 Nos
121 2.3 Single stage venous cannula with Metal tip Sizes 12-31 Fr\n• Should have kink resistant wire wound taper body with beveled metal tip.\n item119 1 Nos
122 2.31 Single stage Venous cannula with right angle Sizes 12-40 Fr\n• Should have kink resistant wire wound taper body with tapered multiport tips. Should be right angled with plastic tip.\n item120 1 Nos
123 2.32 Single stage straight venous cannula malleable Sizes 12-40 Fr\n• Should have kink resistant malleable wire wound taper body with tapered multiport tips.\n item121 1 Nos
124 2.33 Double-stage venous cannula round and oval shape Sizes 28/36,36/46,32/46, 36/51, 32/40, 36/46 Fr.\n• Should be two-stage cannula with oval body in various sizes. Should be two-stage cannula with round body in various sizes. Should have cannula body with thin walled with depth markings.\n item122 1 Nos
125 2.34 Three stage venous cannula Sizes 29/29/29 Fr 29/46/37 Fr\n• Should be three stage venous cannula for VacuumAssisted Venous Drainage(VAVD)/Kinetic Assisted Venous Drainage(KAVD)\n item123 1 Nos
126 2.35 Multiple Stage Venous cannula Sizes 23 Fr and 29 Fr\n• Should have polyurethane wire wound body with radiopaque markers and multiple holes at distal end.\n item124 1 Nos
127 2.36 Aortic root cannula Sizes 4 Fr-11 Fr\n• Should have radiopaque tips attached to clear PVC bodies. Additional features: aortic root pressure monitoring and left heart venting. Can be used to aspirate air emboli as well administer cardioplegia.\n item125 1 Nos
128 2.37 Aortic root cannula with Vent line Sizes 5 Fr-11 Fr\n• Should have radiopaque tips attached to clear bodies with separate vent line.\n item126 1 Nos
129 2.38 Aortic root cannula pediatric Neonatal Sizes 4 Fr\n• Should be able to aspirate air from Aorta, Should have radiopaque tip and standard 50.5 in length or a shortened 2.5 in.\n item127 1 Nos
130 2.39 Cardiopleiga needles: Neonatal, Pediatric and Adult Sizes. 5Fr and 8 Fr\n• Should have stainless steel tip with plastic depth stop, Needle should be attached to Flexible PVC tubing which should include a drape clamp and female luer. \n item128 1 Nos
131 2.4 Silicon Ostial cannula for continuous perfusion Sizes 15 Fr,17Fr and 20 Fr\n• Should have a silicon body with soft bulb shaped tips, should have a female luer connection site.\n item129 1 Nos
132 2.41 Ostial perfusion cannula with basket tip and soft convex tip Sizes 10 Fr, 12 Fr and 14 Fr.\n \n• Should have flanged, radiopaque basket tips/soft tips attached to malleable stainless steel shafts.\n item130 1 Nos
133 2.42 Minimally invasive Aortic root cannula with length more than 30 cm\n• Should have more than 30 cm long body to allow insertion during MICS\n item131 1 Nos
134 2.43 Minimally invasive retrograde cardioplegia cannula with deflecting tipSizes 13 and 15 Fr\n \n• Should have tip deflecting models for sinus placement through thoracotomy should be able to allow minimum 10mm sweep. Should be auto/ manual inflatable.\n item132 1 Nos
135 2.44 Retrograde cardioplegia cannula with Auto inflate Sizes 13 Fr and 15 Fr\n• Should have silicon/ PVC bodies with auto inflatable cuff and pressure monitoring lines; should have multiport tip/ integral stopcock.\n item133 1 Nos
136 2.45 Multiple perfusion set\n• Should be able to allow simultaneous perfusion of the aortic root and up to three or more vein graftsshould have inlet ports with male or female luer and clamps attached to an adapter that can split into four or more legs.\n item134 1 Nos
137 2.46 Distal perfusion kit\n• Should be able to perform simultaneous perfusion of Aortic root and upto 3 or more vein grafts.\n item135 1 Nos
138 2.47 Left Heart Vent Catheters Sizes 10 Fr,13Fr,15Fr, 16Fr,18Fr,20Fr,24Fr\n• Should be of PVC or silicon, could be used for direct and indirect venting, should have perforated tip, malleable bodies with depth mark. Should have a choice of either PVC or Silicone along with straight body with depth marking. All ventsshould terminate with a vented or non vented ¼ in connector.\n item136 1 Nos
139 2.48 Pericardial Sumps Sizes 20 Fr\n• Should feature a fluted tip, should be encased in a stainless steel spring and should have weight at the end.\n item137 1 Nos
140 2.49 Intra-cardiac sump Size 20 Fr\n• Should feature a perforated pool tip to maximize suction and minimize tissue trauma. The tip design should be ideal for atraumatic suction within the heart chambers.\n item138 1 Nos
141 2.5 Suction Tube Sizes 6 Fr,10Fr and 20 Fr\n• Should have variety of cardiac suction tubes, intracardiac suction tubes & rigid suction tubes.\n item139 1 Nos
142 2.51 Micro Suction tubes Sizes 9 Fr\n• Should have a vacuum control port, malleable shaft, should equipped with a length of tubing and clamp terminating with a ¼ in (0.64cm) connector.\n item140 1 Nos
143 2.52 Macro Rigid suction tubes Sizes 20 Fr\n• Should have tip made up of stainless steel, should have fluted pool tip to maximize suction and minimize tissue trauma, should offer gentle suction.\n item141 1 Nos
144 2.53 PA vent cannula\n• Should have a soft, pliable tip with female luer end; should have movable depth marker and an introducer needle should be included.\n item142 1 Nos
145 2.54 Tourniquet Sets Sizes 12 Fr, 16 Fr and 19 Fr.\n• Should have color coded tubes with varying lengths for adults and pediatric, should have wire snares included with the tube set.\n item143 1 Nos
146 2.55 Arteriotomy Cannula Sizes 2mm, 3mm, 4mm, 5mm, 6mm\n• Should have polyurethane tube with a bulb shaped tip connected to winged female luer.\n item144 1 Nos
147 2.56 Rapid priming set Length 35cm and 40cm\n• These should facilitate the transfer of fluid during the priming of the circuit. Should have large bore spikes attached to flexible tubing with a clamp. Should terminate with either an open end tube or a male luer.\n item145 1 Nos
148 2.57 Rapid Priming”Y” Set Length around 1 m\n• These should facilitate the transfer of fluid during the priming of the circuit. Should have large bore spikes attached to flexible tubing with a clamp. Should attach to a “ Y” adapter with a length of tubing and another clamp.\n item146 1 Nos
149 2.58 SPECIFICATION FOR ADULT OXYGENATOR\nPriming volume should be less than 300 ml.\nBlood flow range should be 0-7lts/min.\nOxygen transfer should be atleast 400ml/min.\nHeat exchange efficiency should not be less than 0.50.\nHousing material should be of polycarbonate.\nSurface area of the fibers should be from 1.4m2to 2.4m2\nHeat exchanger should be made of stainless steel and surface area should be approx.0.40 m2\nBlood inlet port (from pump) - 3/8\nBlood outlet port - 3/8\nCardioplegia port - ¼\nGas Inlet port - ¼\nGas Outlet port - ¼\nWater Ports - ½\nMaximum Pressure - Blood inlet 1000mmHg, Water Inlet 42 PSI\n• Blood storage capacity of hard shell reservoir should be approx. 4000ml or more.\n• Minimum operating volume of reservoir should be 200ml.\n• Hard shell reservoir should have cardiotomy filter and de-foaming part\n• Hard-shell reservoir should have venous filter with pore size 452mm\n• The hard-shell reservoir should have\nVenous blood inlet port - ½\nBlood outlet port (to pump) - ?\nSuction ports (six) - ¼\nVertical port to CR Filter- ¼\nQuick Prime port - ¼\nAuxiliary port - ¼-?\n• Sustainable negative pressure should be 15010mmHg\n item147 1 Nos
150 2.59 SPEICIFICATION FOR PEDIATRIC OXYGENATOR\nPriming volume should beless than 150ml.\nBlood flow range should be 0.40.01ltrs/min.\nOxygen transfer should not be less than 250ml/min.\nPressure drop should be least-up to 100mmHg or less.\nHeat exchange efficiency should not be less than 0.65.\nHousing material should be of polycarbonate.\nSurface area of the fibers should be approx 1.0m2.\nHeat exchanger should be made of stainless steel and surface area should be approx 1300cm2.\nBlood inlet port - 3/8\nBlood outlet Port - 3/8\nCardioplegia port - ¼\nGas Inlet Port - ¼\nGas Outlet port - ¼\nWater Port - ½\nMaximum Pressure - Blood inlet 1000mmHg, Water Inlet 42 PSI\n• Blood Storage capacity of hard shell reservoir should be max 3000ml.\n• Minimum operative volume of hard shell reservoir should be 100ml.\n• Hard-shell reservoir should have cardiotomy filter and defoaming part.\n• Hard-shell reservoir should have venous filter with pore size should be 20mm\n• The hard-shell reservoir should have \n• Venous blood inlet port - 3/8 rotatable\n• Blood outlet port (to pump) - 3/8\n• Suction port(six) - ¼\n• Vertical port to CR filter - 3/8\n• Quick prime port - ¼\n• Auxiliary port - 3/8\n item148 1 Nos
151 2.6 SPECIFICATION FOR NEONATAL OXYGENATOR\nBlood flow range should be 0.1 – 2 liters/min.\nPriming Volumes should be around 40 ml.\nOxygen transfer should be minimum 100 ml/min.\nPressure drop should be least up to 100mmHg or less.\nHeat exchange efficiency should not be less than 0.65.\nHousing material should be of polycarbonate.\nSurface area of the fibers should be ˜0.5m2 and material should be micro porous polypropylene.\nHeat exchanger should be made of stainless steel and surface area should be approx 0.035m2.\nBlood inlet port (from pump) - ¼\nBlood outlet port - ¼\nLuer port (for recirculation or blood cardioplegia) one luer lock on blood outlet\nGas inlet port - ¼\nGas outlet port - 5/16\nWater ports - ½\nMaximum pressure - Blood inlet 1000mmHg, Water inlet 2Kgf/cm2\nBlood storage capacity of hard shell reservoir should be 1000ml\n• Minimum operating volume of hard-shell reservoir should be 15ml\n• Hard-shell reservoir should have cardiotomy filter and defoamer\n• The hard-shell should have\n• Venous blood inlet port - ¼\n• Blood output port (to pump) - ¼\n• Suction port (five) - 3/16\n• Quick prime port - ¼\n• Vent port - ¼\n• Auxiliary port - ¼-3/8\nMaximum sustainable negative pressure in reservoir -150mmHg\n item149 1 Nos
152 2.61 SPECIFICATIONS FOR PEDIATRIC ARTERIAL FILTER WITH BYPASS LOOP\nThe Arterial Filter should be for pediatric use.\nPriming volume should not be more than 90ml\nFilter pore size should be 40 micron.\nThe outlet and inlet blood posts should be 3/8. Purge line (one way valve)\nThe filter should allow maximum blood flow rate of 5.0L/min.\nThe filter should be provided with a bypass loop at the inlet and outlet port.\n item150 1 Nos
153 2.62 SPECIFICATIONS FOR CARDIOPLEGIA HEAT EXCHANGER(BCD) \nIt should have priming volume less than 50 ml.\nBlood flow rate should be between 0-600 ml/min\nFilter screen should be around 100 um.\nInlet connection should be ¼and outlet connection should be 3/16.\nHeat exchange surface area should be ˜.20m2.\nHeat exchange should be of stainless steel corrugated pipes.\nBubble trap should be integrated for highly efficient de-bubbling\nIntegrated by pass manifold for easy de-bubbling\nExchangeable water in /water out\nBlood flow path bottom up\nIt should have a Stopcock Prime/ Perfusion for easy priming.\nIt should have tip in the surgeon pack so that it can be connected to cardioplegia cannula.\nIt should be available both in 4:1 and 1:4 configurations.\n item151 1 Nos
154 2.63 SPECIFICATION FOR PEDAITRIC HEMOCONCENTRATOR\nIt should have priming volume approx 35ml.\nEffective surface area of the Fibers should be approx 0.5m2.\nBlood port should be ¼with Luer locks.\nFiltrate port should be ½.\nMaximum Trans-membrane Pressure should be 500mm Hg.\nIt should have tubing lines along with reservoir Bag.\n item152 1 Nos
155 2.64 SPECIFICATION FOR ADULT HEMOCONCENTRATOR\nThe priming volume should be 70 ml\nEffective surface area of the fibers should be ˜1m2.\nBlood port should be ¼ With Luer locks\nFiltrate port should be ½ (1/4adapter).\nBlood flow range should be 100-500ml.\nMaximum Trans-membrane pressure should not be more than 500mm Hg.\nIt should have tubing with reservoir bag.\n item153 1 Nos
156 2.65 SPECIFICATION FOR NEONATAL HEMOCONCENTRATOR\nIt should have priming volume less than 20 ml.\nMembrane surface area should be ˜0.2m2.\nMax Membrane pressure should not be more than 600mm Hg.\nCapillary wall thickness should be ˜50um.\nIt should have inlet/outlet lines, male luer lock connections, filter safety cap, filtrate line and additional filtrate bag (200ml).\n item154 1 Nos
157 2.66 SPECIFICATION FOR CUSTOM TUBING PACK\nCustom Tubing Pack Adult.\nCustom Tubing Pack with arterial filter with PVC tubing medical grade -6 as per AIIMS C.N.Centre design.\nFilter/Tubing should be CE/USFDA Approved., purge line. (one way valve)\n• Custom Tubing Pack pediatric with PVC tubing medical grade – 6Filter/Tubing should be CE/US FDA Approved\n• Custom Tubing Pack with neonatal arterial filter with PVC tubing medical grade-6Filter/Tubing should be CE/USFDA Approved\n• Custom tubing packs with 3/16arterial and ¼ venous lines for small neonates. Made from medical grade-6 PVC. Filter/Tubing should be CE/USFDA approved \n item155 1 Nos
158 2.67 EXTRA CORPOREAL MEMBRANE OXYGENATOR (NEONATAL)\nECMO should have a validation for 14 days and should be phthalate free (NO DOP).\nMembrane used should be of polymethylpentene fibers.\nPriming volume should be 100 ml.\nShould have contact surface area ˜0.70 square meters.\nShould cater for blood flow from 0.2 to 1.5 L/min.\nHeat exchanger surface area should be ˜0.4 square meter.\nHeat Exchanger performance factor should be of 0.77 ( 1.5 liter /min).\nOxygenator and tubing should have coating of Phosphorylcholine.\nInlet and outlet connector preferred is 1/4 (6.35 mm).\n item156 1 Nos
159 2.68 EXTRA CORPOREAL MEMBRANE OXYGENATOR (PAEDIATRIC)\nECMO should have a validation for 14 days and should be phthalate free ( NO DOP).\nMembrane used should be of polymethylpentene fibers.\nShould have priming volume 200 ml.\nShould have contact surface area of around1.4 square meters.\nShould cater for blood flow from 0.3 to 4 liter /min.\nHeat exchanger should have surface area of ˜0.8 square meter.\nHeat exchanger per-formance factor should be of ˜0.6 ( @ 4 liter /min).\nOxygenator and tubing should have coating of Phosphorylcholine(PC).\nInlet and outlet connections preferred is 3/8(9.53 mm)\n item157 1 Nos
160 2.69 EXTRA CORPOREAL MEMBRANE OXYGENATOR (ADULT)\nECMO should have a validation for 14 days and should be phthalate free (NO DOP).\nMembrane used should be of polymethylpentene-fibers.\nShould have priming volume of˜200ml.\nShould have contact surface area of 1.7-1.9 square meters.\nShould cater for blood flow from 4 to 7 liters/ min.\nHeat exchanger should have surface area of ˜0.8square meter.\nHeat exchangerperfor-mance factor should be ˜0.6 ( @ 4 liters /min).\nOxygenator and tubing should have coating of Phosphorylcholine.(PC)\nInlet and outlet connections preferred is 3/8 (9.53 mm)\n item158 1 Nos
161 2.7 SPECIFICATION FOR ADULT OXYGENATOR( Integrated with arterial filter & heat exchanger)\n• Oxygenator should have integrated arterial filter with cardiotomy/ venous reservoir.\nShould have integrated arterial filter with self venting technology.\nHeat exchanger surface area should be no more than 0.2m2.\nVenous filter should be 50micro meter.\nPriming volume should not be more than 250ml.\nBlood flow range should be 0.5 to 7 LPM.\nHeat exchange efficiency should not be less than 0.50 at max flow.\nPressure drop should be minimum up to 110 mmHg or less.\nArterial filter should be 35micron meter.\nMembrane surface area should be 2-2.5 m2.\n item159 1 Nos
162 2.71 SPECIFICATION FOR SMALL ADULT OXYGENATOR (Integrated Filter and Heat Exchanger)\nOxygenator should have integrated arterial filter with cardiotomy/venous reservoir.\nShould have integrated arterial filter with self venting technology.\nHeat exchanger surface area should be no more than 0.14m2.\nVenous filter should be 50micro meter.\nPriming volume should not be more than 150ml\nBlood flow range should be 0.5 to 5 LPM.\nHeat exchange efficiency should not be less than 0.5 max flow @ 5 LPM\nPressure drop should be minimum up to 110 mmHg or less.\nArterial filter should be35micro meter.\n item160 1 Nos
163 2.72 SPECIFICATION FOR PAEDIATRIC INFANT OXYGENATOR(Integrated Filter and Heat Exchanger)\nOxygenator should have integrated arterial filter with cardiotomy/ venous reservoir.\nShould have integrated arterial filter with self venting technology.\nHeat exchanger surface area should be no more than 0.035m2.\nVenous filter should be50micro meter.\nPriming volume should not be more than 45ml.\nBlood flow range should be 0-2.5Ltrs/min.\nHeat exchange efficiency should not be less than 0.6 at max flow.\nPressure drop should be minimum up to 100mmHg or less @ 1.5 LPM\nArterial filter should be35micro meter.\n item161 1 Nos
164 2.73 Arterial Perfusion CannulaeAdult.\n• Non-wire reinforced beveled tip Size 18Fr, 20Fr, 22Fr and 24 Fr. Overall lengthshould be approx.15cm with suture bump.\n item162 1 Nos
165 2.74 Arterial Perfusion Cannulae Pediatric \n• Sizes: 8Fr, 10Fr, 12Fr,14Fr and 16Fr.\n• Non wire reinforced bevel tip. \n• Overall length 18cm with suture bump.\n item163 1 Nos
166 2.75 Venous Cannulae Single Stage. (neonate)\n• Thin Flexible wire reinforced straight open light house tip. Overall length approx.28cm with ¼ acceptance size 12Fr, 14Fr and 16Fr\n item164 1 Nos
167 2.76 Venous Cannulae Single Stage(pediatric)\n• Thin Flexible wire reinforced straight open light house tip. Overall length approx. 35cm with ¼and 3/8 acceptance Size 18Fr, 20Fr, 22Fr and 24Fr.\n item165 1 Nos
168 2.77 Venous Cannulae Single Stage(small adult)\n• Thin flexible wire reinforced straight open lighthouse tip. Overall length 35cm with 3/8 acceptance Size 26Fr and 28Fr.\n item166 1 Nos
169 2.78 Venous Cannulae Single Stage(adult)\n• Thin Flexible wire reinforced straight open lighthouse tip. Overall length should be approx.40cm with 3/8 acceptance Size 30Fr, 32Fr, 34Fr, 36Fr, 38Fr and 40Fr.\n item167 1 Nos
170 2.79 Venous Cannulae Right Angled\n• Wire reinforced 900 angled plastic tip 10Fr, overalllength approx.28cm and ¼ acceptance.\n item168 1 Nos
171 2.8 Venous Cannulae Right Angled\n• Wire reinforced 900 angled plastic tip 12Fr, 14Fr and 16Fr. Overall length should be approx. 33cm with ¼& 3/8 acceptance\n item169 1 Nos
172 2.81 Venous Cannulae Right Angled\n• Wire reinforced 900 angled plastic tip 18Fr and 20Fr. Overall length should be approx. 35cm with 3/8 acceptance\n item170 1 Nos
173 2.82 Venous Cannulae Right Angled\n• Wire reinforced 900 angled plastic tip 22Fr, 24Fr and 28Fr. Overall length should be approx.38cm with 3/8 acceptance.\n item171 1 Nos
174 2.83 Retrograde Cannula catheter\n• Self-inflating smooth balloon with preshapedstylet and handle 14Fr. Overall length should be approx. 27cm & should have 18-20 mm sized smooth balloon.\n item172 1 Nos
175 2.84 Aortic Perfusion Cannulae; \n• Wire reinforced dispersion tip Sizes: 21Fr and 24Fr overall length approx.35cm and vent.\n item173 1 Nos
176 2.85 Dual Stage Venous Cannulae; \n• Wire reinforced 32/40Fr and 36/51Fr. Overall length should be approx. 40cm and ½acceptance.\n item174 1 Nos
177 2.86 Femoral Arterial Cannulae;\n• Wire reinforced overall length should be 19.5.2 cm with ¼ vented connector sizes: 8Fr, 10Fr, 12Fr and 14Fr.\n item175 1 Nos
178 2.87 Femoral Arterial Cannulae; \n• Wire reinforced overall length should be approx. 24cm with 3/8 vented connector sizes: 16Fr, 18Fr and 20Fr.\n item176 1 Nos
179 2.88 Femoral Venous Cannulae;\n• Wire reinforced overall length should be approx. 24cm with ¼ non vented connector.Sizes 8Fr, 10Fr, 12Fr and 14Fr.\n item177 1 Nos
180 2.89 Venous Femoral Cannulae; \n• Wire reinforced overall lengthshould be 752 cm with 3/8 non vented connector sizes 18Fr, 20Fr, 22Fr,24Fr and 28Fr.\n item178 1 Nos
181 2.9 Antegrade Cardioplegia Cannulae\n• 12/14/16 Fr. with vent and without vent.\n item179 1 Nos
182 2.91 Cardiotomy Venous Reservoir Adult, Paediatric, Neonatal item180 1 Nos
183 2.92 Disposable connector all sizes; Y, Straight with and without leur lock item181 1 Nos
184 2.93 Disposable Single Tubing all sizes (½,?,¼,3/16) item182 1 Nos
185 2.94 Wire enforced Arterial Cannula (6 Fr to 20 Fr) item183 1 Nos
186 2.95 Pruitt(Distal Limb arterial perfusion cannula) item184 1 Nos
187 2.96 Long, Flexible, wire-enforced cannula for ascending aortic & arch cannulation with obturator item185 1 Nos
188 2.97 Long Flexible, wire-enforced cannula for ascending aorta & arch cannulation with guide wire. item186 1 Nos
189 2.98 Long Flexible wire enforced cannula for ascending aorta and arch cannula angled with side holes. item187 1 Nos
190 2.99 Balloon tip antegrade cerebral perfusion cannula. item188 1 Nos
191 3 Group C: Valves and rings
192 3.01 Complete Bovine Aortic Pericardial Valve \n• Should be bio engineered, computer optimized to ensure uniform thickness of leaflets and have tissue deflection test to ensure uniform flexibility in all three leaflets. . Long term clinical data should be available, establishing more than at least 5 years expected durability in clinical study, long term follow up data on hemodynamic performance establishing consistency in low gradients. Should have standard low-pressure fixation &adequate treatment of tissues to preserve natural leaflet dimensionality & flexibility, while extracting phospholipids. Should have more than 20 yrs. Experience globally. Scalloped sewing ring for Aortic annulus conformity is preferable. \n• Aortic Sizes 19/21/23/25/27 \n• Should beUS FDA APPROVED \n item189 1 Nos
193 3.02 COMPLETE BOVINE MITRAL PERICARDIAL VALVE \n• Bio- engineered: Computer optimized to ensure uniform thickness, with Tissue deflection tests to ensure uniform flexibility in all three leaflets, unique design mounting feature such as flexible stent& optimal tissue stent compatibility for greater reliability. Long term clinical data available, establishing more than & consistency in hemodynamic performance. Low-pressure fixation & chemical treatment of tissue to preserve natural leaflet dimensionality & flexibility, while extracting maximum phospholipids. Should have more than 20 yrs experience globally. Should have convenient deployment and LVOT markers for ease of Implantation at Mitral position. \n• MITRAL SIZE 25/27/29/31/33 \n• Preferably FDA APPROVED \n item190 1 Nos
194 3.03 COMPLETE BOVINE MITRAL SUPRA ANNULAR PERICARDIAL TISSUE VALVE. \n• Bio mechanically engineered tissue valve with three leaflets of identical thickness, and identical Flexibility. Should be a True supra annular valvewith a saddle shaped sewing ring with posterior flexibility & anterior rigidity for optimal conformity at Mitral position, Should have LVOTO markers for correct orientation, preventing any LVOT obstruction, with convenient deployment system to prevent suture looping and ease of deployment. \n• Low profile tissue valve with asymmetrical sewing ring should preserve sub valvularapparatus and prevent LV impingement. Should have Tissue treatment to irreversibly extract both calcium binding sites Phospholipids, residual glutraldehyde, should have a flexible stent & optimal tissue stent compatibility for greater reliability. Clinical data to be available establishing long term durability and consistency in hemodynamic performance. \n• Sizes: 25 to 33mm \n• Preferably FDA APPROVED \n item191 1 Nos
195 3.04 COMPLETE BOVINE AORTIC SUPRA ANNULAR PERICARDIAL TISSUE VALVE \n• Bio-mechanically engineered tissue valve with three Leaflets of identical thickness and identical flexibility. Should be a true supra annular valve. Scallop shaped sewing ring for aortic position.Should be Low profile tissue valve. Should have Tissue treatment to irreversibly extract both calcium binding sites phospholipid, and residual glutraldehyde, should have Flexible and Durable Stent. Short term and long term clinical data should be available, establishing Durability & consistency in hemodynamic performance. Should have a sizer (barrel and replica end) for optimum sizing and placement. \n• Size 19 to 29mm \n• Preferably FDA approved \n item192 1 Nos
196 3.05 COMPLETE BOVINE PERICARDIAL LOW PROFILE AORTIC TISSUE Valve. \n• Bio-Mechanically engineered tissue valve with three leaflets of identical thickness, and Identical Flexibility. \n• Should be a true supra annular valve. \n• Should have a Scallop shaped sewing ring consistent with Aortic annulus. \n• Should have tissue treatment to Irreversibly extract both calcium binding sites phospholipid residual glutraldehyde, \n• Should have a flexible stent & optimal tissue stent compatibility for greater reliability. \n• Short and long term clinical data should be available, establishing Durability & consistency in hemodynamic perfor-mance. \n• Should have Low profile height for optimizing Coronary Ostial&sino-tubular junction clearance. Should have Three Mid commissure markers for correct orientation of the valve.\n• Should have a slick stent post & stent base allowing ease of implantation in small aortic root. \n• SIZES: 19/29mm \n• Preferably FDA APPROVED \n item193 1 Nos
197 3.06 Tricuspid Repair Ring\n• Sterile double packed tricuspid rigid ring with an anterior gap with polyester of PTFE cloth with marking for commissures.\n• Should have an oval shape and opening for AV node.\n• Sizes 26mm 28mm 30mm 32mm.\n item194 1 Nos
198 3.07 Mitral Repair Ring\n• Sterile double packed rigid ring complete or with anterior gap with polyester or PTFE cloth with marking for commissures. \n• Kidney shaped for mitral position. \n• Cover sizes 26mm, 28mm, 30mm, 32mm, and 34mm. \n item195 1 Nos
199 3.08 IMR annuloplasty ring: \n• Should have a complete rigid ring. \n• To be constructed of a strong, durable alloy. \n• Should have a increased sewing margin in the P2-P3 region, \n• Should be marked with suture and designed to accommodate a double suture row. \n• Should have a Dipped P3 region to accommodate higher stresses from downward LV displacement. \n• Should have a convenient holder/handle to increase ease of use & operative efficiency \n• Sizes 24, 26, 38, 30, 32mm \n• ?Preferably FDA APPROVED \n item196 1 Nos
200 3.09 3-D Tricuspid Annuloplasty Ring: \n• Should be a rigid annuloplasty ring with three-dimensional shape and with an incomplete ring shape to avoid the sensitive conduction system.\n• Should have a downward angle in septal region to help reduce the stress on sutures and the risk of ring dehiscence. \n• Sizes 26, 28, 30,32,34mm. \n• Preferably FDA approved.\n item197 1 Nos
201 3.1 ARTIFICIAL MECHANICAL HEART VALVE BILEAFLET/MONOLEAFLET MITRAL \n• Rotatable design, leaflets made up of pyrolytic carbon / standard durable alloy and polyester sewing cuff. \n• Should have low profile height. \n• Should have minimum vertical leaflet exposure to result in NO LVOT obstruction \n• Should have greater posterior wall clearance \n• Wide range of sizes from 23/24mm – 34/37mm \n Should Be US FDA/CE Approved.\n item198 1 Nos
202 3.11 ARTIFICIAL MECHANICAL HEART VALVE BILEAFLET/MONOLEAFLET MITRAL (for supra-annular implant)\n• Rotatable design, leaflets made up of pyrolytic carbon / standard durable alloy and polyester sewing cuff. \n• Should have low profile height. \n• Should have minimum vertical leaflet exposure to result in NO LVOT obstruction \n• Should have greater posterior wall clearance \n• Wide range of sizes from 24 mm – 34 mm \n item199 1 Nos
203 3.12 ARTIFICAL HEART VALVE BILEAFLET AORTIC \n• Rotatable design, leaflet made up of pyrolytic carbon and polyester sewing cuff, with pivot guard design. \n• Should have low profile height. \n• Should have minimum vertical leaflet exposure.\n• Wide range of sizes from 19mm-31mm.\n• Should be CE / FDA approved \n item200 1 Nos
204 3.13 ARTIFICAL HEART VALVE BILEAFLET AORTIC for Supra-annular implant\n• Rotatable design, leaflet made up of pyrolytic carbon and polyester sewing cuff, with pivot guard design. \n• Should have low profile height. \n• Should have minimum vertical leaflet exposure. \n• Wide range of sizes from 16 mm- 28mm.\n• Should be CE / FDA approved \n item201 1 Nos
205 3.14 ARTIFICAL HEART VALVE BILEAFLET AORTIC (for Supra-annular –intra-annular implant)\n• Rotatable design, leaflet made up of pyrolytic carbon and polyester sewing cuff, with pivot guard design. \n• Should have low profile height. \n• Should have minimum vertical leaflet exposure. \n• Wide range of sizes from 17mm- 25mm.\n• Should be CE /FDA approved\n item202 1 Nos
206 3.15 BILEAFLET AORTIC VALVE WITH CONDUIT \n• Should have double velour woven graft. \n• Should be collagen impregnated to control hemostasis and reduce the hemorrhagic complications. \n• Should have mechanical heart valve with low-pressure gradients. With pivot guard design and leaflet opening and >75 degrees.\n• Cuff design should enhance implantability. \n• Should have minimum taper conduit to facilitate strong coronary anastomosis. \n• Should not have any pleats to allow easier positioning and attachment of the coronary arteries. \n• Wide range of sizes from 19mm- 33mm. \n• Preferably have CE / FDA approval.\n item203 1 Nos
207 3.16 PORCINE TISSUE HEART VALVE MITRAL / AORTIC\n• Should have stented, triple composite design with separate porcine leaflets to optimize leaflets cooptation and reduce stress.\n• Should have anti-calcification treatment to reduce calcification. \n• Low profile height.\n• In aortic position should be available in sizes 19mm-31mm. \n• In mitral position should be available in sizes 25mm to 33mm. \n• Preferably CE / FDA approval. \n item204 1 Nos
208 3.17 PERICARDIAL EXTERNALLY MOUNTED TISSUE HEART VALVE(AORTIC) \n• Should have stented, pericardial single layered leaflet externally mounted to optimize hemodynamics. Should have tissue to tissue interface adding to durability. \n• Should have anti calcification treatment to reduce calcification. \n• Supra annular design.\n• In aortic position should be available in sizes 19mm-29mm. \n• Preferably CE / FDA approval. \n item205 1 Nos
209 3.18 ANNULOPLASTY RINGS MITRAL \n• Titanium alloy core with polyester woven cloth.\n• 3 D motion. \n• Should have both CE and FDA approval.\n• Wide range of sizes 24mm- 34mm. \n item206 1 Nos
210 3.19 ANNULOPLASTY RING FLEXIBLE \n• Fully flexible ring/band. \n• Should have X-ray visibility.\n• Should have both CE and FDA approval. \n• Wide range of sizes - 25mm-35mm \n item207 1 Nos
211 3.2 Rigid remodeling ring for mitral valve repair\n• Size 24mm, 26mm, 28mm, 30mm, 32mm, 34mm, 38mm,40mm\n• Should be fully rigid remodeling ring. \n• Should have physiologic mitral valve shape.\n• 25% annular height to commissural width ratio anterior, 15% annular height to commissural width ratio posterior. \n• Should have saddle shape and polyester knit covering with Titanium/ silicone core. \n item208 1 Nos
212 3.21 Annuloplasty ring for tricuspid valve repair\n• Low profile Ring, \n• Sizes 26mm, 28mm, 32mm, 34mm,36mm\n• Should be incomplete ring to avoid interference in conduction system, height should be less than 3.5mm. \n• Should have titanium core encapsulated with silicone and covered with polyesterfabric. \n• Septal lateral compression. \n item209 1 Nos
213 3.22 Composite Annuloplasty ring for Mitral repair \n• Sizes 24mm, 26mm, 28mm,30mm,32mm,34mm,36mm,38mm\n• Should have semi rigid posterior remodeling with anterior flexibility, \n• should have polyester knit covering with MP-35N/ silicone core \n item210 1 Nos
214 4 Group D: Vascular grafts and patches
215 4.01 Dacron straight woven Grafts 6mm to 16 mm, 30-35 cm long, Collagen coated. item211 1 Nos
216 4.02 Dacron straight woven Grafts 18mm to 28 mm, 30-35 cm long,Collagen coated. item212 1 Nos
217 4.03 Dacron straight woven Grafts 30mm to 38 mm, 30-35 cm long,Collagen coated. item213 1 Nos
218 4.04 Dacron straight woven Grafts 6mm to 16 mm, 60-70 cm long,Collagen coated. item214 1 Nos
219 4.05 Dacron straight woven Grafts 18mm to 28 mm, 60-70 cm long,Collagen coated. item215 1 Nos
220 4.06 Dacron straight woven Grafts 30mm to 38 mm, 60 cm-70 long,Collagen coated. item216 1 Nos
221 4.07 Dacron bifurcated woven grafts 12mmX6 mm, 14mmX7mm, 16mmX8mm,. 18mm X9mm with 40-50 cmslength,Collagen coated. item217 1 Nos
222 4.08 Knitted Dacron straight graft 6mm to 16 mm with 30-35 cm length,Collagen coated. item218 1 Nos
223 4.09 Knitted Dacron straight graft 18mm to 24 mm with 30-35 cm length,Collagen coated. item219 1 Nos
224 4.1 Knitted Dacron straight graft 6mm to 16 mm with 60-70 cm length,Collagen coated. item220 1 Nos
225 4.11 Knitted Dacron straight graft 18mm to 24 mm with 60-70 cm length,Collagen coated. item221 1 Nos
226 4.12 Dacron bifurcated knitted grafts 12mmX6 mm, 14mmX7mm, 16mmX 8mm,. 18mm X 9mm with 40-50 cms length item222 1 Nos
227 4.13 Dacron Woven 3 branch arch grafts 20mm to 34 mm,Collagen coated. item223 1 Nos
228 4.14 Dacron Woven 4 branch arch grafts 20mm to 34 mm,Collagen coated. item224 1 Nos
229 4.15 Dacron Woven Thoraco-abdominal grafts 20mm to 30mm, Collagen coated. item225 1 Nos
230 4.16 Dacron Woven graft 20 to 34mm with 8mm and 10 mm perfusion side branch, 40-50 cm length, Collagen coated. item226 1 Nos
231 4.17 Dacron Woven extra length graft with offset branch graft 22 to 32 mm with 8mm perfusion side branch, Collagen coated. item227 1 Nos
232 4.18 Dacron Woven pre-curved graft 22 mm to 32 mm with 8mm perfusion side branch, Collagen coated. item228 1 Nos
233 4.19 Woven Trifurcate 12mm X 6mm X 6mm, 14 mm X 7mm X 7mm, 16mm X 8mm X 8mm, 40-50 cm in length,Collagen coated. item229 1 Nos
234 4.2 Dacron Knitted axillo-bifemoral bifurcated graft with extended support, Collagen coated. item230 1 Nos
235 4.21 Dacron Knitted Axillo-bifemoral graft 90 degrees angle with 60 cm side branch 8mm and 10 mm,Collagen coated. item231 1 Nos
236 4.22 Dacron Knitted Femoral-Femoral grafts 6mm and 8 mm 30cm and 40 cm long,Collagen coated. item232 1 Nos
237 4.23 Dacron Knitted straight Peel able support 6mm, 8mm and 10 mm, Collagen coated. item233 1 Nos
238 4.24 Dacron straight woven Grafts 6mm to 16 mm, 30-35 cm long , Gelatin coated. item234 1 Nos
239 4.25 Dacron straight woven Grafts 18mm to 28 mm, 30-35 cm long, Gelatin coated. item235 1 Nos
240 4.26 Dacron straight woven Grafts 30mm to 38 mm, 30-35 cm long, Gelatin coated. item236 1 Nos
241 4.27 Dacron straight woven Grafts 6mm to 16 mm, 60-70 cm long, Gelatin coated. item237 1 Nos
242 4.28 Dacron straight woven Grafts 18mm to 28 mm, 60-70 cm long, Gelatin coated. item238 1 Nos
243 4.29 Dacron straight woven Grafts 30mm to 38 mm, 60 cm-70 long, Gelatin coated. item239 1 Nos
244 4.3 Dacron bifurcated woven grafts 12mmX6 mm, 14mmX7mm, 16mmX 8mm,. 18mm X9mm with 40-50 cms length, Gelatin coated. item240 1 Nos
245 4.31 Knitted Dacron straight graft 6mm to 16 mm with 30-35 cm length, Gelatin coated. item241 1 Nos
246 4.32 Knitted Dacron straight graft 18mm to 24 mm with 30-35 cm length, Gelatin coated. item242 1 Nos
247 4.33 Knitted Dacron straight graft 6mm to 16 mm with 60-70 cm length, Gelatin coated. item243 1 Nos
248 4.34 Knitted Dacron straight graft 18mm to 24 mm with 60-70 cm length, Gelatin coated. item244 1 Nos
249 4.35 Dacron bifurcated knitted grafts 12mmX6 mm, 14mm X 7mm, 16mmX 8mm,.18mm X 9mm with 40-50 cms length, Gelatin coated. item245 1 Nos
250 4.36 Dacron Woven 3 branch arch grafts 20mm to 34 mm, Gelatin coated. item246 1 Nos
251 4.37 Dacron Woven 4 branch arch grafts 20mm to 34 mm, Gelatin coated. item247 1 Nos
252 4.38 Dacron Woven Thoraco abdominal grafts 20mm to 30mm, Gelatin coated. item248 1 Nos
253 4.39 Dacron Woven graft 20 to 34mm with 8mm and 10 mm perfusion side branch, 40-50 cm length, Gelatin coated. item249 1 Nos
254 4.4 Dacron Woven extra length graft with offset branch graft 22 to 32 mm with 8mm perfusion side branch, Gelatin coated. item250 1 Nos
255 4.41 Dacron Woven pre-curved graft 22 mm to 32 mm with 8mm perfusion side branch, Gelatin coated. item251 1 Nos
256 4.42 Woven Trifurcate 12mm X 6mm X 6mm, 14 mm X 7mm X 7mm, 16mm X 8mm X 8mm, 40-50 cm in length, Gelatin coated. item252 1 Nos
257 4.43 Dacron Knitted axillo-bifemoral bifurcated graft with extended support, Gelatin coated. item253 1 Nos
258 4.44 Dacron Knitted Axillo-bifemoral graft 90 degrees angle with 60 cm side branch 8mm and 0 mm, Gelatin coated. item254 1 Nos
259 4.45 DACRON MARKING PATCH (Filamentous Fabric)\n• Should be Nominal Thickness; around 0.6 mm\n• Water permeability; approximately 1800ml\n• Popularly known as ”MARKING PATCH”\n• Markings arrow should indicate, in which direction the patch is to be stitched.\n• Sizes 2” x 2”, 4 x4” and 6x6 ‘ inches\n item255 1 Nos
260 4.46 Double Velour Fabric;\n• Should have Nominal Thickness; 1.4-1.6mm. \n• With Water permeability of approximately 3800 ml.\n• Should have No Reference markings. \n• Used for Repair of Intracardiac defects and for VSD repair in Adults. \n• SIZES: - 4”X4” & 6”X6”\n item256 1 Nos
261 4.47 Outflow Tract Fabric\n• PTFE.\n• Should have Nominal Thickness: around 0.9mm. with Water Permeability: 250ml.\n• Used for Aortic repair, Pulmonary Outflow tracks patching & other Intracardiac Defects.\n• SIZES: - 4X4 & 6”X6”\n item257 1 Nos
262 4.48 Thin Wall Patch of PTFE\n• Should have multidirectional node fiber structure, to accommodate cellular in growth & give uniform strength throughout the patch Surface.\n• Should be soft & pliable for easy surgical positioning. \n• No Pre clotting should be required.\n• Should have excellent biocompatibility for cardiac& vascular repairs and peripheral vascular reconstruction.\n• Should have Thicknessaround 0.4mm suitable for Aortic & Vascular repair\n• SIZES:- 1CM X 9CM, 2X9CM & 3CMX6CM (OVAL SHAPED)\n item258 1 Nos
263 4.49 Regular Wall Patch of PTFE\n• Should have multidirectional node fiber structure to accommodate cellular in-growth.\n• Should be soft & pliable for easy surgical positioning. \n• No Pre clotting should be required.\n• Should have excellent biocompatibility for cardiac& vascular repairs and peripheral vascular reconstruction.\n• Thickness – 0.6mm\n• SIZES:- 3CM X 3CM,5CMX7.5CM,2.5CMX15CM & 10CMX15CM (RECTANGULAR)\n item259 1 Nos
264 4.5 Low Porosity FELTS of PTFE;\n• Should have Thickness 1.5 to 1.8mm. \n• Should have Low Porosity to control bleeding and for buttress for sutures.\n• SIZES:-2' X 2", 4”X4’ & 6”X6’\n item260 1 Nos
265 4.51 PTFE Normal felt;\n• Should have Thickness 1.5 to 1.8mm. \n• To be used as a buttress for sutures and Friable tissue\n• SIZES:- 2”x2 ,4”x4 & 6”x6\n item261 1 Nos
266 4.52 PTFE Hard (Thick) FELTS:-\n• Should have Thickness around 3 mm to provide added support to tissue.\n• SIZES:- 4”X4” & 6”X6”\n item262 1 Nos
267 4.53 PTFE FELTS PLEDGETS \n• Shape:-Rectangle, Square Oval &Round. Should have Thickness around 1.6mm\n• Sizes:- 4.8mm x 6.0mm (Rectangle), 9.5mm x 4.8mm (Rectangle), 6.0x6.0mm (Square) & 4.8mm x 6.0mm (Oval)\n item263 1 Nos
268 4.54 Regular & Thin wall e-PTFE graft all sizes and length item264 1 Nos
269 4.55 Regular & Small Beadings (Rings) PTFE graft all sizes and length. item265 1 Nos
270 4.56 BT Shunt PTFEgrafts all sizes and length item266 1 Nos
271 4.57 Large Diameters e PTFE Grafts all sizes and length item267 1 Nos
272 4.58 e-PTFE Stretch Large Diameter Reinforced Aortic Vascular Graft of all diameters and length item268 1 Nos
273 4.59 e-PTFE Cardiovascular Patch\n• Sizes:- 5cm x 15cm x 0.6mm x10cm x 15cm x 0.6mm, 3cmx 6cm x 0.4mm\n item269 1 Nos
274 4.6 e-PTFE Pericardial Membrane 0.1mm thick\n• Size 6cm x 12cm/12cmx12cm/15cm x 20cm\n item270 1 Nos
275 4.61 e-PTFE Stretch Reinforced Thin Wall Heparin Bonded Vascular Graft \n10cms length Size: 3mm / 3.5mm / 4mm / 5mm / 6mm diameter\n item271 1 Nos
276 4.62 e PTFE Stretch Reinforced Thin wall Non Ringed Heparin Bonded Vascular Graft 40/80cms length Size: 6/7/8/mm diameter. item272 1 Nos
277 4.63 e- PTFE Stretch Reinforced Removable Ringed Thin Wall Heparin Bonded Vascular Graft 50/70/80cm length size: 6/7/8mm diameter item273 1 Nos
278 4.64 e-PTFE Stretch Reinforced Thin Wall limbed Bifurcated Vascular Graft Size : 2/6x50cm; 14/7 x 40cm / 50cm; 16/8x50cm; 18 / 9 x50cm; 20 / 10 x 50cm; 22/12 x40cm; 24/12x40cm item274 1 Nos
279 4.65 e PTFE Suture :Size CVO/CV2/CV3/CV4/CV5/CV6/CV7/CV8 item275 1 Nos
280 4.66 e-PTFE Stretch re-in forced removable ringed thin wall pre configured axillo bi femoral vascular graft.\nSize: \ni) 8mm diameter x 70cm/40cm length\nii) 8mm diameter x 90cm/40cm length\n item276 1 Nos
281 4.67 e PTFE stretch re- in forced low profile integrated radially supported thin wall vascular graft. Size 6mm/ 7mm / 8mm diameter 40cm / 60cm / 80cm length item277 1 Nos
282 4.68 e PTFE stretch re-in forced removable ringed thin wall vascular graft. Size: 6mm/8mm diameter x 50cm/70cm/80cm length. item278 1 Nos
283 4.69 Ascending aortic reconstruction graft \n• One piece design collagen coated VALSALVA graft for repair or reconstruction of the ascending aorta.\n• Should mimic the anatomy and blood flow dynamics of the natural sinuses of Valsalva\n• Unique un-crimped section that does not stretch should allow easy sewing of valve remnants or prosthetic valve\n• Should facilitate estimation of the length required for optimal placement of valve remnants or prosthetic valve to ensure optimal clinical outcomes.\n• Should have the ability to be precisely trimmed and shaped in case of remodeling technique procedures.\n• At least 3 References line should act as a guide for prosthetic valve.\n• Coated polyester fabric Cross linked Type I bovine collagen\n• Water permeability < 5m * cm -2 min-1 @ 120mmHg\n item279 1 Nos
284 5 Group E: Miscellaneous items
285 5.01 I.V. Set with flow controller (DEHP Free): \n• Specially designed I.V. set for controlling the flow rate of fluid made of medical grade DEHP free polymer nonreactive to water-soluble materials.\n• Gravity drive infusion set with wide dial, which operates as thumb wheel like roller clamp.\n• Security door to prevent the accidental change of flow rate. \n• Low cost disposable set.\n• Sterile, individually packed in blister pack.\n item280 1 Nos
286 5.02 Snugger Set – All sizes: Three pairs of smooth snuggers with Yellow, Blue & Pink colors for vessel identification.Each snare set consists of thumb holder handle for easy maneuverability. Specially designed for putting purse string sutures, made of medical grade PVC. Sizes Adult &Pediatric. item281 1 Nos
287 5.03 Disposable Suction Tube & Tip: Medical grade PVCmolded handles with kink resistant tube for per operative suctioning. Tip of Handle should be crown/ standard shape. Vent port to be provided in handle which should be closed with tight sleeve. Soft flexible adaptors at both end of the tube for connection with secure fitment between suction source& handle. Tube Length 2500 mm, OD: 9 mm, ID: 6 mm. Sterile packed in poly pouch pack. item282 1 Nos
288 5.04 Thoracic catheter – All Sizes: Extra soft thoracic drainage catheter, made of DEHP free medical grade polymer, gentle to body tissues & most suitable for thoracic drainage. Catheters are marked at every 2cm from the last eye. Sterile, double (straight) packed in peel able pouch pack. Sizes required: Sizes: 16, 20, 24, 28, 32, 36, 40 FG item283 1 Nos
289 5.05 Thoracic catheter Right Angled (90o) – All Sizes: Extra softangledthoracic drainage catheter, made of DEHP free medical grade polymer, gentle to body tissues & most suitable for thoracic drainage. Catheters are marked at every 2cm from the last eye. Sterile, double packed in peelable pouch pack. Sizes: 16, 20, 24, 28, 32, 36, 40 FG item284 1 Nos
290 5.06 Thoracic catheter with trocar – All Sizes: Thoracic drainage catheter with trocar for thoracic drainage purpose. Catheters to be marked at every 5, 10, 15 & 20 cm from the last eye. Fitted with tapered connector. Sterile, packed in peelable pouch pack. Sizes: 12, 16, 20, 24, 28, 32, 36 FG item285 1 Nos
291 5.07 Thoracic catheter with trocar – All Sizes: Thoracic drainage catheter with trocar for thoracic drainage purpose. Catheters to be marked at every 5, 10, 15 & 20 cm from the last eye. Fitted with tapered connector. Sterile, packed in peelable pouch pack. Sizes: 12, 16, 20, 24, 28, 32, 36 FG item286 1 Nos
292 5.08 Chest Drainage Bottle – 2000 ml: Under water seal drainage system.Double chamber compact unit with 2000 ml capacity.Easy to read graduation on bottle to determine the drainage volume precisely. Clearly marked initial level to ensure the underwater seal. Separate suction port for connection with suction unit. Should have valve to prevent excess suction. Kink resistant large bore tubing to facilitate unrestricted flow. Unit to be provided with metal hangers and floor stand. Sterile, packed in peelable pouch pack. item287 1 Nos
293 5.09 Chest Drainage Bottle – 1200 ml: Under water seal drainage system. Single chamber compact unit with 1200 ml capacity. Easy to read graduation on bottle to determine the drainage volume precisely.Should have valve to prevent excess suction. Clearly marked initial level to ensure the underwater seal. Specially designed positive pressure relief valve. Separate suction port for connection with suction unit. Kink resistant large bore tubing to facilitate unrestricted flow. Unit to be provided with metal hanger/ floor stand. Sterile, packed in peelable pouch pack. item288 1 Nos
294 5.1 Chest Drainage Bottle – 500 ml: Under water seal drainage system. Single chamber compact unit with 500 ml capacity. Easy to read graduation on bottle to determine the drainage volume precisely. Clearly marked initial level to ensure the underwater seal. Separate suction port for connection with suction unit. Kink resistant large bore tubing to facilitate unrestricted flow. Should have valve to prevent excess suction. Unit to be provided with metal hanger/ floor stand. Sterile, packed in peelable pouch pack item289 1 Nos
295 5.11 Skin Marker Pen: Skin marker for surgery preparation.\n• Manufactured from bactericidal, antifungal Gentian Violet.\n• Violet color ensures easy visibility. Sterile, individually packed in a peel open pack.\n• Surgical Skin marker pen with standard size tip.\n item290 1 Nos
296 5.12 FOGARTY ARTERIAL EMBLECTOMY CATHETER\n• Vinyl Latex Balloon tipped catheter for Arterial Emblectomy procedure. \n• Usable length 60-80 cm, Size 2F to 8F. \n• Recessed winding technique for balloon attachment for maintaining balloon symmetry for uniform contact with vessel wall, providing consistent clot removal \n item291 1 Nos
297 5.13 THRU LUMEN FOGARTY CATHETER\n• Vinyl Latex Balloon tipped catheter for Arterial Embolectomy procedure. \n• Usable length 80 cm. \n• Size 2F-8F. \n• Second lumen for guide wire compatibility facilitating crossing occluded, tortuous &stenotic arterial wall OR to be used for drug delivery & blood sampling. \n• Stainless steel bushes under proximal & distal balloon windings for visualization under fluoroscopy. \n• Recessed winding technique for balloon attachment for maintaining balloon symmetry for uniform contact with vessel wall, providing consistent clot removal.\n item292 1 Nos
298 5.14 ELECTRO CAUTERY RETURN PLATE WITH CORD\n• All sizes should be available\n• Disposable Sticky patient return split monitoring style.\n• Pre attached cable (US FDA approved)\n item293 1 Nos
299 5.15 ELECTRO CAUTERY RETURN PLATE WITHOUT CORD\n• All sizes should be available\n• Disp. Sticky patient return split monitoring style.\n• Cord should be provided separately.\n• US FDA approved\n item294 1 Nos
300 5.16 Disposable surgical drape:\n• Made up of reinforced spun-bond film composite material, blue laminate of polypropylene non-woven fibers and polyethylene film.\n• Highly absorbent yet impervious across entire drape.\n• Low-linting, non-breathable, abrasion resistant, durable, strong tear resistant, conformable, with self adhesive containing hypoallergenic acrylate type adhesive with a silicone coated paper liner. \n• ETO Sterilized.\n• CABG Pack:4 Self adhesive cautery bags (30cmx35cm),3 Op tapes(10cmx55cm),4 Lint free hand towels (23.5cmx38cm),4 Self adhesive towel drapes (91.5cmx100cm),1 Self Adhesive Medium drape (183cmx183cm),1 Self Adhesive Large drape(150cmx250cm),1 Instrument table drape (150cmx200cm),1 Large Instrument table drape (183cmx240cm),1 Self Adhesive Bilateral Split drape (183cmx200cm),2 Triangular drape (91.5cm x 91.5cm x 129cm).\n item295 1 Nos
301 5.17 CAUTREY LEAD\n• Disposable. \n• Hand control button switch with PTFE coated blade electrode.\n• Should be light weight\n• US FDA approved\n• Should be compatible with all standard brands of cautery machines.\n item296 1 Nos
302 5.18 TITANIUM LIGATING CLIPS “SIZE – SMALL”\n• Wire of the clip should be ‘ Heart shaped for a firm grip on Vessels\n• Clips should be of ‘Chevron’ shape for better closure\n• Cartridge should have adhesive backing for better control while loading.\n• Clips should be easy to lad with soft loading technique.\n• Clip cartridges should be color coded for better identification.\n• Clips quoted should be registered in India for selling. \n• Should have all required documentations like from 10 A and Form 41 etc.\n• Should be US FDA approved with clinic data backing for the same. \n item297 1 Nos
303 5.19 TITANIUM LIGATING CLIP “ SIZE MEDIUM”\n• Wire of the clip should be ‘Heart shaped’ for a firm grip on vessels\n• Clips should be of ‘Chevron’ shape for better closure.\n• Cartridge should have adhesive backing for better control while loading.\n• Clips should be easy to load with soft loading technique.\n• Clip cartridges should be color coded for better identification.\n• Clips quoted should be registered in India for selling. Should have all required documentations like from 10A and form 41 etc.\n• Should be US FDA approved with clinic data backing for the same.\n item298 1 Nos
304 5.2 TITANIUM LIGATING CLIPS”SIZE-MEDIUM LARGE”\n• Wire of the clip should be ‘Heart shaped’ for a firm grip on vessels.\n• Clips should be of “Chevron’ shape for better closure.\n• Cartridge should have adhesive backing for better control while loading.\n• Clips should be easy to load with soft loading technique.\n• Clip cartridges should be color-coded for better identification.\n• Clips quoted should be registered in India for selling. Should have all required documentation like form 10A and form 41 etc.\n• Should be US FDA approved with clinic data backing for the same.\n item299 1 Nos
305 5.21 TITANIUM LIGATING CLIPS” SIZE-LARGE\n• Wire of the clip should be ‘Heart shaped for a firm grip on Vessels. \n• Clips should be of ‘Chevron’ Shape for better closure\n• Cartridge should have adhesive backing for better control while loading.\n• Clips should be easy to load with soft loading technique.\n• Clip cartridges should be color-coded for better identification.\n• Clip quoted should be registered in India for selling. Should have all required documentation like from 10A and form 41 etc.\n• Should be US FDA approved with clinic data backing for the same. \n item300 1 Nos
306 5.22 APPLICATOR FOR TITANIUM CLIPS (Small, Medium, Large)\n• ?Should be available in three shapes :CURVED, ANGLED & RIGHT ANGLED \n• Device to be compatible for titanium clips listed in the tender.\n item301 1 Nos
307 5.23 Aortic punch Long handle:\n• Size: 2.5cm to 6cm\n• Should have sharp dual cutting edge for clean, precise removal of aortic tissue. \n• A conical tip should be there for easy insertion by straight or button hole technique. \n• Ten blade sizes for trimming to desired size and shape 2.5mm – 6.0mm.\n item302 1 Nos
308 5.24 Pediatric bronchial blocker – \n• Should have a catheter with a bifurcated distal end resembling the bifurcation of the trachea. During insertion through a standard endotracheal tube, both distal ends easily find their way into the two main stem bronchi. Under bronchoscopic vision the lung can be isolated by inflating the balloon. The inflated balloon will always be located at the entrance of the main bronchus. The EZ-Blocker should not dislocate after inflation of the isolated lung. If renewed isolation is required the balloon can be re-inflated without the need to reposition the balloon. Size -7mm.\n item303 1 Nos
309 5.25 DISPOSABLE CAMERA SLEEVE;\n• Transparent, plastic disposable, sterile camera sleeves, for use during MICS, robotis, for epicardial echo.\n• Circular diameter-6inches .\n• Lengthmore than 1meter.\n item304 1 Nos
310 5.26 Specifications for tyvek roll\n• Tyvek sheet in rolls, backed with a strong plastic top layer suitable for both Ethylene oxide and plasma sterilization.\n• Should be compatible with all standard brands of plasma and steam sterilization systems\n• Should have STERILISATION PROCESS indicator to confirm effective sterilization\n• Sizes required\n? 50cm x 70mtrs\n? 7.5cm x 70mtrs\n? 10cm x 70mtrs\n? 15cm x 70 mtrs\n? 17.5cm x 70 mtrs\n? 20cm x 70 mtrs\n? 25cm x 70 mtrs\n? 30cm x 70 mtrs\n? 35cm x 70 mtrs\n? 40cm x 70mtrs\n? 45cm x 70mtrs\n? 50cm x 70mtrs\n? 60cm x 70mtrs\n item305 1 Nos
311 5.27 SURGICAL BRUSH with IODINE POVIDONE AND CHLOROHEXIDINE\n• Should be sponge impregnated 12% povidone-iodine in a 15ml solution of Teepol, P.E.G and water supplied with nail cleaner.\n• Should be sponge impregnated 20% chlorohexidine-iodine in a 15ml solution of ISO PROPYLE Alcohol and water supplied with nail cleaner.\n• Should be US FDA APPROVED\n item306 1 Nos
312 5.28 Vacuum Drainage Sets: \n• Device for close wound drainage under negative pressure post operatively with option to use one or two catheters.\n• Drain catheters should be provided with radio opaque line and smooth eyes. \n• Connecting tube should be kink resistant and should be provided with additional strength to withstand the suction. \n• Chamber should be easy to depress so as to activate the suction of bellow unit. \n• Should be available with different catheter. \n• Should be sterile and individually packed.\n• Sizes of 10, 12, 14, 16, 18 FG.\n item307 1 Nos
313 5.29 ADHESIVE TRANSPARENT DRAPE (SURGICAL SITE FILM) ALL SIZES\n• Should be equivalent to Dermincise.\n• Should be self-adhesive sterile drape for surgery and wound dressing incise drape.\n• Should be available in assorted sizes.\n item308 1 Nos
314 5.3 Bedsores prevention air mattress with pump: Air mattress for prevention and treatment of bedsores stage.\n• Should be low air loss and alternating pressure mattress. \n• Should have unique strip type design, which can change shape with the elevation of bed of the patient.\n• Should prevent bed sores/ accelerate healing of existing bedsores. \n• Should keep the interface pressure against patient’s skin at a level below capillary occlusion. \n• The pump should operate at very low sound level. \n• Pump should have provision to hang to the end of the bed by means of 2 hooks. \n• Mattress should resist a temperature of -30 degree Celsius and should support weight of 110kg. \n• Dimensions should be approx.180 x 80 x 7.5 cms. \n• Should be individually packed.\n• Kit should consist of mattress, motor & spare cell.\n item309 1 Nos
315 5.31 Respiratory muscle exerciser(Inspiratory muscle trainer device)\n• Should incorporate a flow-independent, one-way valve to ensure consistent resistance,\n• Should feature an adjustable specific pressure setting to be set at a particular time. \n• It should work via inhalation to exercise the respiratory muscles.\n• It should have flow independent one-way valve, which should work at constant pressure regardless of patient's airflow. \n• It should be easy to set at adjustable pressure, whichcan be used/held in any position. \n• It should be easy to clean & should have the capacity to be used with mouthpiece. \n• It should be individually packed in poly bag.\n item310 1 Nos
316 5.32 Absorbable haemostatic gelatin sponge–\n• Should be sterile absorbable hemostatic gelatin sponge with uniform porosity. \n• Should be non irritating and non toxic. \n• Should be Gamma/ Heat sterilized. \n• Should be packed in a double blister pack. \n• Dimensions: Approximately 8 x 5x 1 cm.\n item311 1 Nos
317 5.33 Reusable Gel Pack: Reusable Gel packs for pain management.\n• It should be able to be kept in freezer for cold therapy. \n• It should be able to be microwaved (for appx. 2mintues) / kept in boiling water to provide hot fomentation. \n• Gel packs must be of a superior quality and non-toxic filling should be safe and hold temperatures for longer duration. \n• Should be durable, burst & puncture resistant.\n• Should have been designed to ensure even spread of gel inside the pack.\n• Two sizes: Large: 15 x 30cm (6” x 12”) & Medium: 10 X 25 cm (4” x 10”).\n item312 1 Nos
318 5.34 Carotid Shunts :\n• Should have A Wide selection for Carotid Endartrectomy procedures. SHUNTS should be available in various sizes and lengths, including Straight, Tapered and “T” Design to add versatility in use.\n item313 1 Nos
319 5.35 DISP. BULL DOG CLAMPS ALL SIZES\n• Disposable’ bull dog’ clamps for temporary occlusion of vascular structures.\n• Atraumatic \n• Made with standard quality plastic.\n• Should be ETO sterlisable for repeated use.\n item314 1 Nos
320 5.36 GAUZE PADS\n \n• Gamma Sterilized 100% cotton + Gauze Combine Dressing \nSize-10cm x 10cm, 10cm x 20cm\n \n i. Gauze Overwrap (of the combined Dressings)- Leno weave Abs. Gauze Cloth\n \nThread Count: 21’s x 21’s, Construction of cloth per 2.5cm: 20 x 20\n \nAverage Cut size of leno Gauze Cloth Used For Overwrap\n10cm x 28cm: Wt: 44.5g/Sq.m, 20cm x 28cm Wt: 44.5g/Sq.m\n \nAbsobency: Below 10 Seconds, Fliorescence: Nil\n \nii. ABS. Cotton Wool I.P Used: \n \nAV. Layer Thickness of Pad: 8-10mm, Av. Cut Sizes I. 10cm x 10cm, II. 10cm x 20cm\nAbsorbency: Below 10 seconds, Fliorescence: Nil\n \n iii. Final Product:\nGauze Cotton Pad B.P. 10cm x 10cm & 10cm x 20cm\n iv. Gamma Rays Sterilization: Product irradiated with gamma Rays.\n item315 1 Nos
321 5.37 GAUZE SWAB\n \n• Gamma Sterilized 100% cotton Gauze Swabs\nSize-10cm x 10cm x 12Ply, 10cm x 08cm x 12Ply, 08cm x 06cm x 12Ply\n \ni. Cotton Gauze Cloth: Clean, hygine, neutral in ultraviolet rays, ph value 7, with X-Ray detectable threads.\n ii. Construction of Cloth: \nThread Count: 30’s x 30’s\n Wrap 46 per Dm (+-4)\n Weft 40 per Dm (+-4)\n ( As per FII Schedule)\n Absorbency: Below 10 seconds\n Fluorescence: NIL\nForeign Matter: 0.3% by weight\nWeight: 26.5g/sg.m\n iii. Cotton Gauze Cloth of Size: 40cm x 30cm, 32cm x 30cm, 32cm x 18cm\n \nFolded with cut edges in size into the final product sizes. Size-10cm x 10cm x 12Ply, 10cm x 08cm x 12Ply, 08cm x 06cm x 12Ply\niv. Gamma Sterilization:\nEach Gauze swab should be in fully packed condition to be sent for sterilization by Gamma Rays from where batch wise sterilization certificate are provided.\n \nv. Packing ( For All Size)\n1. One pouch with 1 Swab, 20 Pouches in a box\n2. One Pouch with 3 Swab, 10 such pouches in a box.\n3. One Pouch with 5 Swabs, 6 Such Pouches in a box.\n item316 1 Nos
322 6 Cardiac Sutures as per below specifications
323 6.01 5-Chloro-2 – (2,4 – Dichlorophenoxy) Phenol coated Polyglactin 910 suture of 90 CM ,1/2 Circle Round Body,30 MM,Size-2-0,Pack of 12 Foils item317 1 Nos
324 6.02 5-Chloro-2 – (2,4 – Dichlorophenoxy) Phenol coated Polyglactin 910 suture of 90 CM ,1/2 Circle Round Body,40 MM,Size-1-0,Pack of 12 Foils item318 1 Nos
325 6.03 5-Chloro-2 – (2,4 – Dichlorophenoxy) Phenol coated Polyglactin 910 suture of90 CM ,1/2 Circle Round Body (Heavy),40 MM,Size-1,Pack of 12 Foils item319 1 Nos
326 6.04 5-Chloro-2 – (2,4 – Dichlorophenoxy) Phenol coated Polyglactin 910 suture of 90 CM ,1/2 Circle Reverse Cutting,40 MM,Size-2-0,Pack of 12 Foils item320 1 Nos
327 6.05 Polyamide Black Monofilament 70 CM ,3/8 Circle Reverse Cutting,45 MM,Size-2-0,Pack of 12 Foils item321 1 Nos
328 6.06 Black Braided silk of 90 CM ,3/8 Circle Cutting needle,16 MM,Size-3-0,Pack of 12 Foils item322 1 Nos
329 6.07 Black Braided silk of 76 CM ,3/8 Circle Reverse Cutting needle ,45 MM,Size-2-0,Pack of 12 Foils item323 1 Nos
330 6.08 Black Braided silk of 90 CM ,1/2 Circle Round Body needle 25 MM,Size-3-0,Pack of 12 Foils item324 1 Nos
331 6.09 Black Braided silk 90 CM ,1/2 Circle Round Body,30 MM,Size-2-0,Pack of 12 Foils item325 1 Nos
332 6.1 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body,25 MM,Size-3-0, Pack of 12 Foils item326 1 Nos
333 6.11 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,25 MM,Size-3-0,Pack of 12 Foils item327 1 Nos
334 6.12 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Tapercut Double Needle,17 MM,Size-4-0,Pack of 12 Foils item328 1 Nos
335 6.13 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,16 MM,Size-5-0,Pack of 12 Foils item329 1 Nos
336 6.14 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round Body (282 Microns) Double Needle,10 MM,Size-6-0,Pack of 12 Foils item330 1 Nos
337 6.15 POLYPROPYLENE 60 CM , Taper Point Curved Round Body Double Needle,8 MM,Size-7-0,Pack of 12 Foils item331 1 Nos
338 6.16 Reel 25 MTR 6 Spools in a box , Black Braided Silk,Size-3-0,Pack of 6 Foils item332 1 Nos
339 6.17 Reel 25 MTR 6 Spools in a box , Black Braided Silk,Size-2-0,Pack of 6 Foils item333 1 Nos
340 6.18 Reel 25 MTR 6 Spools in a box , Black Braided Silk,Size-1-0,Pack of 6 Foils item334 1 Nos
341 6.19 Polyethylene tere pthalate Braided Green 5x75 CM White 5x75 CM with Firm PTFE Pledgets 6mmx3mmx1.5mm ,1/2 Circle Tapercut SX Double Needle,17 MM,Size-2-0,Pack of 6 Foils item335 1 Nos
342 6.2 POLYBUTYLATE Braided Green 5x75 CM White 5x75 CM with Firm PTFE Pledgets 6mmx3mmx1.5mm ,1/2 Circle Tapercut SX Double Needle,26 MM,Size-2-0,Pack of 6 Foils item336 1 Nos
343 6.21 BONEWAX 2.0 GM item337 1 Nos
344 6.22 POLYPROPYLENE Blue Monofilament 102 CM ,3/8 Circle Circle Round Body Visiblack(220 Microns) Double Needle,13.1 MM,Size-6-0,Pack of 12 Foils item338 1 Nos
345 6.23 POLYPROPYLENE Blue Monofilament 90 CM , 3/8 Circle Round Body (320 Microns) Double Needle, 13.1 MM,Size-5-0,Pack of 12 Foils item339 1 Nos
346 6.24 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,26 MM,Size-3-0,Pack of 12 Foils item340 1 Nos
347 6.25 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,17.4 MM,Size-5-0,Pack of 12 Foils item341 1 Nos
348 6.26 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,17 MM,Size-4-0,Pack of 12 Foils item342 1 Nos
349 6.27 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round Body (220 Microns) Double Needle,9.3 MM,Size-7-0,Pack of 12 Foils item343 1 Nos
350 6.28 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round Body (220 Microns) Double Needle,9.3 MM,Size-8-0,Pack of 12 Foils item344 1 Nos
351 6.29 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round Body (220 Microns) Double Needle,9.3 MM,Size-7-0,Pack of 12 Foils item345 1 Nos
352 6.3 POLYPROPYLENE Blue Monofilament 75 CM ,3/8 Circle Round Body (380 Microns) Double Needle,13 MM,Size-6-0,Pack of 12 Foils item346 1 Nos
353 6.31 POLYPROPYLENE Blue Monofilament 90 CM ,1/2 Circle Round Body Double Needle,25.9 MM,Size-4-0,Pack of 36 Foils item347 1 Nos
354 6.32 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round body Double Needle,13 MM,Size-6-0,Pack of 36 Foils item348 1 Nos
355 6.33 POLYPROPYLENE Blue Monofilament 60 CM ,3/8 Circle Round Body, Taper Point BV175-6 Double Needle,8 MM,Size-8-0,Pack of 36 Foils item349 1 Nos
356 6.34 5-Chloro-2-(2,4 – Dichlorophenoxy) Phenol COATED POLYGLACTIN 910 SUTURE OF 70CM Undyed ,3/8 Circle PS-1 Prime,24 MM,Size-3-0,Pack of 36 Foils item350 1 Nos
357 6.35 5-Chloro-2-(2,4 – Dichlorophenoxy) Phenol COATED POLYGLACTIN 910 SUTURE OF90CM Undyed ,1/2 Circle Round Body Taper Point CT-1,36.4 MM,Size-2-0,Pack of 36 Foils item351 1 Nos
358 6.36 5-Chloro-2-(2,4 – Dichlorophenoxy) Phenol COATED POLYGLACTIN 910 SUTURE OF90CM Undyed ,1/2 Circle Round Body Taper Point CT-1,36.4 MM,Size-1-0,Pack of 36 Foils item352 1 Nos
359 6.37 5-Chloro-2-(2,4 – Dichlorophenoxy) Phenol COATED POLYGLACTIN 910 SUTURE OF90CM Undyed ,1/2 Circle Round Body Taper Point CT-1,36.4 MM,Size-1,Pack of 36 Foils item353 1 Nos
360 6.38 STEEL Monofilament 2x75 CM ,1/2 Circle Round Body Blunt Point,44 MM,Size-6,Pack of 6 Foils item354 1 Nos
361 6.39 STEEL Monofilament 2x75 CM ,1/2 Circle Round Body Blunt Point,44 MM,Size-5,Pack of 6 Foils item355 1 Nos
362 6.4 STEEL Monofilament 4x45 CM ,1/2 Circle Conventional Cutting,48 MM,Size-6,Pack of 12 Foils item356 1 Nos
363 6.41 STEEL Monofilament 4x45 CM ,1/2 Circle Conventional Cutting,48 MM,Size-5,Pack of 12 Foils item357 1 Nos
364 6.42 SUTUPAK 2x75 CM ,Size-4-0,Pack of 12 Foils item358 1 Nos
365 6.43 SUTUPAK 2x75 CM ,Size-3-0,Pack of 12 Foils item359 1 Nos
366 6.44 SUTUPAK 2x75 CM ,Size-2-0,Pack of 12 Foils item360 1 Nos
367 6.45 SUTUPAK 2x75 CM ,Size-1-0,Pack of 12 Foils item361 1 Nos
368 6.46 SUTUPAK 2x75 CM ,Size-1,Pack of 12 Foils item362 1 Nos
369 6.47 SUTUPAK 2x75 CM ,Size-2,Pack of 12 Foils item363 1 Nos
370 6.48 Vascular sling tape of all sizes with and without needle item364 1 Nos
371 6.49 Mitral Valve sutures(2-0 Polyester)pledgeted on 26 mm ½ circle cutting taper end double armed needle item365 1 Nos
372 6.5 Aortic valve sutures(2-0 Polyester)pledgeted on 17.5 mm ½ circle taper cut double arm needle item366 1 Nos
373 6.51 White Cotton umbilical tape 1/8”x 18”(0.32 cmx45 cm) item367 1 Nos
374 6.52 (i) Vented Endotracheal Bougies\nAbout 15 F in calimeter and two CM in length (which might vary slightly depending upon manufacturer).\n item368 1 Nos
375 6.53 (ii) Proseal laryngeal Mask Airway (LMA)\n LMA Proseal size 1.5, 2, 2.5, 3, 4, 5, Size cuff deflator, Size Introducer (1-2, ½, 3-5)\n item369 1 Nos
376 6.54 (iii) Laryngeal Mask Airway O LMA classic\nLMA Classic Size 1, 1/12, 2, 2.5, 3, 4, 5, 6, Cuff Deflator size 3-4, 5\n item370 1 Nos
377 6.55 (iv) Intubating Mask Laryngeal Airway\nLMA Fastrack size 3, 4, 5, Stabiliser Rod, ETT 6.0mm, 6.5, 7.0, 7.5, 8.0mm.\n item371 1 Nos
378 6.56 Artifical heart Valve Aortic Mechanical Tilting Disc.\n• Indigenous, Rigid Tilting Disc, Rotatable heart Valve, Mechanical, All sizes ( No. 17, 19, 21, 23, 25, 27)\n item372 1 Nos
379 6.57 Artificial Heart Valve Mitral Mechanical Tilting Disc\n• Indigenous, Rigit Tilting Disc, Rotatable heart Valve, Mechanical, All sizes (No. 23, 25, 27, 29, 31)\n item373 1 Nos
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail