Agricultural And Processed Food Products Exports Development Authority-APEDA has published Construction Of 2 Unit Of Bachelor Barrack For Chawkidar , Apeda , Itanagar ( Package-1 ). Submission Date for this Tender is 26-08-2019. Barrack Tenders in Urja Bhawan Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: C/o 2 (two) unit Bachelor barrack for Chowkidar, APEDA at Itanagar Dated Itanagar the 5th August'2019 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | SH: EARTH WORK | |||
| 2 | 1.1 | Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto 1.50 m. | 49.5 | cum | |
| 3 | 1.2 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. | 78.23 | cum | |
| 4 | 1.3 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. | 44.4 | cum | |
| 5 | 1.4 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. | 10.6 | cum | |
| 6 | 1.5 | Providing and laying of boulder 90mm to 150mm size as per direction Engineer-in-charge | 9.64 | cum | |
| 7 | 2 | SH: RCC WORK | |||
| 8 | 2.1 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). | 11.5 | cum | |
| 9 | 2.2 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). | 2.81 | cum | |
| 10 | 2.3 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). | 10.66 | cum | |
| 11 | 2.4 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). | 9.58 | cum | |
| 12 | 2.5 | Reinforced cement concrete in chajjas exceeding 15mm in thickness upto floor two level including centring and shuttering complete but excluding the cost of reinforcement with 1 : 2 : 4( 1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size). | 0.38 | cum | |
| 13 | 2.6 | Reinforced cement concrete work in shelves up to floor two level excluding cost of centering and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). | 0.38 | cum | |
| 14 | 2.7 | Centring and shuttering including strutting, propping etc and removal of form work for : | |||
| 15 | 2.8 | a) Foundation, footings, bases of columns etc. and mass concrete. | 65.04 | sqm | |
| 16 | 2.9 | b) Column, pillars, posts and struts etc. | 11.25 | sqm | |
| 17 | 3 | c) Beam, lintel | 103.33 | sqm | |
| 18 | 3.1 | d)Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). | 63.5 | Sqm | |
| 19 | 3.2 | Reinforcement of RCC work including bending, binding and placing in position complete. a) Mild steel | 4437.97 | kg | |
| 20 | 4 | SH: BRICK WORKS | |||
| 21 | 4.1 | Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand). | 18.44 | cum | |
| 22 | 4.2 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. | 117.38 | sqm | |
| 23 | 4.3 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. | 117.38 | sqm | |
| 24 | 5 | SH: WOOD WORK | |||
| 25 | 5.1 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. | 142.94 | Ten Cudm | |
| 26 | 5.2 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. a) 35mm thick | 14.49 | Sqm | |
| 27 | 5.3 | Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grain or cross bands and face veneers on both faces of shutters. a) 40 mm thick including anodized aluminum butt hinges with necessary screws. | 22.26 | sqm | |
| 28 | 5.4 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill. | 491.4 | Kg | |
| 29 | 5.5 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). | 64 | each | |
| 30 | 5.6 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete. | |||
| 31 | 5.7 | a) 300 x 10 mm | 16 | Each | |
| 32 | 5.8 | c) 150 x 10 mm | 32 | Each | |
| 33 | 5.9 | Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete. | |||
| 34 | 6 | a) 125 mm | 24 | Each | |
| 35 | 6.1 | b) 100 mm | 20 | Each | |
| 36 | 6.2 | Providing and fixing 50 cm long aluminum kicking plate 100 x 3.15 mm anodised, transparent or dyed to required color or shade with necessary screws etc complete. | 12 | Each | |
| 37 | 6.3 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. | 4 | each | |
| 38 | 6.4 | Providing and fixing MS door latch with necessary screws etc complete. | |||
| 39 | 6.5 | a) 300 x 20 x 6 mm \n | 8 | each | |
| 40 | 6.6 | b) 250 x 20 x 6 mm | 2 | each | |
| 41 | 7 | SH: Flooring Work | |||
| 42 | 7.1 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) finished with afloating coat of neat cement. b) 40 mm thick | 66.95 | Sqm | |
| 43 | 7.2 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement, including rounding of junctions with floor. b) 18 mm thick | 47.9 | sqm | |
| 44 | 8 | SH: FINISHING WORK | |||
| 45 | 8.1 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). | 131.34 | Sqm | |
| 46 | 8.2 | 15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall. | 151.02 | Sqm | |
| 47 | 8.3 | Neat cement punning. | 45.6 | Sqm | |
| 48 | 8.4 | Applying one coat of cement primer of approved brand and manufacture on wall surface. | 214.35 | Sqm | |
| 49 | 8.5 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. | 214.35 | Sqm | |
| 50 | 8.6 | Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete. | 14.46 | Sqm | |
| 51 | 8.7 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. | 80.76 | Sqm | |
| 52 | 8.8 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. | 80.76 | Sqm | |
| 53 | 8.9 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. | 14.46 | Sqm | |
| 54 | 9 | SH: DRAINAGE | |||
| 55 | 9.1 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/Aggrigate 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surface with 12 mm thick cement mortar 1:3 (1 cement : 3 fine sand ) including shuttering complete. | 36 | mtr | |
| 56 | 9.2 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. | |||
| 57 | 9.3 | a) 100 mm dia SW pipes | 4 | mtr | |
| 58 | 9.4 | b) 150 mm dia SW pipes | 8 | mtr | |
| 59 | 9.5 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. | |||
| 60 | 9.6 | a) 100 mm dia SW pipes | 4 | mtr | |
| 61 | 9.7 | b) 150 mm dia SW pipes | 8 | mtr | |
| 62 | 9.8 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design: a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). | 2 | Each | |
| 63 | 9.9 | Consruction of soak pit 1.2x1.1x1.2 m filled with brick bats includind SW drain pipe 100mm dia and 1.2m long complete as standard design. | 1 | Each | |
| 64 | 10 | SH : WATER SUPPLY | |||
| 65 | 10.1 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (External work). | |||
| 66 | 10.2 | a) 15 mm nominal bore | 20 | mtr | |
| 67 | 10.3 | b) 20 mm nominal bore | 15 | mtr | |
| 68 | 10.4 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). a) 15 mm nominal bore | 30 | mtr | |
| 69 | 10.5 | Providing and fixing brass stop cock of approved quality: a) 15 mm nominal bore | 4 | each | |
| 70 | 10.6 | Providing and fixing brass stop cock of approved quality. | |||
| 71 | 10.7 | a) 15 mm nominal bore | 2 | each | |
| 72 | 10.8 | b) 20 mm nominal bore | 2 | each | |
| 73 | 11 | SH : SANITARY INSTALLATION | |||
| 74 | 11.1 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.: b) Orissa Pattern WC Pan | 2 | each | |
| 75 | 11.2 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality. | 2 | each | |
| 76 | 11.3 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. | 2 | each | |
| 77 | 11.4 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. | 2 | each | |
| 78 | 11.5 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). a) 750 x 20 mm size | 2 | each | |
| 79 | 11.6 | Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sink size 600x450x150 mm | 2 | each | |
| 80 | 11.7 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. | |||
| 81 | 11.8 | a) 100 mm dia | 6 | mtr | |
| 82 | 11.9 | b) 75 mm dia | 8.7 | mtr | |
| 83 | 12 | Providing and fixing sand cast iron heel rest sanitary bend. | |||
| 84 | 12.1 | a) 100 mm dia | 2 | each | |
| 85 | 12.2 | b) 75 mm dia | 2 | each | |
| 86 | 12.3 | Providing and fixing sand cast iron single equal plain junction of required degree. a) 100 x 100 x 100 mm | 4 | each | |
| 87 | 12.4 | Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors: a) 100 mm inlet and 100 mm outlet | 6 | mtr | |
| 88 | 13 | SH: MISCELLANEOUS | |||
| 89 | 13.1 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. | 15.69 | Sqm | |
| 90 | 13.2 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone shingle 20 mm nominal size) excluding the cost of centring an shuttering in. a) Foundation and Plinth | 0.36 | Cum | |
| 91 | 13.3 | Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor\ntwo level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in : Long walls | 0.26 | Cum | |
| 92 | 13.4 | Centring and shuttering including strutting, propping etc and removal of form work for : a)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | 2.58 | Sqm. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
