Supply Of Tools Equipments Machineries For Govt Iti Deoria - stilson wrenches 25 cm, pipe cutter 6 mm to 50 mm wheel type., pipe bender spool type up to 25 mm. with stand manually operated., adjustable pipe chain tonge to take pipes up to 300 mm., adjustable spanner 38 cm long., screw thread micrometer with interchangeable 0-25mm. pitch anvils for checking metric threads 60., depth micrometer 0-25 mm. 0.01 mm., vernier caliper 0-150 mm. l.c. 0.02 mm., engineer‟s try square (knife-edge) 150 mm blade., machinist (grinder), steel rule 150mm (graduated both english and metric)., outside calipers (spring) 250mm, odd leg caliper 150 mm, scriber 150 x 3 mm, plier 150 mm, hammer copper 0.50 kg., hammer engineers, ball peen 0.50 kg., blocks vee 150 x 100 x 100 mm (fitted with clamps, hardened and ground), indicating micrometer 0.25 mm range, graduation, 01 mm graduation of dial 0.001 mm range of dial + 0.02, oil stone carborandum, coarse on one side and fine on other slip 100 x 18 mm triangular, straight edge engineers 300 x 50 x 12 mm bevelled edge, screw driver 200 mm blade, screw driver 300 mm blade, spanner d.e. open jaw 3 to 18 mm by 3 mm, scraper flat 25 x 200 mm with handle, scraper half round 75 x 12 x 200 mm with handle, scraper triangular 62 x 9 x 200 mm with handle, techometer with male and female rubber attachments (upto 0-10,000rpm), table chuck 75 mm jaw swivel base 200 mm dia. 3 jaw with bolting arrangement and graduated in degrees, vices, machine plain 150 jaws x 100 mm openings, universal machine vice 100 mm for grinding, wheel dressers, steel type (huntington) (large), wheel dressers, steel (huntington type small), demagnetizer chuck, centre punch 150 x 6 mm dia, reamer adjustable 6 to 16 x 1.5 mm, surface plate 60 x 60 cms, hand drill 6 mm, taps and dies set b.a.b.s.f.b.s.w. and american, drill twist (straight shank) 1/8 to 1/2 by 1/64, drill twist (metric) 3 mm to 12 mm, in step of 1 mm,