}

Chemical Oil and Gas, Additives Supply, Additive, Services, Business Management Services, ISO Consultancy, Machinery and Tools, Hardware and Fasteners, Screws, Adhesives and Sealants, Tape Supply, Vehicles and Accessories, Railway Machinery, Railway Ancil, DEORIA-Uttar Pradesh

Department Of Technical Education has published Chemical Oil and Gas, Additives Supply, Additive, Services, Business Management Services, ISO Consultancy, Machinery and Tools, Hardware and Fasteners, Screws, Adhesives and Sealants, Tape Supply, Vehicles and Accessories, Railway Machinery, Railway Ancil. Submission Date for this Tender is 24-12-2018. Additive Tenders in DEORIA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

18456449
Chemical Oil and Gas, Additives Supply, Additive, Services, Business Management Services, ISO Consultancy, Machinery and Tools, Hardware and Fasteners, Screws, Adhesives and Sealants, Tape Supply, Vehicles and Accessories, Railway Machinery, Railway Ancil
Open Tender
Indian
Uttar Pradesh
DEORIA
24-12-2018

Tender Details

Supply And Commissioning Of Instruments Under New Poly :- 155 Office Rod With Hook. Each Rod Should Be Of Mild Steel Conduits Conforming To Is: 1239. Length Of Rod Should Be 3000+_10Mm And Diameter 30Mm. Rad Should Be Painted With Alternate White And Red / Black Band Length 200+_3Mm .Each Rod Should Be Legibly And Permanently Engraved With Manufacturer ‘S Name Or Trade Mark And Isi Certification Mark. 156 Line Ranger 157 Octagonal Cross Staff 158 Plane Table Complete Set With All Accessories 159 White Clap Steel Tape Freeman 30M 160 Surveyor’S Compass 100 Mm Dia 161 Telescopic Alidade 175Mm .The Column Fitted Vertically On The Base Plate Shall Have The Provision Of Slight Fitting In A Transverse, Forward And Backward Direction .It Shall Also Be Provided With A Show Motion Screw For The Pointing Of The Telescope In The Azimuth .The Optical Part Shall Confirm To Is:988.Telescope: Magnification – 25 X, Clear Objective Aperture -40 Mm, Field Of View 1.3” Shortest Focusing Distance- 2.0M.Multiplication Constant: Face Left Distance -100, Face Right Distance -200, Height Differences +_25, +_100 ( If Three Pairs Of Inclined Middle Carver Are Provided ) And Additive Constant –Zero .The Telescope Shall Be Internally Provided With Reducing Carver And Their Images Shall Be Projected Into The Field Of View Of The Telescope. Reducing Curves Shall Fulfill The Requirements Mentioned In Articles 4.15.1 And 4.15.2 Of Is:12874-1989.Eye Piece : Rotatable Diagonal Eye Piece Inclined At 45*Dipodic Scale : Shall Be Provided With The Eye Piece And Shall Have A Range Of +_5Dvertical Circle:360” Glass Are Vertical Circle With Graduation Interval Of 10 Minutes And Its Regarding Shall Internally Projected In To The Field Of View The Telescope .It Shall Enable Reading Up To 1 Minute By Estimation .Each Degree Division Shall Be Marked Longer Than The Minute Division.Slighting Vanes: Two Slighting Vanes Shall Be Provided On The Telescope.Picker : The Piker Shall Be Mad

Key Value

Document Fees
Refer document
EMD
INR 7500.0 /-
Tender Value
INR 7.50 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail