Tenders are invited for Renovation of Operation Room in Gulan Hospital and Renovation of Chira High School in Duhok Governorate 1 Demolition Works: Provision of materials, manpower for making openings in the wall for the new doors with dimensions (1*2.1 )m the wall thick is 40 cm or 20 cm ,the work include removing the existed doors between the sterilization room and the operating room then closing the holes by using (gypsum boards and metal frame with all work requirement ),the work include remove the exsisted wash basin cleaning and removing all debris out of the site. No. 1 2 False ceiling: Provide materials manpower to remove the old existing false ceiling then supply and install false ceiling Acoustic board tiles (600x600mm) for the rooms, halls (sample should be provided for approval), the price includes all necessary accessories and all necessary works should be done according to the site requirement and specification. m2 200 3 Painting Supply materials required equipment and skilled labor to paint the interior walls with three coats of best-approved high-quality Antibacterial paint. m2 350 4 Antibacterial Wall Covering: Provide materials manpower for covering the walls of Operating Rooms by Anti-bacteria PVC carpet 1.5 mm thickness .the work include repairing all cracks on the wall and replastering them with proper material. including crack plaster additive then leveling the surface with the existing plaster on pre-leveled surface, with acrylic glue in water solution. m2 300 5 Antibacterial Flooring: Provision of materials and manpower for installation of Anti-bacteria PVC carpet 2 mm thickness, for Corridors and room floors, on pre-leveled surface, with acrylic glue in water solution, including properly PVC skirting board. the work include Self-leveling cement product for interior floors settled on any kind of existing floor (ceramic tiles, natural stone, cement) fast setting for thicknesses from 1 to 10 mm . m2 50 6 Antibacterial Flooring:- Provision of materials for installation of Antistatic and Anti-bacteria PVC carpet 2 mm thickness, For inside operation hall floor by placing on pre-leveled surface, with acrylic glue in water solution, including properly PVC skirting board. the work include Selfleveling cement product for interior floors settled on any kind of existing floor (ceramic tiles, natural stone, cement) fast setting for thicknesses from 1 to 10 mm M2 200 7 Aluminum Doors: Supply and install aluminum door wide section (G60) with section not less than (6x6) cm in dimension (1*2.1 )m and thickness 1.7mm ,the price include the key switches and handles, one layer of glass (6mm), (silicone, hinge, ...) and all accessories required for the work. No. 4 (Du3.1) Renovation of operation room in Gulan hospital/ Duhok Governorate 7 8 Automatic Sliding Aluminum Doors: Supply and installation of Automatic sliding door sealed dim. 150x210 cmSupply and installation of sliding automatic sealed door.The door is equipped with:- Slides in anodized stainless steel chrome code 304- Trolleys in stainless steel , complete of reinforced nylon wheels and derailing feedback wheel, adjustable for height and depth of the doors;- The door consists of an aluminum frame with rounded edges without corners and projections to avoid any dangers of getting hooked, cut or caught between the doors and antibacterial steel panel or Acrylic Solid Surface. The padded, enveloping the walls, must be made of steel sheets (AISI 304 satin) bent, with rounded corners minimum 17 mm, with enough space for the insertion of a lead sheet of 2mm thickness.Complete of:- Transmission by toothed belt of reinforced rubber with glass fibers and coated with antifriction material(30*30)cm or (25*25)cm- Selector / programmer keyboard functions with alphanumeric display with the function of the door- Carter coverage from sheet steel (stainless )The door must be provided with the accessories listed: 2 curtain safety sensors (EN 16005) 2 buttons type Contactless Command buttons, or touch, or elbow contact type Emergency battery - buffered Electric locking system of the doors. irradiation block sensor for accidental opening. No. 6 9 Wash Basin: Supply and install operation wash basin stainstell with automatic sensor mixer by length 3 m with all the required accessories. No. 4 10 LED Lighting: Supply and install and connecting 60*60cm and 68 watt LED specially designed for operation rooms with with one year warranty by using wires (2*2.5mm ) inside pvc pipes 25mm . No. 40 11 Sockets: Supply and install & operation test of electrical outlet for sockets by using (3*2.5mm2) single core wires in 25mm dia pvc. the price include all required materials, 13A stanless steel sockets, boxes, junctions for operation hall. No. 80 12 Procurement of materials for installation and testing Terminal oxygen (O2 outlet ) specially for medical Gases Turkish type. No. 35 13 Procurement of materials for installation and testing Terminal Vacume (Vacume outlet ) specially for medical Gases Turkish type. No. 15 14 Procurement of materials for installation and testing Terminal air medical air 4 bar specially for medical Gases Turkish type. No. 15 15 Procurement of materials for installation of simple fabric piece fixed on supply laminar air diffuser at operation hall. m.l 7 A1 Site Preparation:- Preparing the site, removing the existed wall ceramic tiles from walls and floors of toilets also removing the mosaic tile from floor, removing the toilets eastern pan pipes and gullies, the work include removing solid concrete block partition walls and plastic doors and cleaning the site from all debris. No 3 A2 Solid Concrete block : Supply materials and construction with concrete solid blocks (15x20x40)cm, width20 cm, height according to required design level for the toilets walls and also build 40cm as a retaining for construction of the ramp to persons with special needs, the price including filling the space between the blocks from inside and out side using cement mortar 1:3, with all requirements of work and according to instructions of site engineer. M3 25 A3 Filling Works: Provide machinery, equipment's and material to filling the central space of the ramp with well graded bolder of maximum size 25cm or sub-base type (A) by layers each 25cm with good watering and compaction, as per the design and required levels of the ramp. All the works should be carried out as per the instructions and satisfaction of the supervisor engineer. M3 15 A4 Concrete work for the Ramp and side walk: Supply workshop and material to casting 1.5m width of 12 cm thick reinforced concrete 1:2:4 ratio with BRC 15cm*15cm (4 mm) thick, the work include required shuttering works, using proper machine( Helicopter if requested) for leveling and smoothing the concrete face, using cutter for making joints every 3m, with all required works should be conducted according to the attached drawing and instruction of supervisor engineer. M2 150 A5 Cement plastering: Providing materials, staff and plastering with cement sand mortar 1:3, three layers (cement splatter dash, kafmal, saf ) 20mm thick min. The final layer should be very smooth, using SBR at a rate of 200gr per m2 and all the works should be done according to the specifications. M2 100 A6 Crack Repairing: Providing materials, staff and repairing the cracks on wall removing the all damaged plaster with width min 30 cm and fixing iron mesh fixed using iron angle .then plastering with gypsum three layers (cement splatter dash, kafmal, saf ) 20mm thick min adding additive SBR ,. The final layer should be very smooth, the work include also painting three layers of emulsion paint all the works should be done according to the specifications. ML 50 A7 Ceramic Tiles work for Walls: Supply material, required Equipment and man power for installing Ceramic tile (30x 90cm)for walls (Turkish or equivalent) (sample should be provided) and approved by supervisor engineer with stucco1:3 ratio. The work include using cement mortar and sealing the joints with white cement & lime grout and SPR color if required mixture) and all required works should be carried out according to the specifications. M 550 9 A8 Ceramic Tiles works for floor in toilets: Supply material, required Equipment and man power for installing Ceramic tile for floor (Turkish or equivalent) (sample should be provided) and approved by supervisor engineer with stucco1:3 ratio. The work include apply ceramic using cement mortar and sealing the joints with white cement & lime grout and SPR color if required mixture) and all required works should be carried out according to the specifications. M 250 A9 Steel Doors: Supply and install steel doors double plate 1.8 mm with dimensions (1*2.1) m with angle frame, the work include door locks, handles, hinges, latches, painting with anti-rust and three layers of oil paint with all required accessories, all works should be carried out according to the specifications. No 28 A10 Repairing Steel Doors: Supply and repairing the existing steel doors double plate, the work include welding, cleaning, door locks, handles, hinges, latches, painting with anti-rust and three layers of oil paint with all required accessories, all works should be carried out according to the specifications. No 25 Sub Total A in USD B WASH Works: Includes supply and installation of materials, pipes, all kinds of fittings, valves, mixers, bibcock taps, P-traps, gullies with cover, supports, hangers, plug and clips, all excavation with backfilling, placing concrete 1:3:6 under and around pipes, manpower for the installation and internal connection of the water system to hot and cold water and to the main water supply system. Al Tender Link :
