Tenders are invited for Purchase Of Barrier By Installation

Tender Detail

45444595
NAT210020723
Self Funded
Tenders are invited for Purchase Of Barrier By Installation
ICB
Western Asia
Commonwealth of Independent States, CIS
10-11-2021

Work Detail

Tenders Are Invited For Purchase Of Barrier By Installation 1 Number Of Barriers 4 Pieces Which Must Meet The Following Characteristics Intensive Use Arrow Length Not Less Than 5 Meters Speed Of Opening The Barrier Not More Than 4 Seconds Intensity Of Each Daily Opening Of The Barrier Not Less Than 2000 Openings Barrier Arrow Lighting Red Green Closed Red Green Open The Barrier Must Be Fitted With Safety Photo Elements To Prevent A Person From Entering The Bar Or Vehicle When Closing The Barrier Must Be For Outdoor Use And Dust Water Protection Not Less Than Ip54 Standard Shlagbaum E Power Consumption Not More Than 300W The Barrier Should Be Equipped With A 2 Channel Induction Hob Control To Which Two Independent Hobs Can Be Connected The Identification Speed Of The Induction Control Vehicle Shall Be Not More Than 120 Mph 2 Incoming Terminal Number 2 Pieces Dimensions Not More Than 140 Cm In Height Depth 35 Cm Width 30 Cm To Make It Easy To Pick Up The Card From Both A Car And An Off Road Vehicle The Frame Of The Device Must Be Made Of At Least 1 4 Mm Of Iron The Device Must Be Issued With Plastic Cards Of Mifare 1K Standard The Device Must Have At Least 350 Cards The Device Must Also Have An Access Reader For Additional Staff The Access Device Must Have A Color Screen Of At Least 7 Inches The Device Must Be Able To Work In Both Ethernet Network And 4G Gsm Network Also The Device Must Be Able To Work Without Connection To The Network Server For At Least 5 Days The Information Stored After The Connection Is Established Should Be Sent Automatically To The Server Software Principle Of Operation After Entering The Vehicle The Device Must Be Activated By The Sensors Placed On The Road Surface After Pressing The Button On The Device The Device Must Issue A Card After Physically Taking The Card The Barrier Must Be Raised And The Entry Of This Card Into The Parking Lot Must Be Fixed 3 Payment Exit Terminal Quantity 1 Piece PaymentMachine Dimensions Not More Than Height 165 Cm Depth 35 Cm Width 50 Cm To Make It Easy To Pay From Both A Car And An Off Road Vehicle Principle Of Operation Of The Device The Device Should Be Activated After Arriving At The Vehicle After Placing The Card Taken From The Device Entering The Device The Device Should Be Counted As The Amount To Be Paid According To Standing In The Parking Lot The Machine Should Be Able To Pay With Paper Money And Card In Case Of A Card Both Mastercardit And Visa Cards Should Be Paid In Case Of Additional Payment The Device Should Be Able To Return The Extra Amount In Case Of Payment By Card And In Case Of Payment Only Deduct The Amount Of The Specific Standing Hour The Recipient Of The Car Should Be Able To Receive And Sort The Car Received From The Customer So That It Can Be Returned To The Customer With His Car Technical Characteristics Of The Device Paper Money Recipient The Percentage Of Receipt Of Banknotes Should Be Not Less Than 98 Support Of Banknotes 5 10 20 And 50 Gel Both Old And New Modifications Money Counterfeiting Should Be Checked With Optical Inductive Dielectric And Ultraviolet Sensors Name Of Banknote Acceptance Not More Than 2 5 Seconds The So Called Cassette Storage Tank Should Be Designed For At Least 300 Banknotes The Cassette Should Be Opened Only With The Key Khurda Money Receiver Issuer At Least 4 Sections For Khurda Money Storage Should Have Support For 50 Tetri 1 Gel And 2 Gel Khurdi The Device Must Contain At Least 200 Gel The Device Must Have At Least 12 Inch Screen The Device Must Also Have A Card Receiver Swallower Who Will Receive Visitor Cards The Machine Must Have The Support Of All Cash Registers Received In The Tax Of Georgia Also After Changing The Special Card On The Device It Should Be Possible To Withdraw Money Deposit Money Remove Z Report And Remove X Report The Device Must Also Be Able To Pay The Fine For Lost Cards The Amount Of The Fine Must Be Determined From The Server Software The Device Should Work At 20 60 Degrees Must Be At Least 1 4 Mm Metal Frame The Device Must Be Able To Work In Both Ethernet Network And 4G Gsm Network The Device Must Also Be Able To Work Without A Connection To The Network Server The Information Stored After The Connection Is Established Should Be Sent Automatically To The Server Software 4 Plastic Cards Quantity Not Less Than 1000 Pieces Parking Management System Must Be Accompanied By Mifare 1K Classic Cards The Thickness Of The Cards Should Be Not Less Than 0 08 Mm The Card Should Also Have A Unique Card Number 5 Complete System Software Server Software Must Be Hosted On The Bidders Server It Should Be Possible To Access The Software After Entering The Username And Password The Status Of The Devices Should Be Reflected In The Software Whether The Cards Were Placed In The Incoming Terminals How Much Money Is In The Payment Devices The Software Should Also Include The Technical Problems Of The Machines Lost Connection With The Cash Register Lost Connection It Should Be Possible To Open The Barrier From The Software It Should Be Possible To Add Any Number Of Users To The Software It Should Also Be Possible To Change The Tariffs In The Software Through The Tariffs It Should Be Possible To Specify Free Time To Indicate The Cost Of The First Hour To Specify The Following Hours To Stand 24 Hours Separately It Should Also Be Possible To Create A Subscription Subscription Must Be Of 2 Types Preferential And Prepaid The Admission Period For Season Tickets Should Be According To The Following Days And The Number Of Admissions It Should Be Possible To Add And Delete Collection Cards From The Software The Software Should Have A Report Module In Which It Will Be Possible To View The Following Information Number Of Entries And Exits Number Of Funds Received Number Of Companies With Online Subscription All Information Should Be Available By Day Week Month 6 The Supplier Is Obliged To Ensure The Connection Of The Network Internet Cable To The Barriers The Length From The Place Indicated By The Buyer Is Not More Than 305 Meters 7 The Supplier Is Obliged To Provide A Fiber Optic Cable Not More Than 150 Meters Long From The Place Indicated By The Buyer 8 Media Envelope 19 System InstallationBids Accepted From 08 11 2021 00 00Deadline For Bid Submission 10 11 2021 12 00Bid Reduction Step 1 153 00 GelGuarantee Amount 961 GelGuarantee Validity Period 160 Day Disclaimer The Above Text Is Machine Translated For Accurate Information Kindly Refer The Original Document

Key Value

Tender Value
96,110 - GEL

Attachment

FileName File Description
Global Tender Document Tender Notice
Attachments
Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail