Tenders are invited for Compatible Information Storage System with Existing Netapp Equipment and Installation of it Deadline 27 Sep 2021 17 30 GMT 3 00 Atlantic Time Canada Caracas La PazFAO seeks to acquire and install an information storage system compatible with existing NetApp equipment within the framework of the Project Strengthening Governance for the Protection of Biodiversity through the Formulation and Implementation of the National Strategy on Invasive Alien Species GCP ARG 023 GFF In this regard interested suppliers are requested to submit offers based on the following Technical Specifications Each unit must be delivered with 1 one set of hardware and software configuration manuals These manuals may be delivered in paper format or through digital storage media The equipment must be powered at 220 V 50 Hz single phase with a 3 flat pin socket without the need for an additional transformer Configuration and firmware storage in non volatile memory It must include the necessary accessories to mount in standard 19 racks It must be no more than 2 rack units high One 1 Shelf DS212C with 12 NL SAS 4TB disks RAW capacity 48TB Usable capacity with RAID DP double parity and 2 spare disks 26 15TB Technical Functional Detail a Storage Capacity and Scalability The SAN offered must have the following capacities and characteristics 1 Initial capacity CI to provide raw or RAW 48 TB The disks that make up the storage may be of the following type SAS Serial Attached SCSI FC Fiber Channel or higher with an interface speed of at least 6 Gbps for SAS or at least 4 Gbps for FC and a rotational speed of at least 10 000 RPM minimum The minimum capacity of the disks that will be used for the storage composition will be SATA NL SAS disks 4TB minimum The disks that make up the storage may have a size of 3 5 or 2 5 If there are offers of the same price that meet all the other technical specifications requested the offer that includes 2 5 size discs will be chosen first b Performance and Scalability Characteristics The SAN offered must have the necessary connectivity ports Ethernet or FC as offered in order to support the connection of existing hosts In order to ensure the availability of the SAN it must have the following basic characteristics Connection of the hard drives that make up the SAN They must have a redundant path connection to the controllers They will have hot swap capability Disk controllers They will be redundant active active type both controllers are active and transfer data simultaneously providing high availability and at the same time allowing performance improvement through load balancing while both controllers are running They must be capable of being hot wasp SAN network Redundant communication switches FC Ethernet switches with double way connection between all SAN components and switches 2 Connection of the Hosts to the SAN communication switches It must be done in two ways For it the HBA boards of the hosts to be connected to the SAN must provide at least 2 two communication ports according to the required type FC Ethernet During the site visit the bidders must verify this last condition and in the event that the HBA plates do not comply with it the provision of the corresponding HBA plates must be included RAID configurations support Bidders must report the capacity of the system offered in relation to this feature However it must at a minimum support RAID 0 1 0 1 10 5 and 6 configurations Redundant hot swap power supplies Redundant ventilation with hot swap type fans The supplier must contemplate the professional services for the installation configuration and commissioning of the equipment offered the provision of the corresponding HBA plates must be included RAID configurations support Bidders must report the capacity of the system offered in relation to this feature However it must at a minimum support RAID 0 1 0 1 10 5 and 6 configurations Redundant hot swap power supplies Redundant ventilation with hot swap type fans The supplier must contemplate the professional services for the installation configuration and commissioning of the equipment offered the provision of the corresponding HBA plates must be included RAID configurations support Bidders must report the capacity of the system offered in relation to this feature However it must at a minimum support RAID 0 1 0 1 10 5 and 6 configurations Redundant hot swap power supplies Redundant ventilation with hot swap type fans The supplier must contemplate the professional services for the installation configuration and commissioning of the equipment offered Redundant hot swap power supplies Redundant ventilation with hot swap type fans The supplier must contemplate the professional services for the installation configuration and commissioning of the equipment offered Redundant hot swap power supplies Redundant ventilation with hot swap type fans The supplier must contemplate the professional services for the installation configuration and commissioning of the equipment offered Disclaimer The above text is machine translated For accurate information kindly refer the original document
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
