Drill-Driver. Chuck Type: Quick-Release Chuck. Number Of Operating Speeds 2. Chuck Diameter 13. Maximum Idle Speed 1400 Rpm. Maximum Torque 35 Nm. Battery Powered. Reverse Functions Presence Of Shock-Impact. Equipment: Case, Charger, Two Batteries. Battery Voltage 24 V. Battery Capacity 4.0 Ah, Convector Heater. Heating Area 25 M². Heating Power 2500 W. Temperature Adjustment, Handle For Moving, Wheels For Moving. Number Of Power Modes 3., Welding Torch. Welding Wire Diameter, Mm 0.6-1. Length, M 4. Welding Current At 50% Duty Cycle In Co₂, A 160. Welding Current At 50% Duty Cycle In A Gas Mixture, A 130. Type Of Cooling Air. Possibility Of Replacing The Gander. The Bending Angle Of The Gooseneck Is 40°. Flexible Power Cable. Wear-Resistant Coating Of Power Cable. Reliable Fixation In The Hand Due To Rubber Inserts In The Handle. Smooth Trigger. Suitable For All Welding Machines With Euroadapter., The Propane-Oxygen Injection Cutter Is Designed For Cutting, Cutting And Heating Parts, Blanks, Sheets And Rolled Products Made Of Ferrous Metals. Combustible Gas: Propane. Type Of Welding/Cutting: Gas Cutting. Design: Lever. Maximum Thickness Of The Metal Being Cut: 300 Mm. Oxygen Inlet Pressure Not Less Than: 3.50–10.00 Kgf/Cm ²The Cutter Is Equipped With Four Internal Mouthpieces. Propane Inlet Pressure Is Not Less Than: 0.01–1.50 Kgf/Cm². Oxygen Consumption When Operating On Propane: 4.10–33.20 M³/H. Propane Consumption: 0.41–0.86 M³/H. Connecting Dimensions: Universal Nipple D 6/9
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
