The Microchip Built Into The Cartridge Must Have The Following Designation: Article And Lot Number. The Article And Lot Number On The Chip Must Match The Article And Lot Number On The Cartridge Label. The Microchip Must Have An Engraving Measuring 1.5Mm X 1.5Mm - An Image Of A Zebras Head. Mandatory Equipment And Other Requirements: Only Original Cartridges: A Set Of 3 Pieces, Including 1 Piece Red, 1 Piece Yellow, 1 Piece Green. Each Cartridge Must Contain 200 Identifiers. The Cartridge With Clamps Must Have A Factory Original Synthetic White Sticker With The Following Information On It: Article Number, Barcode, Which When Scanned Should Duplicate The Article, Image Of A Zebra Head, Size, Color, Method Of Fixation, Batch Number, Production Date, Quantity, Manufacturer’S Website. The Cassette Must Contain Information From The Product Manufacturer About The Maximum Amount Of Silver Phosphate Glass No. 308069-39-8 On The Antimicrobial Coating Of The Carrier. Each Cassette Must Have Individual Packaging (Box). Inside The Box, Along With The Cassette, There Must Be An Information Leaflet Insert With Double-Sided Information About The Rules For Using The Product With The Equipment, The Patient, Or The Information Must Be Printed On The Inside Of The Box Of Each Cartridge. On The Back Of Each Clip, Information About The Original Origin Of The Product Must Be Displayed - An Image Of A Zebra Head, The Name Of The Clip Model And The Manufacturer’S Website. On The Title Side Of The Cassette Packaging There Must Be An Information Label With The Full Name Of The Cassette Model, Brand Name, Image Of A Zebra Head, Size, Type, Factory Article Number, Total Number Of Clips, Batch Number, Country Of Origin, Date Of Manufacture. The Size Of The Clamps Is Within 1X11 (25X279mm). Gost 21776-87
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
