Thermal Insulation Container With Automatic Heating And Maintaining The Temperature Of Infusion Solutions. A Thermal Container Made Of Moisture-Resistant Awning Fabric With A Thermal Insulation Frame, The Internal Volume Of Which Is Divided Into Two Compartments - Large (For 4 Bottles) And Small (For 2 Bottles), Each Of Which Is Equipped With Its Own Heating Element And Fan. Total Number Of Spaces For Bottles: 6 Bottles Of 400 M Each, With A Diameter Of No More Than 80 Mm, A Height Of No More Than 210 Mm. Power Supply: From The Vehicles On-Board Network Mode Above 11 V - From 11 To 14.5 V Mode Above 13 V - From 13 To 14.5 V. Current Consumption, A - No More Than 4. Minimum Supply Voltage At Which The Heating Mode Is Turned On, B Mode Above 11 V - From 11 ±0.2 V Mode Above 13 V - From 13 ±0.2 V. Steady-State Temperature Value In Heating Mode, °C ±34±2. Loss Of Temperature Of Solutions At Minus 25°C In 1 Hour, °C-2. Operating Mode: Continuous. Average Service Life: At Least 3 Years. Mean Time Between Failures, Hour - 2000. Type Of Protection Against Electric Shock: Class Ii. Degree Of Protection Against Moisture Penetration - Lpx4. Type Of Climatic Version - U1.1. Overall Dimensions: Not Less Than Mm (320*270*310)±50. Weight: 2.5 Kg. For Convenient Placement And Avoiding Mutual Contact Of Bottles, The Container Is Equipped With Removable Liners-Separators. For Ease Of Use, The Container Has A Shoulder Strap And A Handle For Removal From The Transport Cell Of The Car.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
