|
bids are invited for fabrication of fixtures and interior designing with customised furnitures of key offices/rooms of new otm complex and cgom total quantity : 63; 1 (a) (cgom) ground floor (i) wall mural for the entrance wall. area: 226.8 sq ft (ii) provide the panelling with bwp plywood of 12 mm unit to be of hpl sheet. groves as per the design area:144 sq ft. 1 job 2 sofa - single seater-4 nos with 01 centre table 1 job 3 (b) reception receptiontable :(i) provide the unit with bwp plywood of 16 mm with open shelves unit to be century/ greenlam& other similar brand laminate ply thickness 1 mm size:24.65 sq ft. (ii) side table : provide the unit with bwp plywood of 16 mm with open shelves, unit to be century/ greenlam& other similar brand laminate ply thickness 1 mm . size:13.05sq ft. (iii) provide the unit with bwp plywood, the paneling to be done to fix the fluted wall panel is an engineered decorative component made from compressed wood on both side and unit to be century/ greenlam& other similar brand laminate ply thickness 1 mm area:115 sq ft. (iv) logo - ss gold letter with backlit design qty 01. (v)provide the panelling with bwp plywood of 12 mm, unit to be century/ greenlam& other similar brand laminate ply thickness 1 mm . groves as per the design. area: 530 sq ft. 1 job 4 (c) reception (i) reception rolling chair-2 nos (ii) sofa - 3 seater- 1 no (iii) sofa - 2 seater-1 no (iv) sofa - single seater -1 no (v) wooden centre table1no (vi) carpet of flooring 9 x 5 ft. 1 job 5 (d) lobby (i) provide the panelling with bwp plywood of 12 mm, the unit to be century/ greenlam& other similar brand laminate ply thickness 1 mm . groves as per the design. area 620 sq ft. . 1 job 6 lobby (ii) sofa - 3 seater-1 no ,(iii) sofa - 2 seater- 1 no (iv) sofa - single seater- 2 nos (v) wooden centre table- 1 no (vi) carpet of flooring 9 x 5 ft- 1 no . 1 job 7 (e) dining hall (i) dining wall: provide the panelling with bwp plywood of 12 mm the unit to be century/ greenlam & other similar brand laminate ply thickness 1 mm . groves as per the designarea:500 sq ft. (ii) painting for the remaining area area:985 sq ft (iii) sliding door with panelling size :218.5 sq ft . 1 job 2 8 dining hall (i) dining table 8 seater-08 nos provide the unit with plywood of 16 mm and top of corian finish and the bottom will be of century/ greenlam or equivalent laminate of 1 mm thickness., (ii) dining table 6 seater- 1 no, (iii) dining chair- 56nos 1 job 9 (f) blue room dining (i) provide the unit with bwp plywood of 16 mm, the unit to be century/ greenlam & other similar brand laminate ply thickness 1 mm with premium hinges and handle. 2 mm edge banding will be done for the shutters. area:40sq ft, (ii) book shelf provide the unit with bwp plywood of 16 mm, the unit to be century/ greenlam & other similar brand laminate ply thickness 1 mmarea :12 sq ft (iii) top panel- provide the panelling with bwp plywood of 12 mm, the unit to be century/ greenlam & other similar brand laminate ply thickness 1 mm. groves as per the design. area: 92 sq ft . 1 job 10 8 seater dining table with chairs. 1 set 11 (g) recreation room (i) tv unit- bottom unit to be of century/ greenlam or equivalent brand laminate of 1 mm thickness with premium hinges and handle. provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate or equivalent brand of 1 mm thickness. groves as per the design. area:59.5 sq ft. (ii) glass door -12 mm tough glass - glass hardware - ozone size 5 feet x 8 feet (iii) dart wall panel: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent brand laminate of 1 mm thickness. groves as per the design. area:69 sq ft. (iv) wooden laminated flooring area: 277.50 sq ft. 1 job 12 (iv) foosball ball table table size (inch) - 55 x 31.5 x 34.5 (v) air hockey table – 6 ft. 1 set 13 (vi) sofa - 2 seater-1 no (vii) sofa - single seater-2 nos (viii) wooden centre table1 no (ix) carpet of flooring- 1 no . 1 set 3 14 (h) gym room (i) gym rubber flooring size: 462.5 sq ft . 1 job 15 (ii) wooden door with fittings and handle size: 40 sq ft (iii) wall panelling with mirror: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness: area : 212.75 (iv) columns: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design. area :125sq ft . 1 job 16 (j) second floor (i) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design. area: 620 sq ft . 1 job 17 (ii) sofa - 3 seater-1 no (iii) sofa - 2 seater-1 nos (iv) wooden centre table- 1 no (ix) carpet of flooring 9 x5 ft - 1 no . 1 set 18 (k) 3rd floor (i) lobby provide the panelling area: 960 sq ft . 1 job 19 (ii) sofa - 3 seater-1 no (iii) sofa - 2 seater- 1 nos (iv) wooden centre table- 1 no (ix) carpet of flooring 9 x5 ft - 1 no . 1 set 20 (l) bar room (i) provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. frosted glass profile shutter will be givenarea :82.50sq ft . 1 job 21 (ii) bar table - provide the unit with plywood of 16 mm and top of granite finish and the bottom will be of century/ greenlam or equivalent laminate of 1 mm thickness. size :51.80sq ft (iii) bottom panel: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design. size:315sq ft (iv) columns: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design size : 160 sq ft . . 1 job 4 22 wooden laminated flooring area: 900 sq ft . 1 job 23 (vi) bar stools- 4 nos (vii) leatherette single sofa-4 nos (viii) leatherette 3 seater sofa-2 nos (ix) centre table-2 nos (x) carpet of flooring 9 x 5 ft-02 nos. 1 set 24 (m) 4th floor lobby (i) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1 mm thickness. groves as per the design. area: 620 sq ft . 1 job 25 (ii) sofa - 3 seater-1 no (iii) sofa - 2 seater-1 nos (iv) sofas single seater-2 nos (v) wooden centre table- 1 no (vi) carpet of flooring 9 x5 ft - 1 no . 1 set 26 vvip suite (i) dining room: bottom unit & top ledges - provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters area: 50 sq ft . (ii)vip dining: 6 seater dining table with chairs: 1 no (iii) carpet for flooring 9 x 5 ft: 1 no . 1 job 27 (n) vvip suite lounge (i)tv unit: bottom unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1 mm thickness. groves as per the design area: 72 sq ft. (ii) texture painting for the remaining area area: 50 sq ft . 1 job 28 (iii) sofa - 2 seater- 1 nos (iv) sofa single seater-1 no,(v) wooden centre table- 1 no (vi) carpet for flooring 9 x5 ft - 1 no (vii) study accent chair . 1 set 29 (p) vvip suite bedroom (i) cot with headboard-1 no,(ii) 8-10 inch matress-1 no,(iii) bed bench- 1 no (iv) side table with drawers on both side of the bed of laminate finish- 02 nos (v) console unit and coffee table-02 nos (vi) arm chair-01 no . (vii) carpet-01 no (viii) wall paper -212 sq ft (ix) coat hanger -01 no . 1 set 5 30 (x) beeding work for bed back and side wall area-380 sq ft (xi) tv and study unit bottom drawer unit of laminate finish 8.50 sq ft (xii) tv unit panel of laminate finish area:31.50sq ft (xiii) study top unit of laminate finish. size 3 feet x 4 feet (xiii) wardrobe-provide the unit with bwp plywood of 16 mm, the unit to be of century/greenlam or equivalent laminate of 1mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. hanger rod to be fixed for coat hanging.area:104 sq ft(xv) dresser panelling including mirror back support size 4 feet x 7 feet . 1 job 31 (q) vip suite room 1 (i) tv unit: bottom unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle.: area: 1.5 feet x 2 feet (ii) texture painting for the behind sofa area size 11.5 feet x 13 feet(iii) vip bed room-tv unit bottom unit to be of century/ greenlam laminate of 1 mm thickness with premium hinges and handle. provide the paneling with bwp plywood of 12 mm, the unit to be greenlam or equivalent laminate of 1 mm thickness. groves as per the design. area: 35 sq ft (iv)beeding work for bed back and side wall area: 250 sq ft (v) study unit of laminate finish. size 2.75 feet x 6 feet (vi) wardrobeprovide the unit with bwp plywood of 16mm , the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. hanger rode to be fixed for coat hanging. 32 (r) vip bedroom room 1 - sofa - 3 seater-1 no (ii) dinning table with 4 chair-1 (iii) carpet-1 no (iv) cot with headboard- 1 no (v) mattress-8-10 inch-1 no (vi) side table with drawers on both side of the bed of laminate finish- 02 nos (vii) study chair -01 no (viii) arm chair-02 nos (ix) centre table01 no 1 set 6 33 (s) vip suite room 2 (i) tv unit: bottom unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. area: 1.5 feet x 2 feet (ii) texture painting for the behind sofa area size 11.5 feet x 13 feet(iii) vip bedroom 2 tv unit bottom unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. provide thepanelling with bwp plywood of 12 mm, the unit to be greenlam or equivalent laminate of 1 mm thickness. groves as per the design.area: 35 sq ft (iv)beeding work for bed back and side wall area: 250 sq ft (v) study unit of laminate finish. size 2.75 feet x 6 feet (vi) wardrobe -provide the unit with bwp plywood of 16 mm, the unit to be of century/greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. hanger rod to be fixed for coat hanging. area: 8 feet x 6 feet 1 job 34 (t) vip bedroom 2 - sofa - 3 seater-1 no (ii) vip 4 seaterdining table with chairs – 1no (iii) carpet-1 no (iv) cot with headboard- 1 no (v) mattress-8-10 inch-1no. (vi) side table with drawers on both side of the bed of laminate finish- 02 nos (vii) study chair -01 no (viii) arm chair-02 nos (ix) centre table-01 no . 1 set 35 wooden laminated flooring for vip room 1 and vip room2 area: 780 sq ft . 1 job 36 blinds and curtains area: 1290 sq ft . 1 job 37 (u) otm entrance (i) wall mural for the entrance wall -138 sq ft (ii) cornice design around the entrance doors frame 180 sq ft . 1 job 38 (iii) reception :marble compass design on entire lobby flooring the cost to be includes tile and laying material and labor. area- 1072 sq ft (iv) reception table -01 provide the unit with bwp plywood of 16 mm with open shelves provide the unit with century marine plywood of 16 mm, the unit to be of century. greenlam or equivalent of 1 mm thickness.area-20.30 sq f.t (v) provide the unit with bwp plywood, the paneling to be done to fix the fluted wall panel is an engineered decorative component made from compressed wood on both side and laminte of 1 mm thickness in the middle area:138 sq ft (vi) logo - ss gold letter with backlit design (vii) lobby - lift area- : provide the paneling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design area: 290 sq ft. 1 job 7 39 (viii) reception rolling chair-2 nos (x) sofa- single seater-02 nos (xi)wooden centre table- 01 no 1 set 40 (v) 1st floor lounge area- (i) provide the paneling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per design area:466.90sq ft (ii) texture paint for one wall size 11.5 feet x 20 feet . 1 job 41 lounge area (iii)sofa - 3 seater-1 no (iv) sofa - single seater-2 nos (v) sofa double seater-01 no (vi) wooden centre table- 1 no (vii) carpet of flooring- 1 no . 1 set 42 (w) mrsc ops room (i) discussion table provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century. greenlam or equivalent laminate of 1 mm thickness. electrical provision to be given with switch and sockets. size: 56 sq ft (ii) work station table- provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century. greenlam or equivalent laminate of 1 mm thickness. electrical provision to be given with switch and sockets. size: 69.53 sq ft (iii) provide the wall paneling with bwp plywood of 12 mm the unit to be of greenlam laminate of 1 mm thickness. groves to be as per design.size :575sq ft (iv) led wall panelling- provide the wall paneling around led with plywood of 12 mm and top ot laminate finishcentury/ greenlam or equivalent laminate of 1 mm thickness. shutters to be given for electrical work, size:212.75sq ft (v) wardrobe – provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. 1 size-44.80 sq ft (vi) wardrobe 2 size: 30 sq ft . (vi) wardrobe – provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. 1 size-size: 30 sq ft . 1 job 43 (vii) high back leatherette chairs-07 nos (viii) executive chairs-07 nos. 1 set 44 (ix) carpet flooring area: 582.75 sq ft 1 job 8 45 (x) 3rd floor lounge area (i) opposite to the lift wall- provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves to be given as per the design area:264.50 sq ft. (ii) lounge - provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design. area-210 sq ft (iii) 3d panel wall. area- 32 sq ft. (iv) texture paint for one wall. area:230sq ft. (v) bottom unit- bottom unit -provide the unit with bwp plywood of 16 mm, the unit to be of century/greenlam laminate of 1mm thickness with premium hinges and handle. 2 mm edge banding will be done for the shutters.area: 36 sq ft (vi) passage: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the designarea:960sq ft . 1 job 46 (vii) l sofa -3 seater-01 nos (viii) sofa- single seater- 03 nos (ix) wooden centre table-02 nos (x)corner coffee table and chair set-03 nos (xi) carpet of flooring 12 x 8 ft-1no . 1 set 47 (y) library- bookshelves display (i) - provide the unit with bwp plywood of 16 mm with open shelves, the unit to be of greenlam or equivalent laminate of 1 mm thickness. area: 322 sq ft (ii) reading table 1 - provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/ greenlam or equivalent laminate of 1 mm thickness.area: 23.20 sq ft (iii) reading table 2 - provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/ greenlam or equivalent laminate of 1 mm thickness.area: 23.20 sq ft (iv) bottom bookshelf unit. provide the unit with bwp plywood of 16 mm with open shelves, the unit to be of greenlam or equivalent laminate of 1 mm thickness. area: 28 sq ft (v) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1 mm thickness. groves will be given as per the designarea:370sq ft . 1 job 9 48 (vi) pool table - 8*4 ft size- 1 no. (vii) wooden chairs -16 nos. 1 set 49 (z) conference room- conference table (i) provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/ greenlam or equivalent laminate of 1 mm thickness. electrical provision to be given with switch and sockets. veneer polishing to be done for the same.area: 81.20 sq ft (ii) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1mm thickness. groves as per the design. area:690sq ft (iii) led wall panelling - provide the wall panelling around led with plywood of 12 mm and top of laminate finish - century/ greenlam or equivalent laminate of 1mm thickness. shutters to be given for electrical work area: 184 sq ft . 1 job 50 (iv) conference room chairs- high back leatherette chairs - 24 nos (v) chairman chairhigh back leather chair-01 nos 1 set 51 (aa) dig room (i) showcase boxing - provide the unit with bwp plywood of 16 mm with open shelves, the unit to be of greenlam or equivalent laminate of 1 mm thickness. gold pvd of ss finish with the thickness of 2 mm to be used as per the design.area: 107.25 sq ft (ii) profile light with 12 mm width and acrylic casing to be done for the same. (iii) tall open box unit - provide the unit with bwp plywood of 16 mm the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness. area: 38.50 sq ft. (iv) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design for gold inlay work. gold pvd of ss finish with the thickness of 1mm flat to be used for design work. area: 154 sq ft (iv) dig table - provide the unit with bwp plywood of 16 mm with open shelves. provide the unit with century marine or equivalent plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness. gold pvd of ss finish with the thickness of 1 mm flat will be used for design work. area-29 sq ft(iv)cornice - as per the design the same to be used in the wall and ceiling. the beeding of 25 mm to be used inside the cornice area and the same to be painted area: 280 sq ft. 1 job 10 52 (v) texture painting for entrance wall: 198 sq ft (vi) tv wall painting will be premium emulsion make asian/nippon - 2 coat putty, one coat of primer and 2 coat paint and wall paint remaining - asian premium emulsion area: 209 sq ft. (vii) false ceiling - false ceiling in sections with 12 mm gypsum board, joints sealed with gypsum compound, taped and finished. provision to be given for cove light in necessary area area: 532 sq ft. (viii) wooden ceiling: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. celling stability to be taken cutting the false ceiling area: 120 sq ft (ix) ceiling painting to be premium emulsion make asian/ nippon - 2 coat putty, one coat of primer and 2 coat paint and wall paint remaining - asian premium emulsion area: 532 sq ft . 1 set 53 (x) wardrobe - provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. area: 8 ft x 4 ft (xi)wardrobe - provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. area: 8 ft x 5 ft (xii) bathroom wardrobe - provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness and one door with full mirror area: 8 ft x7 ft . 1 job 54 (xiii) profile light with 12 mm width and acrylic casing70 nos (vi) dig table - provide the unit with bwp plywood of 16 mm size 2.9 ft x 10 ft -1 no. (xiv) cove light- around the false ceiling area : 92.50 sq ft (xv) electrical material and labor - work in the false ceiling area for led lights, cove light, shifting of light points -wires, hose pipe, flexible pipes, new switches and sockets in the necessary area.area: 532 sq ft. (xvi) provide main door (as per approved cornice design)&bathroom door size: 52 sq ft. *main 1 job 11 55 (xvii) ceiling spot -led light with metal body (round shape) -20 nos (xviii) decors and paint frame -1 no (xix) accent leatherette chairs -3 no (xv) dig chair - high back leather chair-1 no (xvi) wooden sofa - 3 seater- 1 no (xvii) wooden sofa- single seater -2 nos (xviii) wooden centre table-1 no (ix) marble top dining table ivory color with 4 chairs -1 set (xvix) carpet of flooring 9 x 5 ft-01 no* item as per scope of work. (xvx) provide wooden door for main & bathroom with frame in cornice design size (9x5) & 7x3.01 each 1 set 56 (ab) ward room (i) provide the paneling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1mm thickness. groves as per the design. area: 407 sq ft. (ii) tv wall provide the wall paneling around led with plywood of 12 mm and top of laminate finish - century/ greenlam or equivalent laminate of 1 mm thickness. shutters to be given for electrical work area: 172.50 sq ft (iii) wardrobe - provide the unit with bwp plywood of 16 mm, the unit to be of century/ greenlam or equivalent laminate of 1 mm thickness with premium hinges and handle. 2 mm edge banding to be done for the shutters. area: 32 sq ft. 1 job 57 (iv) sofa - 2 seater -1 no (v) sofa - single seater-2 nos (vi) wooden centre table-1 no (v) marble top dining table ivory color with 6 chairs . 1 set 58 (ac) ops room (i) chart table 1: provide the unit with bwp plywood of 16 mm with open shelves. provide the unit with century marine or equivalent plywood of 16 mm, the unit to be of century/ greenlam laminate of 1 mm thickness. area: 24 sq ft (ii) workstation table - provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/greenlam or equivalent laminate of 1 mm thickness. electrical provision to be given with switch and sockets.area: 81.20 sq ft (iii) discussion table - provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/ greenlam laminate of 1 mm thickness. electrical provision to be given with switch and sockets. area: 23.20 (iv) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1 mm thickness. groves as per the design area: 566 sq ft (v) tv wall panelling - provide the wall panelling around led with plywood of 12 mm and top of laminate finish -century/ greenlam or equivalent laminate of 1 mm thickness, shutters to be given for electrical workarea:172.50 sq ft . 1 job 12 59 (vi) executive chairs- 16 nos. 1 set 60 (ad) 4th floor training room (i) -provide the wall panelling around led with plywood of 12 mm and top of laminate finish - century/ greenlam or equivalent laminate of 1 mm thickness, shutters to be given for electrical work area: 218.50 sq ft (ii) elevated stage for the training room the unit with bwp plywood of 16 mm with wooden laminated flooring. proper stability to be given.area:144 sq ft (iii) stage table - provide the unit with plywood of 16 mm and top of veneer finish and the bottom to be of century/ greenlam or equivalent laminate of 1 mm thickness. size 2.9 ft x 8 ft -1 no (iv) provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1mm thickness. groves as per the design area: 241.50 sq ft . 1 job 61 (v) executive chairs -1 no. (vi) chairs with writing pad- 30 nos. 1 set 62 (ae) gym room (i) gym rubber flooring area: 352 sq ft (ii) wall panelling with mirror: provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam or equivalent laminate of 1mm thicknessarea: 352 sq ft (iii) columns - provide the panelling with bwp plywood of 12 mm, the unit to be of greenlam laminate of 1mm thickness. groves will be givn as per the design. mm area : sq ft . 1 job 63 (af) blinds and curtains (i) lounge area (ii) wardroom (iii) dig room (iv) mrsc (v) ops room (vi) gym room (vii) command library (viii) training room area: 1500 sq ft
|