|
tender for addition alteration sncos mess at af stn carnicobar.; 1 dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing) and rubbish of the premises all as specified. 2 dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded and pointed in any mortar all as specified and as directed. 3 material and labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in cm 1:6 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed.. note:- (i) the colour, shade and pattern shall be approved by the ge during execution work. (ii) no extra cost shall be allowed for removing and refixing and necesary cutting of door etc if any required during execution of work. 4 material and labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in cm 1:4 cmplete all as specified. 5 material and labour for 20-25mm thick machine cut kota stone as in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and as directed. 6 material and labour for granite 20mm thick ( of any type table rubbed and polished) work machine cut as in steps, jambs pillars,window cills, cooking platforms and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite and laidover and including 15mm thick cement mortar 1 :4 complete all as specified and directed. 7 material and labour for rounding to edges of granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed 8 demolition of reinforced cement concrete of any description ad in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. 9 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out getting out complete all as specified and as directed. 10 returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. 11 removing excavated material (soil) n.exc 50 m and depositing where as directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. 12 material and labour for plain cement concrete 1:4:8 type d2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed. 13 demolition of brick work / stone boulder / pcc block masonary, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works,precast concrete articles and precast concrete block wallings complete all as specified and as directed. 14 m&l for pre-cast cement concrete block masonry withsolid blocks using type c1(1:3:6) (20mm graded aggregate) ,size exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. 15 materialand labour forplain cement concrete 1:2:4 type b1 using 20mm graded granite stone aggrgate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed platesand the like including weathering, slightly rounded or chamfered angles and throatingincluding use of necessary form work all as specified and as directed. 16 material and labour for providing reinforced cement concrete 1:2:4 type b1 nominal mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. note : reinforcement and form workshall be measured and paid separately. 17 use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams to rough finished surface of concrete for flat complete all as specified and as directed. 18 material and labourfor tmt bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 19 taking up or down steel tubing /cpvc pipe 15 mm bore including connections, cleaning for refixing or removal to storeall as directed. 20 supply and fixing galvanised steel water tubing medium grade 15 mm bore including all necessary fittings such as bends, l bows, short piece connections, backnuts, caps plugs, unions couplings, flanges, sockets etc,fixed to wall/floor/ceilingincluding necessary cutting/chauging in walls made of brick/concrete surface complete all as specified and as directed. 21 supply and fixing in repairs vitreous china wash hand basin, white (flat back or angle back type or counter top) of size 600x480mm including pedestal, 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in cm 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed. 22 supply and fix in repair 15mm dia pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw foriron pipe 23 supply and fix stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 24 supply and fix in repairs stainless steel grating 125 mm dia with waste pipe holecomplete all as specified and as directed. 25 supply and fixin repairs waste coupling of ptmt 32 mm size (half or full threaded) suitable for urinals/ whb/sink etc (minimum weight 32 mm - 45 gms) all as specified and as directed. 26 supply and fixing in repairspvc waste pipe 32mm dia with 40mm dia reducer, 90cm long for whb/urinal outlet with 4 nos screws for fixing pipes, complete all as specified and directed. 27 supply and fix in repairs pvc connections 15mm size with ptmt nuts of length 600mm complete all as specified and directed. 28 supply and fix soap dish holder recessed type (stainless steel) fixed to plugs with chromium plated brass screws of approved quality complete all as specified and as directed.make: parryware/hindware/cera 29 supply and fixing in repairs towel rails tubular brass chromium plated 20 mm dia d type 60 cm long between flanges complete all as specified and directed. 30 taking down chowkats or frames exceeding 1.5 sq. m but not exceeding 4 sq. m each (without taking off shutters from the frame) complete all as specified and directed. 31 supply and fix aluminium powder coated (minimum thickness of powder coating 50 micron), frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.note:glass panel/particle board panel filling shall be measured and paid separately. 32 supply and fix powder coated aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed. 33 s&f anodised aluminium window and ventilator shutter, side hung type type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, rubber neoprene packing, anodised aluminium snap beading, scews anodised aluminium fittings such as peg stay 150mm long (01 no), hinges type b-21 100mm long (02 no) suitable handle (01 no) complete all as specified and as directed. 34 supply and fix powder coated aluminium grill (anodised transparent or dyed to required shade according to is: 1868 with minimum coating of grade ac 15) of dg 102 design/pattern, with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. 35 supply and fix in 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type b-21 complete all as specified and directed. 36 supply and fixing aluminium alloy,anodised, sliding door boltof length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed. 37 supply and fix 150mm long aluminium anodised barrel tower boltof extruded section all as specified and as directedby eng-in-charge. 38 supply and fixing 5.5mm thick glass, ordinary quality and glazing with oil and putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. 39 supply and fix solar control film 50 micron reflective type sticked to glass panes as per instructions of manufactures complete all as specified and as directed. 40 material and labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with rubber beading and screws as in aluminium works etc completeall as specified and directed. 41 s&f in repairs decorative/fancy type curtain rod brackets of stainless steel suitable for 25mm dia stainless steel decorative certain rod/pipe.(as per sample kept in ges office) 42 s&f in repairs decorative/fancy type curtain rod brackets of stainless steel suitable for 25mm dia stainless steel decorative certain rod/pipe.(as per sample kept in ges office) 43 taking down cement plastering on concrete or brick works surface racking out joints, hacking for key , scrubbing down with water, removing rubbish/debris etc complete all as specified and as directed. 44 material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in cm 1:6, finished even and fair without using extra cement complete all as specified and directed. 45 material and labour for 15 mm thick renderingon brick/concrete surfaces in two layers in cm 1:4, finishing coat of 5mm thick, finished even and smooth without using extra cement complete all as specified and as directed. 46 material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 3mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. 47 material and labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. 48 material and labour for complete removal of existing treatment on wall surfaces, preparation ofsurfaces of walls and applying two coats ofacrylic distemperof approved shade/tint over a coat of primer,over 3mm thick wall care putty finish to achieveuniform smooth surface of wallall as specified and as directed. 49 material and labour for complete removal of existing treatment on wall surfaces, preparation of surfaces including removal of fungus growth if any, filling the cracks and applying two or more coats of 100% premium acrylic emulsion paint having voc not less than 50 gm/lit and uv resistance as per is 15489-2004, dust, alkali and fungal resistant, of approved shadewith silicon additives @ 1.43 lit/10sqm over a coat of primer @ 0.9lit per 10 sqm complete all as specified and as directed. 50 dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed. 51 dismantling plain or corrugated steel sheeting, any gauge,thickness, including nainital or similar pattern roof coverings complete all as specified and as directed. 52 supply and fix structural steel work in tubular trusses including special shaped washer of 6mm thick ms sheeting etc complete using erw or induction butt welded tubes conforming to is - 1161-1979 grade st.-240,all as specified and as directed. 53 supply and fix mild plate(plain or chequerred), channel, square cut or notched(ordinary or counter sunk) forming holes with riveted, bolted or welded attachment to bottom of pipe conforming to fe 410-w quality a(gde-e-250) complete all as specified and directed. 54 s&f prepainted galvalume aluminium zinc coating gi based corrugated steelsheet 0.50 mm thick of an colour having tensile strength 550 mpa as in roof coveringin roof covering /cladding to wall,fixed withself tapping screws including providing of rubber washer/bitumen washer with filling of bitumen between joint of sheet and self tapping screws complete all as specified. 55 m&l for ms work as in wind tie in roof and ms structural works in trusses, etc with screwed ends including nuts, washers and mild steel plates for walls chimneys, roofs arches etc any kind rods and straining bolts conforming to fe 410-0 or fe 310-0 complete all as specified . 56 material and labour forpreparation of newor previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed. 57 material and labour for preparation of old steel surfaces of any description, not otherwise described,over 10cm width or girth andapplying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. 58 dismantlingwall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. 59 supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main tee of size 40 x 40 x 2mm, cross tee of size 40 x 40 x 2mm and wall angle of size 40 x 40 x 2mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia g.i. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of g.i. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of with 4mm thick non asbestos boards, ordinary type for fixing in 600 mm x 600mm grid, fixed in ceiling, flat or sloping, complete all as specified and directed.note :- rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site. 60 s&f in repair pvc (swr) pipes 110 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. 61 s&f pvc (swr) bend 110 mm dia with access door complete all as specified and as directed. 62 m & l for point wiring using 1.5 sqmm lsi marked 1.1 kv grade single core fr ls flexible cable, conforming to is: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to is: 8130-1984 and insulation conforming to is:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in and including not less than 20 mm nb pvc medium grade conduits (concealed), conforming to is: 9537 (part 3)- 1983, colour coded as specified in is: 11353-1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to is: 14772- 2000 and suitable for modular cover-plates complete all as specified in is: 732-1989 and directedfor the following:-. 63 (a ) one light point or one fan point controlled by one switch 5 amps 64 (b) one 3pin socket outlet 5 ampsonsame board 65 (c) one 3pin socket outlet 5 ampspoint controlled by one switch on independent board. 66 m & l for point wiring using 2.5 sqmm lsi marked 1.1 kv grade single core fr ls flexible cable, conforming to is: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to is: 8130-1984 and insulation conforming to is:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in and including not less than 20 mm nb pvc medium grade conduits (concealed), conforming to is: 9537 (part 3)- 1983, colour coded as specified in is: 11353-1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to is: 14772- 2000 and suitable for modular cover-plates complete all as specified in is: 732-1989 and directedfor 6 pin switch socket outlet 5 amp on independent board complete all as specified and directed by engineer in charge:-. 67 m & l for point wiring using 4 sqmm lsi marked 1.1 kv grade single core fr ls flexible cable, conforming to is: 694-1990, having multi-drawn thin strands of electrolytic copper conductors, conforming to is: 8130-1984 and insulation conforming to is:5831-1984, for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in and including not less than 20 mm nb pvc medium grade conduits (concealed), conforming to is: 9537 (part 3)- 1983, colour coded as specified in is: 11353-1985, including factory made sunken, galvanized, not less than 1.00 mm thick modular flush sheet metal enclosure having top, bottom, side and back-wall knockout for conduit entry from any direction, conforming to is: 14772- 2000 and suitable for modular cover-plates complete all as specified in is: 732-1989 and directedfor 6 pin switch socket outlet 15 amp on independent board complete all as specified and directed by engineer in charge:-. 68 supply and fix socket outlet 5 pin,6 amps andac 230 volts flush type complete all as specified and as directed. 69 supply & fix switch socket combination outlet, 6 pin, 6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by engineer in charge. 70 supply & fix switch socket combination, 6 pin, 15/16amps, multipurpose , flush, shutter type, 230 volt flushtype, white/ivory finish with fixing hole complete all as specified and directed by engineer in charge. 71 supply and fixswitch piano flush type 5 amps single pole, one way, 240 volts complete all as specified and as directed. 72 s&f in repairs led panel square, slim compact, aluminum die cast edge led recess mounted square downlightfixture panel fitting 36 watt, 220 v ac recessed type with high efficiency pmma diffuser soft glare free even light distribution with driver suitable for roof ceiling of size 600 x 600mm, connecting up with driver three core flexible copper conductor cable and fixture, complete all as specified and directed by engr-in-charge.make- philips/bajaj/crompton /havells. 73 supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 v, 1200 mm sweep min air delivery 210 cfm service value 6.00 bee. five star rated with brushless direc current motor (bldc), complete all as specified and as directed. 74 supply and fix single pole and neutral enclouser with a two pin and earth plug and socket complete with one mcb single pole 20 amps complete all as specified and directed. 75 supply and fix mcb sp 6-32 amp rating 240v, 10ka b curve miniature circuit breaker (mcb) of single pole in the mcb db,ip 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 sqmm cross sectional area complete including suitable size copper lugs complete all as specified and directed.make: indo asian/ l&t/crompton greaves/havells 76 supply and fix mcb spn 40 to 63 amp rating 240v, 10ka c curve miniature circuit breaker (mcb) of single pole in the mcb db complete with connection testing and commissioning complete all as specified and directed.make: indo asian/ l&t/crompton greaves/havells 77 supply and fix distribution board (db) made out of sheet metal enclosure (crca sheet), dust and vermin proof, spn 8 way with 200 amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, mcbs used as incommer flush to wall complete all as specified and as directed. 78 material and labour for sub main wiring using two runs of single corepvc insulated cable (frls) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (frls)using as earth wire drawn through and including suitable sizerigid non-metallic pvc conduit, complete all as specified and directed. note-3 run of 4 sqmm pvc copper wire and one run of pvc conduit shall be measured and paid as oneunit. 79 material and labour for sub main wiring using two runs of single corepvc insulated cable (frls) 10 sqmm copper conductor multi stranded and one run of 10 sqmm copper conductor insulated cable (frls)using as earth wire drawn through and including suitable sizerigid non-metallic pvc conduit, complete all as specified and directed. note-3 run of 10 sqmm pvc copper wire and one run of pvc conduit shall be measured and paid as oneunit. 80 cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed conduit wiring and making good, cutting not exc 10 cm girth,& as per site reqirement. complete all as specified and directed by engineer in charge. 81 supply and fixing soltero solar garden light fitting 05 watts, with 3.7v 5200mah battery, 4.5w/5v solar panel, automatic on/off using in-built ldr sensor, housing and heat shrink in alluminium extruction, ip 65 protection , fixed to foundation, including all fixing accessories such as base plate, anchor bolt embeded in foundation, nuts and washer etc, all as per manufactures instruction,complete all as speficifed and as directed by engr in chargemake: make - luker model no. lbrsol600 equivalent in phillips, havells, bajaj, cromptonnote: (a) the quoted rate includes the cost ofexcavation for foundation & pcc foundation of size 20cm x 20cm x 40cm, pcc 1:3:6, type c2, using 40 mm graded aggregate, and rendering the concrete surface above the ground level(20cm hight) and top surfaces with cm 1:4 all as directed bv enar-in-charae. 82 schedule of credit (minus) rs.5038.00note: bidder shall insert credit amount of rs. 5038.00 as ratein green field under col-13.
|