|
tender for special repair of bldg no t-23 of hq 118 (i) inf bde gp camp at nimu mil stn under age (i) nimu; 1 dismantling timber scantling 40 sqcm and over in section, in any position in framed work in scantling etc complete all as specified and directed by engr-in-charge. 2 m&l second class hard wood in clean sawn timber fixed and fixed in scantlings complete all as specified and directed by engr-in-charge. 3 dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in framed work complete all as specified and directed by engr-in-charge. 4 m & l for 2nd class hard wood plain fillets. exc. 13 & n.exc 25 sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by engr-in-charge.. 5 all as per item no 4 , but exc 3 & n.exc 6 sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in beadding complete all as specified and directed by engr-in-charge. 6 dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and directed by engr-in-charge. 7 m & l prelaminated particle board 9mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nailsin ceiling, flat or slopingto timber frame work complete all as specified and directed by engr-in-charge. 8 s&f 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails to timber frame work as in walls all as specified and directed. 9 taking down chowkhats or frames exc 1.5 sqm but not exc. 4 sq. m each but with shutters(without taking off shutters from the frames) complete all as specified and directed by engr-in-charge. 10 taking down chowkhats or frames n exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed by engr-in-charge. 11 m&l 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by engr-in-charge. 12 m&l 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors complete all as specified and directed by engr-in-charge. 13 s&f mild steel 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by engr-in-charge. 14 s&f mild steel 75mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by engr-in-charge. 15 s&f extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and directed by engr-in-charge. 16 s&f extruded aluminium alloy handles, fabricated type, anodised 100mm long complete all as specified and directed by engr-in-charge. 17 s&f mild steels sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed by engr-in-charge. 18 s&f aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (isi marked), complete all as specified and directed by engr-in-charge.. 19 s&f aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (isi marked), complete all as specified and directed by engr-in-charge.. 20 demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by engr-in-charge 21 m&l 75mm thick cement concrete type d- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed by engr-in-charge 22 m&l for chequered cement concrete tiles 20cm x 20cm x25mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigment in floors over screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete all as spd and directed byengr-in-charge. 23 m&l for light shade virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. incl 15mm thick screed bed in cm 1:4, set and jointedin neat cement slurry and pointed in white or coloured cement to match complete all as specified. 24 m&l for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats ofsynthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and directed by engr-in-charge. 25 m&l for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats ofsynthetic enamel (ordinary tint)complete all as specified and directed by engr-in-charge 26 m&l for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats ofsynthetic enamel (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified and directed by engr-in-charge 27 dismantling plain or corrugated steel sheeting,any gauge, thickness, including nainital or similar pattern roof coverings 28 s&fpre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified 29 s & f pre-painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified 30 m&l forprecast cement concrete block in pcc 1:3:6 type c1 (using 20 mm graded aggregate) masonry with solid block exc. 10 cm in width and setting in mortar 1:4 complete all as specified. 31 demolition ofprecast concrete block wallingmasonry, built in cement mortar all as specified and directed 32 m&l for rendering 15mm thick on fair faces of concrete block masonry surfaces in cement mortar (1:4) 33 m&l for rendering 10mm thick on fair faces of concrete block masonry surfaces in cement mortar (1:6) 34 m&l preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer all as specified and directed by engr-in-charge. 35 m&l preparing new plastered surfaces of walls and chalk whiting, on plastered surfaces, prepara-tory to distempering applying two coat of distemper oil emulsion white or tinted 36 s&f for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates fe-290 (gde e-165) 37 framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) andhanging; also fastening and fixing complete fe-410- w(gde- e-250) quality- b 38 dismantling wrought iron or mild steel work of any description not otherwise provided for 39 m&l for non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.over 15mm thick screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. 40 m&l glazed ceramic tile coloured 450mmx 300mm x 7mm as in verticle surface such as skirting /dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and incl 10mm thick bedding layer in cement mortar 1:4on concrete block wall surface complete all as specified. 41 taking down or up steel tubing and connections incl cleaning for refixing or removal to store for 15 mm dia bore. 42 s&f for 25mm outer dia 3-layer pp-r p o l y p r o p y l e n e random copolymer) concealed pipes sdr 7.4 (pn16) uv stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all pp-r plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. 43 dismantling broken water tank of cap exc 500ltr but n exc 1000 ltr 44 s&f for 1000 ltr cap rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i 45 s&f in repair vitreous china wash down water closed pan pedestal pattern white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint arrangements with fixing bolts etc including making good the distrubed portion of floor in cement concrete 1:2:4 type b-0, asin repairs complete all as specified & directed by engr-in-charge. 46 s&f in repair pvc valveless 10 ltr cap, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 47 s&f in repair vitreous china wash basin, white, flat back,size 550x400mm ovel type/round/anyshape including brackets and pedestal complete in all respect as specified. 48 s&f in repair vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and union fordischarge pipe. (exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified. 49 s&f in repair 15mm fancy type bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 50 s&f in repair 15mm dia angle cock/stop valves, cast copper alloy,screwed down, high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified 51 s&f in repair for 15mm pvc connections of 600mm long with ptmt nuts complete all as specified. 52 s&f in repair 15mm dia fancy type pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. 53 s&f in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. 54 demolition of stone/boulders masonry, laid dry complete all as specified. 55 demolition ofstone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles 56 m&l for stone masonry walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified. 57 m&l for stone masonry walling of random rubble, uncoursed, well bonded, and solidly heartd laid dry as directed and as specified. 58 demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) 59 use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not ex ceeding 200mm thick with flat rough finished surfaces ofconcrete, complete all as specifed and directed by engr-in-charge. 60 m&l for rcc 1:2:4 type b-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs complete all as specified and directed by engr-in-charge. 61 m&l for cement concrete 1:4:8 type d2 (using 40mm graded crushed stone aggregate ) in foundation, filling and mass concrete complete all as specified and directed by engr-in-charge. 62 m&l for precast reinforced cement concrete, type b-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in manhole cover set in cement mortar 1:4, compete all as specified and directed. 63 tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 64 demolition and breaking up drain pipes (salt glazed ware, ac or reinforced concrete) set in cement mortar of internal dia 75-100mm incl any earth work and demolition of pcc complete all as specified and directed. 65 pvc (swr) pipessingle socketed, in any length with rubber ring joints, laid in trenches or floor of 110mm bore pipe complete all as specified and directed by engr-in-charge 66 s&f for 110 mm bore pvc (swr) bends any radius ® 67 pvc (swr) vent cowl of 110mmbore, complete all as specified as directed. 68 pvc (swr) pipessingle socketed, in any length with rubber ring joints, laid in trenches or floor of 75mm bore pipe complete all as specified and directed by engr-in-charge 69 pvc (swr) floor trap of 75mm plain with grating including jointing with solvent cement 70 m&l for 100mm thick cement concrete 1:3:6 type c2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; 71 demolition of stone slabs and tiles of any description laid, bedded and pointed in in any mortar or thickness in floors, aprons etc. 72 m&l for 20mm thick granite (of any type) tiles machine cut, bedded including screed bed or bedding layer of mortar 15 mm thick in cm 1:4 for laying finishes and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete 73 m&l for5.5mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square exc 0.5 sq. m in each pane including securing glass in metal frame 74 s&ffor anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 75 s&f for anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified 76 m&l for4.8mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square exc 0.5 sq. m in each pane including securing glass in metal frame 77 m&l for 12mm thickprelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with metal frame. 78 taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 79 m & l point wiring with 1.5sqmm (nominal area) frls pvc insulated unsheathed multistranded copper conductor cable in and including pvc concealed conduit 20 mm dia medium grade isi marked including fittings and accessories with continues pvc insulatedcopper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including metal flush box and white cover plate with frame complete one light point/one fan point controlled by one switch 80 m & l point wiring with 1.5sqmm (nominal area) frls pvc insulated unsheathed multistranded copper conductor cable in and including pvc concealed conduit 20 mm dia medium grade isi marked including fittings and accessories with continues pvc insulatedcopper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including metal flush box and white cover plate with frame complete one 3 pin 5 amps socket outlet independent with cables 1.5 sqmm size 81 m & l point wiring with 1.5sqmm (nominal area) frls pvc insulated unsheathed multistranded copper conductor cable in and including pvc concealed conduit 20 mm dia medium grade isi marked including fittings and accessories with continues pvc insulatedcopper cable with copper conductor of same size as in phase/neutral/earth cable connecting to common earth dolly including metal flush box and white cover plate with frame complete one 3 pin 5 amp socket outlet on same board. 82 all same as per item no 80 above but with conductor of size 4 sqmm (nominal area) for one 3 pin socket outlet 15 amps on independent board complete and earth continuity wire with 4 sqmm pvc insulated stranded copper conductor cable. 83 s&f repair socket 2 in 1, 5 pin 5 amp flush type complete all as specified. 84 s&f repairswitch piano flush type 5 amp, single pole, one way complete all as specified and directed. 85 s&frepair switch socket combination 2 in 1, 3 pin, 5 amp flush type complete all as specified and directed. 86 s&f in repair switch socket combination 2 in 1, 3 pin, 15/16 amp flush type universal complete all as specified and directed. 87 m&lin repair for ceiling rose surface bakelite 65x50mm two to three terminal complete all as specified and as directed by engr-in-charge. 88 s&fin repair basic all purpose surface and wall mounted led batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long,with all accessories complete all as per specified and as directed by engr-in-charge. 89 supply and fixing led lights fittings 10/12 watt, 220 v, ac decorative box type with driver , holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 90 supply and fixing led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. 91 s&fin repair sheet metal powder coated versatile double door spn distribution board,12 way suitable for mcbs fitted with copper bus bar rated 200amps, neutrallink , earth bar and din rail suitable for use on 240 volt, 50hz . 92 m&lin repair for mcb spn 63 amp, 240v with 10ka breaking capacity of c series in distribution boards all as specified and directed. 93 s&f in repairs to mcb sp 6-32 amp with 10ka breaking capacity of c series in distribution boards all as specified and directed. 94 supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape armoured with galvanised steel wire or tape and overall pvc sheathed 2 core 10 sq. mm nominal cross section in service connections 95 earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt,connected to galvanized earh lead wire of size 4.0 mm dia by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in electrical plate no. 3, wire protected by dia 15 mm bore light grade gi pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia gi light grade including wire mesh funnel, pcc, earth chamber pit with pcc 1:2:4 type b-1 using 20 mm grade stone aggreate including form work cement mortar including ci pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified.
|