|
tender for annual plan-jp pta 2025-26 proj no : 206/26--kudivella padhathi at puramattom govt vhss-general civil work-1 well maintenance 1.001 15.9.2:demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer -in- charges:in cement mortar 1.002 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge. 1.003 50.2.3.1:pumping or bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete 1.004 od300964/2025-2026:man required for cleaning debris and removing mud from well 1.005 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil 1.006 2.26.1:extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.all kinds of soil 1.007 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 1.008 5.9.12:centering and shuttering including strutting, etc. and removal of form for:well steining 1.009 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 1.01 od301989/2025-2026:erecting and fixing precast concrete ring for well including all labour charges etc complete as per the direction of departmental officers at site 1.011 od302016/2025-2026:supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the gap between well and concrete ring, in required thickness, for all leads & lifts, all complete as per direction of engineer -in-charge 1.012 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 1.013 50.6.1.1:solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to is 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: cm 1:6 ( 1 cement : 6 coarse sand) etc complete 1.014 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 1.015 13.33.1:pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):flush/ ruled pointing 1.016 10.25.2:item shifted to sub head 14 as item 14.73item shifted to head 14 as item 14.74steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 1.017 14.1.2:repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:cement mortar 1:4 ( 1 cement: 4 coarse sand) 1.018 13.43.1:applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:water thinnable cement primer 1.019 13.60.1:wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:two or more coats on new work 1.02 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 1.021 od302282/2025-2026:surface dressing of ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m.all kinds of soil. 1.022 od302342/2025-2026:dry rubble masonry with hard stone in foundation and superstructure including packing to compactness to lines and levels, cost and conveyance of all materials labour charges etc. complete as per approved drawing and relevant technical specifications. 1.023 od302325/2025-2026:dr with departmental. stone - dry rubble masonry _ dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of departmental officers at site 1.024 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 1.025 5.9.5:centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 1.026 30.2.58:providing and fixing of tuflex garden fencing hexagonal net/or equivalent of green colour having contents weight grams/sqm. 510 (+/- 8%) in width of 60 cm. with bamboo of 90 cm. length and 18-20 girth. the bamboo should be painted with green colour paint of approved brand and manufacture two or more coats and fixed 30 cm. below ground level and 60 cm. above ground level at a distance of 1.50 mtrs. the net and bamboo should be binded with 2 mm. g.i. wire at equal distance of three places in each bamboo complete and as per direction of engineer-in-charge. 2 plumping system 2.001 od302630/2025-2026:supplying and fixing 1.5 hp submersible pump and motor with starter and all other necesary electrical connections for fixing the motor and all fitting charges 2.002 od300149/2025-2026:supply and providing kanflex hose 25mm including all labour charges etc complete 2.003 od300185/2025-2026:supply and fitting 32 mm non return valve using required bolt and nut and flange etc 2.004 od300262/2025-2026:supply conveyance and providing nylon rope for hanging sub-pump set 2.005 50.18.9.6.1:providing and fixing pvc pipes includings jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 50 mm dia 10kgf/cm2 2.006 50.18.9.16.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 50 mm dia 10kgf/cm2 - external work - exposed on wall 2.007 50.18.9.3.2:providing and fixing pvc pipes includes jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. 25 mm dia 10kgf/cm2 2.008 50.18.9.14.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 32 mm dia 10 kgf/cm2 - external work- exposed on wall 2.009 50.18.9.4.1:providing and fixing pvc pipes includings jointing of pipes with one step pvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge.32 mm dia 10.kgf/cm2 2.01 18.33.1:constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and rcc top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:with common burnt clay f.p.s (non modular) bricks of class designation 7.5 2.011 18.17.4:providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :50 mm nominal bore 2.012 od302424/2025-2026:providing and fixing pvc rigid fitting / accessories for pvc pipes, including jointing with pvc solvent cement-50 mm dia socket /coupling 2.013 od302430/2025-2026:providing and fixing pvc rigid fitting / accessories for pvc pipes, including jointing with pvc solvent cement-32 mm dia socket /coupling 2.014 od302448/2025-2026:providing and fixing pvc rigid fitting / accessories for pvc pipes, including jointing with pvc solvent cement-25 mm dia socket /coupling 2.015 18.15.2:providing and fixing brass bib cock of approved quality :20 mm nominal bore 2.016 od303353/2025-2026:providing and fixing granite name board of size 120 x 60 cm as per the direction of engineer in charge
|