|
tender for repair to uttarsasan-kairi in the district of puri for the year 2025-26- 1 clearing & grubbing road land including uprooting rank vegetation , grass, bushes,shrubs, saplings & trees girth upto 300 mm, removal of stumps of such trees cut earlier & disposal of unserviceable materials by manual means & stacking of serviciable materials to be used or acutioned, upto a lead of 1000 m including removal & disposal of top organic soils not exceeding 150 mm in thickness as per technical specification clause 210 & as per direction of the engineer-in-charge. 2 earth work excavation in foundation in hard soil within 50 m initial lead & 1.5 m initial lift including rough dressing & breaking clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.3 m in depth & as per the direction of the engineer-in-charge. 3 filling in foundation and plinthwith sand wellwatered and rammed includingcost, conveyance, royalty, taxes of all materials, labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. 4 cement concrete (1:2.5:5) with 40mm sizehard black crusher broken granite stone chipsof approved quality and from approvedquarry including hoisting, lowering and layingconcrete and compacting by using vibrator watering and curing for 4 weeks centering and shutteringand finishingthe exposedsurface smooth providing grooves or beads where necessary including cost, conveyance, royalities and taxes of all materialsand labour with t&p required for the work etc. complete excluding cost and conveyance ofm.s. rods or tor steel and binding wires of18 to 20 gaugeand labour charges for straightening cutting bending etc. of them.s. rods or tor steeland tying the grills andplacing in proper position as per specification and direction of the engineer-in-charge. 5 foundation 6 above foundation 7 labour for scraping cleaning the road suface applying tack coat using3.0 kg of bitumen for 10 sqm and laying 37.5 mm thick built up spray grouting in one layer using 0.45 cum of 25 mm to 40 mm size hard granite metal and 12.00 kg penetration grade of bitumen for 10 sqm with 0.12 cum of 12 mm size hard granite chips as key stone for 10 sqm spreading over and laying includingheating pouring and spreading over and spreading bitumen metal and chips and rolling with prr including hire and running charges of prr and all other machineries but excluding cost and conveyance of bitumen ,metal and chips complete as per specification and direction of engineer in charge. 8 providing and applying tack coat using bitumen @0.2kg per sqm on the prepared bitumenous surface/granular base treated with primer/ granular base (not primed)cleaned surface including cost of all materials, labour , t&p etc. complete as per the specification and direction of the engineer-in-charge. 9 providing and laying semi dense graded bituminous concrete with batch type hot mix plant using crushed agreegates of specified grading , premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment, rolling with smooth wheeled ,vibratory and tandem rollers to achive the desired compaction as per clause 508 of mosrt&h specification for the road and bridge works (4th revision) . 10 providing the road surface in the both sides of berm manually with approved quality of moorum including all labour charges for spreading, laying, levellingfor the work including cost, conveyance, royality and taxes of all materials, finished item of works as per the specification and direction of the engineer-in-charge.
|